Research on Optimal Pose Set Planning Method under Physical Constraint Robot Kinematics Calibration

被引：0

作者：

Jiang J. ^{[1
]}

Hou J. ^{[1
]}

Su C. ^{[2
]}

Ba Q. ^{[1
]}

Tian A. ^{[1
]}

Xu M. ^{[1
]}

机构：

[1] School of Mechanical and Electrical Engineering, Changchun University of Science and Technology, Changchun

[2] School of Artificial Intelligence, Changchun University of Science and Technology, Changchun

来源：

Zhongguo Jixie Gongcheng/China Mechanical Engineering | 2024年 / 35卷 / 03期

关键词：

industrial robot; interval evaluation; kinematic calibration; optimal pose set; physical constraint;

D O I：

10.3969/j.issn.1004-132X.2024.03.009

中图分类号：

学科分类号：

摘要：

In the processes of kinematics calibration of industrial robots under physical constraints, the calibration accuracy was affected by the selection of the pose set, which in turn was constrained by the calibration devices. To solve these problems, an optimal pose set planning method was proposed based on sampling interval evaluation combined with pose set optimization. Firstly, the robot kinematics model and the distance constraint calibration model were established, and the robot system parameter error constraint equation and error Jacobian matrix were calculated. Secondly, the workspace of robot was divided into spatial grids and evaluate each grid interval using Latin hypercube sampling combined with observable indicators to obtain the optimal sampling interval. Finally, based on offline data, the calibration accuracy prediction model was established based on offline data and search for the optimal pose set within the optimal sampling interval. By planning and verifying the optimal pose set for the ZhongRui RT-608 robot, the results show that the average fitting sphere radius after calibration is 0.3947 mm based on the optimal pose set, which is 57.98% lower than that of the random pose set. © 2024 Chinese Mechanical Engineering Society. All rights reserved.

引用

页码：472 / 480

页数：8

共 20 条

[11] ZHOU Jian, NGUYEN H N, KANG H J., Selecting Optimal Measurement Poses for Kinematic Calibration of Industrial Robots [J], Advances in Mechanical Engineering, 6, (2014)
[12] LE P N, KANG H J., A New Manipulator Calibration Method for the Identification of Kinematic and Compliance Errors Using Optimal Pose Selection [J], Applied Sciences, 12, 11, (2022)
[13] JIANG Zhouxiang, HUANG Min, TANG Xiaoqi, Et al., Observability Index Optimization of Robot Calibration Based on Multiple Identification Spaces [J], Autonomous Robots, 44, 6, pp. 1029-1046, (2020)
[14] CHEN Xiangzhen, ZHAN Qiang, The Kinematic Calibration of a Drilling Robot with Optimal Measurement Configurations Based on an Improved Multi-objective PSO Algorithm [J], International Journal of Precision Engineering and Manufacturing, 22, 9, pp. 1537-1549, (2021)
[15] WAN Ziwei, ZHOU Chunlin, ZHANG Haotian, Et al., Development of an Onsite Calibration Device for Robot Manipulators [J], Frontiers of Information Technology &- Electronic Engineering, 24, 2, pp. 217-230, (2023)
[16] STEPANOVA K, ROZLIVEK J, PUCIOW F, Et al., Automatic Self-contained Calibration of an Industrial Dual-arm Robot with Cameras Using Self-contact, Planar Constraints, and Self-observation _J], Robotics and Computer-Integrated Manufacturing, (2022)
[17] SU Chengzhi, WU Wenhua, WANG Lang, Et al., Fast Calibration of Robot Positioning Accuracy with Multiple PSD Distance Constraints[J], Modular Machine Tool &- Automatic Manufacturing Technique, 2022, 9, pp. 7-10
[18] CHANG H, LU Shuzhou, SUN Yue, Et al., Multi-objective Optimization of Liquid Silica Array Lenses Based on Latin Hypercube Sampling and Constrained Generative Inverse Design Networks [J], Polymers, 15, 3, (2023)
[19] CAO Jian, GENTON M G, KEYES D E, Et al., Sum of Kronecker Products Representation and Its Cholesky Factorization for Spatial Covariance Matrices from Large Grids[J], Computational Statistics &- Data Analysis, 157, (2021)
[20] SU Chengzhi, LI Yuchun, LIU Sen, Et al., Simulation Data-driven Robot Kinematic Parameter Calibration with Optimal Pose Set Selection [J/OL], Mechanical Science and Technology, pp. 1-6

← 1 2 →