Research on Optimal Pose Set Planning Method under Physical Constraint Robot Kinematics Calibration

被引：0

作者：

Jiang J. ^{[1
]}

Hou J. ^{[1
]}

Su C. ^{[2
]}

Ba Q. ^{[1
]}

Tian A. ^{[1
]}

Xu M. ^{[1
]}

机构：

[1] School of Mechanical and Electrical Engineering, Changchun University of Science and Technology, Changchun

[2] School of Artificial Intelligence, Changchun University of Science and Technology, Changchun

来源：

Zhongguo Jixie Gongcheng/China Mechanical Engineering | 2024年 / 35卷 / 03期

关键词：

industrial robot; interval evaluation; kinematic calibration; optimal pose set; physical constraint;

D O I：

10.3969/j.issn.1004-132X.2024.03.009

中图分类号：

学科分类号：

摘要：

In the processes of kinematics calibration of industrial robots under physical constraints, the calibration accuracy was affected by the selection of the pose set, which in turn was constrained by the calibration devices. To solve these problems, an optimal pose set planning method was proposed based on sampling interval evaluation combined with pose set optimization. Firstly, the robot kinematics model and the distance constraint calibration model were established, and the robot system parameter error constraint equation and error Jacobian matrix were calculated. Secondly, the workspace of robot was divided into spatial grids and evaluate each grid interval using Latin hypercube sampling combined with observable indicators to obtain the optimal sampling interval. Finally, based on offline data, the calibration accuracy prediction model was established based on offline data and search for the optimal pose set within the optimal sampling interval. By planning and verifying the optimal pose set for the ZhongRui RT-608 robot, the results show that the average fitting sphere radius after calibration is 0.3947 mm based on the optimal pose set, which is 57.98% lower than that of the random pose set. © 2024 Chinese Mechanical Engineering Society. All rights reserved.

引用

页码：472 / 480

页数：8

共 20 条

[1] YANG Wentao, ZHAN Jun, SHE Yong, Et al., Summary of Optimization Methods for Absolute Positioning Accuracy of Industrial Robots[J], Surface Engineering & Remanufacturing, 19, 2, pp. 28-32, (2019)
[2] WANG Haixia, WU Qingfeng, WU Xiangbin, Et al., Research on Error Compensation Method of Robot Positioning Accuracy[J], Mechanical &- Electrical Engineering Technology, 51, 5, pp. 116-118, (2022)
[3] LIAO Wenhe, TIAN Wei, LI Bo, Et al., Error Compensation Technology and Its Application Progress of an Industrial Robot[J], Acta Aeronautica et Astronautica Simca, 43, 5, pp. 9-30, (2022)
[4] KLIMCHIK A, CARO S, PASHKEVICH A., Optimal Pose Selection for Calibration of Planar Anthropomorphic Manipulators [J], Precision Engineering, 40, pp. 214-229, (2015)
[5] MENQ C H, BORM J H, LAI J Z., Identification and Observability Measure of a Basis Set of Error Parameters in Robot Calibration [J ], Journal of Mechanisms, Transmissions, and Automation in Design, 111, 4, pp. 513-518, (1989)
[6] DRIELS M R, PATHRE U S., Significance of Observation Strategy on the Design of Robot Calibration Experiments[J], Journal of Robotic Systems, 7, 2, pp. 197-223, (1990)
[7] NAHVI A, HOLLERBACH J M, HAYWARD V., Calibration of a Parallel Robot Using Multiple Kinematic Closed Loops, Proceedings of the 1994 IEEE International Conference on Robotics and Automation, pp. 407-412, (1994)
[8] SUN Yu, HOLLERBACH J M., Observability Index Selection for Robot Calibration[C], 2008 IEEE International Conference on Robotics and Automation, pp. 831-836, (2008)
[9] Zhongyan LYU, WEN Xiulan, Weixiang CUI, Et al., Optimization of Pose Set for Kinematic Parameter Calibration of Industrial Robot[J], Instrument Technique and Sensor, 2021, 7, pp. 97-102
[10] WEN Xiulan, SONG Aiguo, FENG Yuegui, Et al., Robot Calibration and Uncertainty Evaluation Based on Optimal Pose Set[J], Chinese Journal of Scientific Instrument, 43, 9, pp. 276-283, (2022)

← 1 2 →