Finite Element Modeling and Artificial Neural Network Analyses on the Flexural Capacity of Concrete T-Beams Reinforced with Prestressed Carbon Fiber Reinforced Polymer Strands and Non-Prestressed Steel Rebars

被引:0
|
作者
Wang, Hai-Tao [1 ]
Liu, Xian-Jie [1 ]
Bai, Jie [2 ]
Yang, Yan [2 ]
Xu, Guo-Wen [2 ]
Chen, Min-Sheng [1 ]
机构
[1] Hohai Univ, Coll Civil & Transportat Engn, Nanjing 210098, Peoples R China
[2] China Construct Eighth Engn Div Co Ltd, Shanghai Engn Res Ctr CFRP Applicat Technol Civil, Shanghai 200122, Peoples R China
基金
中国国家自然科学基金;
关键词
prestressed concrete beams; CFRP strands; flexural behavior; finite element modeling; artificial neural network; RC BEAMS; BEHAVIOR; TENDONS; BOND;
D O I
10.3390/buildings14113592
中图分类号
TU [建筑科学];
学科分类号
0813 ;
摘要
The use of carbon fiber reinforced polymer (CFRP) strands as prestressed reinforcement in prestressed concrete (PC) structures offers an effective solution to the corrosion issues associated with prestressed steel strands. In this study, the flexural behavior of PC beams reinforced with prestressed CFRP strands and non-prestressed steel rebars was investigated using finite element modeling (FEM) and artificial neural network (ANN) methods. First, three-dimensional nonlinear FE models were developed. The FE results indicated that the predicted failure mode, load-deflection curve, and ultimate load agreed well with the previous test results. Variations in prestress level, concrete strength, and steel reinforcement ratio shifted the failure mode from concrete crushing to CFRP strand fracture. While the ultimate load generally increased with a higher prestressed level, an excessively high prestress level reduced the ultimate load due to premature fracture of CFRP strands. An increase in concrete strength and steel reinforcement ratio also contributed to a rise in the ultimate load. Subsequently, the verified FE models were utilized to create a database for training the back propagation ANN (BP-ANN) model. The ultimate moments of the experimental specimens were predicted using the trained model. The results showed the correlation coefficients for both the training and test datasets were approximately 0.99, and the maximum error between the predicted and test ultimate moments was around 8%, demonstrating that the BP-ANN method is an effective tool for accurately predicting the ultimate capacity of this type of PC beam.
引用
收藏
页数:19
相关论文
共 41 条
  • [21] Test on flexural behavior of steel-concrete composite beams strengthened with prestressed carbon fiber-reinforced polymer plates
    Wan S.
    Huang Q.
    Guan J.
    Harbin Gongye Daxue Xuebao/Journal of Harbin Institute of Technology, 2019, 51 (03): : 80 - 87
  • [22] Carbon fiber reinforced polymer (CFRP) laminates: flexural strengthening method for prestressed concrete beams with anchorage loss
    Gebre, Abrham
    Gedu, Maraki
    Gebre, Yisihak
    FUNCTIONAL COMPOSITES AND STRUCTURES, 2024, 6 (04):
  • [23] Flexural Behavior of Full-Scale, Carbon-Fiber-Reinforced Polymer Prestressed Concrete Beams Authors' response
    Belarbi, Abdeldjelil
    PCI JOURNAL, 2023, 68 (01): : 104 - 104
  • [24] Finite Element Modeling of Carbon Fiber-Reinforced Polymer Reinforced Concrete Beams under Elevated Temperatures
    Rafi, Muhammad Masood
    Nadjai, Ali
    Ali, Faris
    ACI STRUCTURAL JOURNAL, 2008, 105 (06) : 701 - 710
  • [25] Nonlinear Finite-Element Modeling of Concrete Bridge Girders Prestressed with Carbon Fiber-Reinforced Polymers
    Zheng, Bo-Tong
    Gencturk, Bora
    Belarbi, Abdeldjelil
    Poudel, Prakash
    JOURNAL OF BRIDGE ENGINEERING, 2024, 29 (08)
  • [26] Shear capacity assessment of steel fiber reinforced concrete beams using artificial neural network
    Sharifi, Yasser
    Moghbeli, Adel
    INNOVATIVE INFRASTRUCTURE SOLUTIONS, 2021, 6 (02)
  • [27] Shear capacity assessment of steel fiber reinforced concrete beams using artificial neural network
    Yasser Sharifi
    Adel Moghbeli
    Innovative Infrastructure Solutions, 2021, 6
  • [28] Finite element modeling of debonding mechanisms in carbon fiber reinforced polymer-strengthened reinforced concrete continuous beams
    Sakr, Mohammed A.
    STRUCTURAL CONCRETE, 2018, 19 (04) : 1002 - 1012
  • [29] Flexural behavior of reinforced concrete beams strengthened with gradually prestressed near surface mounted carbon fiber-reinforced polymer strips under static and fatigue loading
    Gong, Shuang
    Su, Miao
    Zhang, Jianren
    Peng, Hui
    ADVANCES IN STRUCTURAL ENGINEERING, 2024, 27 (07) : 1234 - 1250
  • [30] Flexural strengthening of reinforced concrete T-beams using a composite of prestressed steel wire ropes embedded in polyurethane cement (PSWR-PUC): Theoretical analysis
    Zhang, Kexin
    Shen, Xinyuan
    Liu, Jicheng
    Teng, Fei
    Zhang, Guanhua
    Wang, Jiawei
    STRUCTURES, 2022, 44 : 1278 - 1287