Parameter Identification Method for Agricultural Tire Flexible Ring Model Based on Particle Swarm Optimization Algorithm

被引：0
|
作者：
Sun R. [1 ,2 ]
Wang Y. [1 ,2 ]
Li Y. [3 ]
He Z. [1 ,2 ]
Zhu Z. [1 ,2 ]
Li Z. [1 ,2 ]
机构：
[1] College of Engineering, China Agricultural University, Beijing
[2] State Key Laboratory of Intelligent Agricultural Power Equipment, Beijing
[3] Technology Center, Cui Zhou Tyre Co., Ltd., Guiyang
来源：
Nongye Jixie Xuebao/Transactions of the Chinese Society for Agricultural Machinery | 2024年 / 55卷 / 04期
关键词：
agricultural tire; flexible ring model; genetic algorithm; modal testing; parameter identification; particle swarm optimization algorithm;
D O I：
10.6041/j.issn.1000-1298.2024.04.040
中图分类号：
学科分类号：
摘要：
The tire flexible ring model can accurately express tire deformation, but the stiffness parameters of the model cannot be directly measured, so identifying the stiffness parameters of the model becomes the key in the modeling process. Based on the kinematic equation of the tire flexible ring model, the relationship between the natural frequency and stiffness parameters of agricultural tires was analyzed, and a method for identifying the stiffness parameters of the flexible ring model was proposed based on particle swarm optimization (PSO) algorithm. Based on the kinematics equation of the flexible ring model tire, the relationship between the natural frequency and the stiffness parameters of the agricultural tire was analyzed, and a method for identifying the stiffness parameter of agricultural tire flexible ring model based on PSO algorithm was proposed. A tire testing platform was built, the natural frequency was obtained through tire modal testing, and PSO algorithm was used to identify the stiffness parameters of the flexible ring model. Using the average error between the experimental and predicted values of the natural frequency as the evaluation index, the identification results of PSO algorithm were compared with traditional methods and genetic algorithm (GA) . The results showed that PSO algorithm had the highest accuracy, with an average absolute error of 1. 67 Hz and an average relative error of 1. 66% . Compared with GA, the average relative error was decreased by 16. 16% and the computation time was decreased by 93. 19% . The correctness and accuracy of the stiffness parameter identification method was proved based on PSO algorithm. The grounding angle of agricultural tires was obtained through the contact patch test, and the vertical force on the tires was estimated based on the identified stiffness parameters. The experimental and predicted values of vertical force were compared, and the results showed that the parameter identification results obtained by the particle swarm algorithm had the highest accuracy. The average relative error of vertical load estimation was 1. 97%, which was reduced by 12. 05% compared with the genetic algorithm. © 2024 Chinese Society of Agricultural Machinery. All rights reserved.
引用
收藏
页码：402 / 410
页数：8
相关论文
共 27 条
  • [21] ALAGAPPAN A V, RAO K V N, KUMAR R K., A comparison of various algorithms to extract magic formula tyre model coefficients for vehicle dynamics simulations, Vehicle System Dynamics, 53, 2, pp. 154-178, (2015)
  • [22] TAN Guojin, KONG Qingwen, HE Xin, Et al., Bridge scour depth identification based on dynamic characteristics and improved particle swarm optimization algorithm [J], Journal of Jilin University (Engineering and Technology Edition), 53, 6, pp. 1592-1600, (2023)
  • [23] AGRAWAL R K, KAUR B, AGARWAL P., Quantum inspired particle swarm optimization with guided exploration for function optimization, Applied Soft Computing, 102, (2021)
  • [24] TANG Kexin, LIANG Xiaolei, ZHOU Wenfeng, Et al., Dynamic multi-population particle swarm optimization algorithm with recombined learning and hybrid mutation [J], Control and Decision, 36, 12, pp. 2871-2880, (2021)
  • [25] JIANG J J, WEI W X, SHAO W L, Et al., Research on large-scale bi-level particle swarm optimization algorithm, IEEE Access, 9, pp. 56364-56375, (2021)
  • [26] LIU Zhihao, LIU Yixun, ZHANG Ya, Et al., Modeling and tests of in-plane flexible ring vibration of heavy-duty tire, Journal of Vibration and Shock, 40, 23, pp. 134-142, (2021)
  • [27] HUANG Tong, LIU Zhihao, GAO Qinhe, Et al., Parameter identification and sensitivity analysis of heavy-duty vehicle tire model[J], Journal of Hunan University (Natural Sciences), 49, 8, pp. 36-44, (2022)
123