Effect of C/CO2 molar ratio on CO2 atmosphere fluidized preheating activation characteristics of semi-char

被引：0

作者：

Zhang H. ^{[1
,2
]}

Hu H. ^{[1
,2
]}

Zhu Z. ^{[1
,2
]}

Zheng S. ^{[1
,2
]}

Qi X. ^{[1
,2
]}

机构：

[1] Institute of Engineering Thermophysics, Chinese Academy of Sciences, Beijing

[2] University of Chinese Academy of Sciences, Beijing

来源：

Meitan Xuebao/Journal of the China Coal Society | 2024年 / 49卷 / 04期

关键词：

CO[!sub]2[!/sub; fluidization; preheating activation; reactivity; semi-char;

D O I：

10.13225/j.cnki.jccs.2023.0864

中图分类号：

学科分类号：

摘要：

There are many fields involved in China’s industry, and the carbon reduction is urgent. Oxy-fuel combustion is the core process of carbon capture in combustion. Coupling fluidized preheating activation with industrial kilns oxy-fuel combustion is a new way to expand fuel adaptability and achieve carbon capture during combustion. This study uses a small-scale fluidized bed continuous feeding experimental platform to investigate the effect of C/CO2 molar ratio (CC ratio) on the fluidized preheating activation characteristics of raw semi-char (RC) by adjusting the feeding rate at a temperature of 1 050 ℃ and CO2 fluidized rate of 0.17 m/s. The gas composition and low calorific value are analyzed, and the CO2 reduction ratio is calculated. The specific surface area, pore structure and carbon frame structure of fine particle activated semi-char (FC) and large particle activated semi-char (LC) are characterized. The reactivity of RC and FC is evaluated using a high-temperature tubular furnace thermobalance at 1 300 ℃. The results show that the use of fluidized preheating activation technology has achieved the resource utilization of CO2 and produced rich-CO fuel gas. When the CC ratio increases from 1 to 4, the CO+H2 volume fraction in the gas increases from 69.24% to 79.08%, and the highest CO volume fraction of 68.96%, the CO2 volume fraction decreases from 29.48% to 20.13%, and the CO2 reduction rate increases from 50.37% to 57.56%. The low calorific value of fuel gas increases from 8.69 MJ/m3 to 9.83 MJ/m3, which is 1.55−1.88 times higher than the low calorific value of the fuel gas produced by the project as described in the reference. The produced fuel gas in this study is conducive to the ignition and stable combustion of the kiln system. As the CC ratio increases, the specific surface area of FC and LC first increases and then decreases. The highest specific surface areas of FC and LC are 291.21 m2/g and 477.15 m2/g, respectively, which are 48 and 78 times higher than the RC. FC and LC have rich microporous structures, and the degree of graphitization decreases while the active sites increase. The microporous area accounts for 54.93%−68.42% of the specific surface area. In comparison, LC has a higher specific surface area and incremental pore volume mainly due to its longer residence time in the reactor, which promotes the development of pores and forms a large number of micropores. The reactivity index R0.5 and the average mass reaction rate of FC obtained under different CC ratios are higher than the RC, which reveals the good reaction characteristics of FC. It can be predicted that FC will achieve an efficient conversion during the high-temperature gas-solid activated thermal fuel combustion process. This research proposes a new route of fluidized oxy-fuel preheating activation for carbon-based fuels coupled with oxy-fuel combustion of gas-solid activated fuel with high-temperature. The influence of CC ratio on the characteristics of semi-char at CO2 atmosphere with fluidized preheating activation technology is obtained. The positive role of CO2 as a carbon and oxygen carrier is revealed. The research results provide a data support for the application of fluidized preheating activation technology in the industrial kiln oxy-fuel combustion industry. © 2024 China Coal Society. All rights reserved.

引用

页码：2067 / 2075

页数：8

共 25 条

[11] LIANG Chen, ZHANG Haixia, ZHU Zhiping, Et al., CO2-O2 gasification of a bituminous coal in circulating fluidized bed[J], Fuel, 200, (2017)
[12] LIU Yuhua, LIU Jingzhang, LU Qinggang, Et al., Microstructure analysis of fluidized preheating pulverized coal under O2/CO2 atmospheres[J], Fuel, 292, pp. 168-179, (2021)
[13] ZHU Ruixin, LUO Zhongyang, WANG Qinhui, Et al., Effect of activation and pyrolysis atmosphere on properties of semi-coke based activated carbon[J], Energy Engineering, 43, 4, (2023)
[14] WANG Mingyue, ZHOU Li, Mechanism of covalent bond depolymerization of coal activated at medium temperature, Journal of Engineering Thermophysics, 42, 1, pp. 129-138, (2021)
[15] KORUS Agnieszka, GUTIERREZ Juan-Pablo, SZLEK Andrzej, Et al., Pore development during CO2 and H2O activation associated with the catalytic role of inherent inorganics in sewage sludge char and its performance during the reforming of volatiles[J], Chemical Engineering Journal, 446, 3, (2022)
[16] LIGERO Ana, CALERO Monica, MARTIN -LARA M Angeles, Et al., Fixed-bed CO2 adsorption onto activated char from the pyrolysis of a non-recyclable plastic mixture from real urban residues[J], Utilization, 73, pp. 2212-2220, (2023)
[17] HU Hui, ZHANG Haixia, ZHU Zhiping, Effect of temperature on non-catalytic reduction of CO2 in semi-coke[J], Journal of China Coal Society, 48, S2, pp. 748-756, (2023)
[18] SADHWANI Narendra, ADHIKARI Sushil, EDEN Mario R., Biomass gasification using carbon dioxide： effect of temperature, CO2/C ratio, and the study of reactions influencing the process[J], Industrial & Engineering Chemistry Research, 55, 10, (2016)
[19] SHAHABUDDIN M, KIBRIA M A, Sankar BHATTACHARYA, Evaluation of high-temperature pyrolysis and CO2 gasification performance of bituminous coal in an entrained flow gasifier[J], Journal of the Energy Institute, 94, pp. 294-309, (2021)
[20] LU Qinggang, YU Kuangshi, LIU Weiwei, Et al., Development and operation of large scale circulating fluidized bed coal gasification[C], Proceedings of the 12th International Conference on Fluidized Bed Technology, pp. 825-830, (2017)

← 1 2 3 →