Prediction of flow and dynamic recrystallization behavior based on three machine learning methods for a novel duplex-phase titanium alloy

被引:2
|
作者
Zhang, Shuai [1 ,2 ]
Zhang, Haoyu [1 ,2 ]
Wang, Chuan [1 ,3 ]
Zhou, Ge [1 ,2 ]
Cheng, Jun [4 ]
Zhang, Zhongshi [5 ]
Wang, Xiaohu [5 ]
Chen, Lijia [1 ,2 ]
机构
[1] Shenyang Univ Technol, Sch Mat Sci & Engn, Shenyang 110870, Liaoning, Peoples R China
[2] Shenyang Univ Technol, Shenyang Key Lab Adv Struct Mat & Applicat, Shenyang 110870, Liaoning, Peoples R China
[3] Liaoning Univ, Coll Light Ind, Shenyang 110036, Liaoning, Peoples R China
[4] Northwest Inst Nonferrous Met Res, Shaanxi Key Lab Biomed Met Mat, Xian 710016, Shaanxi, Peoples R China
[5] ZS Adv Mat Co Ltd, Donggang 118300, Liaoning, Peoples R China
基金
中国国家自然科学基金;
关键词
Duplex-phase titanium alloy; Hot deformation; Machine learning method; Processing map; Kinetic analysis; HOT DEFORMATION-BEHAVIOR; NEURAL-NETWORK; PROCESSING MAPS; SECONDARY ALPHA; HIGH-STRENGTH; EVOLUTION; WORKING; MICROSTRUCTURE; MECHANISMS; DUCTILITY;
D O I
10.1016/j.intermet.2024.108523
中图分类号
O64 [物理化学(理论化学)、化学物理学];
学科分类号
070304 ; 081704 ;
摘要
In this work, the vacuum arc-melting was used to prepare the Ti-10V-5Al-2.5Fe-0.1B alloy. Single-pass isothermal compression experiments were carried out on the alloy in the temperature range of 770-920 degrees C at strain rates of 0.0005-0.5 s-1.-1 . The BP model optimized by the bald eagle search algorithm (BES-BP), the BP model optimized by the sparrow search algorithm (SSA-BP), and the BP model optimized by the gray wolf optimization algorithm (GWO-BP) were developed for high-precision prediction of flow stress. The above models were compared by using the mean square correlation coefficient, root mean square error, and average absolute relative error between the predicted and experimental flow stress. The three prediction accuracy parameters have indicated that the BES-BP model has a higher accuracy for flow stress prediction at the known and the new process parameters. A hot processing map based on the dynamic materials model was developed by using the flow stress predicted in the framework of the BES-BP model, and EBSD analysis was performed as well. The results show that the degree of dynamic recrystallization increases with an increase in the power dissipation factor, and the formation of deformation bands is the main cause of instability. The minimum critical stress for inducing dynamic recrystallization of the alloy was found to be 13.13 MPa at 890 degrees C/0.0005 s-1.-1 . Moreover, the power dissipation factor increases with a decrease in critical stress. In addition, microstructure validation data reveal that the dynamic recrystallization model has a high accuracy for critical stress prediction, confirming that the critical stress increases with a decrease in the dynamic recrystallization fraction.
引用
收藏
页数:15
相关论文
共 50 条
  • [31] Data-driven fatigue life prediction in additive manufactured titanium alloy: A damage mechanics based machine learning framework
    Zhan, Zhixin
    Hu, Weiping
    Meng, Qingchun
    ENGINEERING FRACTURE MECHANICS, 2021, 252
  • [32] A comparison of classical and machine learning-based phenotype prediction methods on simulated data and three plant species
    John, Maura
    Haselbeck, Florian
    Dass, Rupashree
    Malisi, Christoph
    Ricca, Patrizia
    Dreischer, Christian
    Schultheiss, Sebastian J.
    Grimm, Dominik G.
    FRONTIERS IN PLANT SCIENCE, 2022, 13
  • [33] Flow behavior and dynamic recrystallization of a power metallurgy nickel-based superalloy during hot compression in (γ plus γ′)-phase region
    Sun, Bing
    Zhang, Tiebang
    Song, Lin
    JOURNAL OF ALLOYS AND COMPOUNDS, 2022, 891
  • [34] Airspace situation analysis of terminal area traffic flow prediction based on big data and machine learning methods
    Li, Yandong
    Jiang, Bo
    Liu, Weilong
    Li, Chenglong
    Zhou, Yunfan
    BIG DATA RESEARCH, 2024, 35
  • [35] Flow behavior and dynamic recrystallization mechanism of a new near-alpha titanium alloy Ti-0.3Mo-0.8Ni-2Al-1.5Zr
    Wang, Yongsheng
    Li, Zhengdao
    Wang, Hongyan
    Hou, Meiyu
    Yu, Kun
    Xu, Yaoping
    Xiao, Han
    JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2024, 30 : 3863 - 3876
  • [36] RETRACTED: Phase Prediction Study of High-Entropy Energy Alloy Generation Based on Machine Learning (Retracted Article)
    He, Zhongping
    Zhang, Huan
    COMPUTATIONAL INTELLIGENCE AND NEUROSCIENCE, 2022, 2022
  • [37] Dynamic study of coarse-grained behavior within 7075 aluminum alloy extruded rods based on machine learning
    Zheng, Jia
    Hu, Zhili
    Hua, Lin
    Sun, Qian
    MATERIALS CHARACTERIZATION, 2025, 222
  • [38] Prediction of maximum dynamic shear modulus of undisturbed marine soils in the eastern coast of China based on machine learning methods
    Tu, Yiliang
    Yao, Qianglong
    Zhou, Ying
    Zhu, Zhihua
    OCEAN ENGINEERING, 2025, 321
  • [39] Three-dimensional wake transition of rectangular cylinders and temporal prediction of flow patterns based on a machine learning algorithm
    Mashhadi, A.
    Sohankar, A.
    Moradmand, M. M.
    PHYSICS OF FLUIDS, 2024, 36 (09)
  • [40] Load Prediction Methods Using Machine Learning for Home Energy Management Systems Based on Human Behavior Patterns Recognition
    Fan, Longmao
    Li, Hailing
    Zhang, Xiao-Ping
    CSEE JOURNAL OF POWER AND ENERGY SYSTEMS, 2020, 6 (03): : 563 - 571