Microstructure and corrosion properties of CrMnFeCoNi high entropy alloy coating by temperature field-assisted laser cladding

The CrMnFeCoNi high entropy alloy coatings were prepared on the surface of Q345 steel using a temperature field-assisted laser cladding process, and the effects of the applied temperature field on the cladding coatings were studied. The microstructures and corrosion morphologies of the coatings were observed, and the elemental distribution, hardness, effective elastic modulus, electrochemical corrosion performance, and corrosion products of different coatings were analyzed. The results show that the porosity of the HEA coatings prepared with a temperature field is reduced to below 50 % of the initial level. The microstructure of the coating changed, with the nanoindentation hardness of the coating increasing by up to 0.55 GPa, enhancing the mechanical properties. Among all the coatings, the coating prepared at 250 degrees C temperature field exhibited the best corrosion resistance, with corrosion potential and current density of -0.27 V and 0.15 mu A/cm2, respectively, improving the corrosion potential by 0.1 V and reducing the current density by 1.08 mu A/cm2 compared to the sample prepared at room temperature. After incorporating the temperature field, the stability of the passive film on the coating during corrosion improved, and the nucleation rate of pitting decreased. Therefore, incorporating an appropriate temperature field during laser cladding can effectively enhance the overall performance of the CrMnFeCoNi HEA coating.