Indentation and puncture response characteristics of flax fibre-reinforced polymer pipes

被引：0

作者：

Department of Civil and Environmental Engineering, The University of Auckland, New Zealand ^{[1
]}

不详 ^{[2
]}

机构：

来源：

关键词：

Conical nose - Fiber-reinforced polymers - Fibre reinforced polymers - Flax fibres - Impact behavior - Indenters - Length to diameter ratio - Polymer pipes - Response characteristic - Tube;

D O I：

暂无

中图分类号：

学科分类号：

摘要：

Flax fibre-reinforced polymer (FFRP) was utilised to manufacture ninety-nine pipes having variations in thickness and diameter, with all pipes having a constant length-to-diameter ratio of 6:1. Indentation and puncture experiments were performed on the FFRP pipes using conical nose, hemispherical nose, and wedge nose indenters to establish the effect of diameter, thickness, and indenter nose shape on the stiffness, puncture load, deformation, and failure mechanism of the pipes. FFRP pipes showed comparable stiffness and puncture load but a smaller area of pipe damage when compared to glass fibre-reinforced polymer pipes. The experimental results obtained were compared to the analytical expressions available in the literature for steel pipes subjected to puncture load, and close correlation was found between the experimental and predicted results. © 2022 Elsevier Ltd

引用

共 50 条

[21] Seismic and dynamic response characteristics of flax fiber-reinforced epoxy pipes
Firouzsalari, Saeed Eyvazinejad
Dizhur, Dmytro
Jayaraman, Krishnan
Ingham, Jason
COMPOSITES PART B-ENGINEERING, 2024, 279
[22] Fibre-reinforced polymer in railway civil engineering
Bell, B.
PROCEEDINGS OF THE INSTITUTION OF CIVIL ENGINEERS-ENGINEERING AND COMPUTATIONAL MECHANICS, 2009, 162 (03) : 119 - 126
[23] Design of a Replacement Fibre-reinforced Polymer Footbridge
Nuti, Enrico
Fleischmann-Allen, Sam
Chambers, Mark
10TH INTERNATIONAL CONFERENCE ON FRP COMPOSITES IN CIVIL ENGINEERING (CICE 2020/2021), 2022, 198 : 646 - 656
[24] Manufacturing flax fibre-reinforced polypropylene composites by hot-pressing
Jolly, Marc
Jayaraman, Krishnan
INTERNATIONAL JOURNAL OF MODERN PHYSICS B, 2006, 20 (25-27): : 4601 - 4606
[25] Variability of flax fibre morphology and mechanical properties in injection moulded short straw flax fibre-reinforced PP composites
Soete, Karen
Desplentere, Frederik
Lomov, Stepan V.
Vandepitte, Dirk
JOURNAL OF COMPOSITE MATERIALS, 2017, 51 (23) : 3337 - 3349
[26] IMPACT RESISTANCE OF FLAX FIBRE REINFORCED POLYMER COMPOSITE
Wang, Wenjie
Chouw, Nawawi
PROCEEDINGS OF THE THIRTEENTH INTERNATIONAL SYMPOSIUM ON STRUCTURAL ENGINEERING, VOLS 1 AND II, 2014, : 42 - 47
[27] Long-term tensile properties of natural fibre-reinforced polymer composites: Comparison of flax and glass fibres
Hristozov, Dimo
Wroblewski, Laura
Sadeghian, Pedram
COMPOSITES PART B-ENGINEERING, 2016, 95 : 82 - 95
[28] On the Response to Hygrothermal Ageing of Fully Recyclable Flax and Glass Fibre Reinforced Polymer Composites
Das, Subrata Chandra
Srivastava, Chaman
Goutianos, Stergios
La Rosa, Angela Daniela
Grammatikos, Sotirios
MATERIALS, 2023, 16 (17)
[29] Shock response of unidirectional carbon fibre-reinforced polymer composites: Influence of fibre orientation and volume fraction
Shah, Suman
Hazell, Paul J.
Wang, Hongxu
Escobedo, Juan P.
COMPOSITES PART B-ENGINEERING, 2025, 299
[30] Experimental study of the indentation of sandwich panels with carbon fibre-reinforced polymer face sheets and polymeric foam core
Flores-Johnson, E. A.
Li, Q. M.
COMPOSITES PART B-ENGINEERING, 2011, 42 (05) : 1212 - 1219

← 1 2 3 4 5 →