Experiment on combustion characteristics of U⁃bend pulse detonation combustor under high temperature inlet stream

被引：0
|
作者：
Tan W. [1 ]
Zheng L. [1 ]
Lu J. [1 ]
Wang L. [1 ]
Huang K. [2 ]
机构：
[1] School of Power and Energy, Northwestern Polytechnical University, Xi'an
[2] Aerospace Technology Institute, China Aerodynamics Research and Development Center, Mianyang
来源：
Hangkong Dongli Xuebao/Journal of Aerospace Power | 2022年 / 37卷 / 03期
关键词：
DDT (deflagration to detonation transition) distance; High temperature inlet stream; Ignition and detonation time; Pulse detonation; U⁃bend pulse detonation combustor;
D O I：
10.13224/j.cnki.jasp.20210159
中图分类号：
学科分类号：
摘要：
In order to obtain the combustion characteristics of gas⁃liquid two⁃phase multi⁃cycle U⁃bend pulse detonation combustor (U⁃PDC) under high temperature inlet stream, experimental research was carried out by using gasoline and air as fuel and oxidant.The results indicated that the U⁃PDC can achieve stable operation at the working frequency of 15-38 Hz when the inlet temperature was 373 K, and the deflagration to detonation transition (DDT) distance was shortened when the working frequency increased.When the working frequency was 15-25 Hz, the detonation initiation failed at room temperature.The results showed that high temperature inflow can promote the DDT process.At room temperature and working frequency of 15-25 Hz, due to the uneven distribution of combustible gas in the U⁃bend detonation tube, the time when the flame was detected outside of the U⁃bend detonation tube was later than the exit of the U⁃bend detonation tube.When the inflow temperature increased to 373 K, the phenomenon was obviously improved.In addition, the ignition time of U‑PDC was within 3-10 ms, which was greatly affected by ignition delay time.When the working frequency of U⁃PDC was the same and the inlet stream temperature raised from room temperature to 373 K, the wave velocity increased, and the ignition time decreased. © 2022, Editorial Department of Journal of Aerospace Power. All right reserved.
引用
收藏
页码：502 / 510
页数：8
相关论文
共 26 条
  • [11] FROLOV S M, AKSENOV V S, SHAMSHIN I O., Shock wave and detonation propagation through U⁃bend tubes, Proceedings of the Combustion Institute, 31, 2, (2007)
  • [12] FROLOV S M, AKSENOV V S, SHAMSHIN I O., Initiation of gaseous detonation in tubes with sharp U⁃bends, Doklady Physical Chemistry, 418, 5, (2008)
  • [13] FROLOV S M, AKSENOV V S, SHAMSHIN I O., Reactive shock and detonation propagation in U⁃bend tubes, Journal of Prevention in the Process Industries, 20, (2007)
  • [14] FROLOV S M, AKSENOV V S, SHAMSHIN I O., Propagation of shock and detonation waves in channels with U⁃shaped bends of limiting curvature, Combustion and Explosion, 2, 5, (2008)
  • [15] SHINOBU O, MASAYA S, MAKOTO Y., Numerical Investigation on detonation wave through U⁃bend, Journal of Thermal Science, 19, 6, (2010)
  • [16] QIU Hua, SU Zheng, XIONG Cha, Experimental investigation on multi⁃cycle two⁃phase spiral pulse detonation tube of two configurations, Journal of Aerospace Engineering, 233, 11, pp. 1-10, (2018)
  • [17] BROPHY C M, NETZER D W, SINIBALDI J, Et al., Operation of a JP10/air pulse detonation engine, the 36th AlAA/ASME/SAE/ASEE Joint Propulsion Conference, (2000)
  • [18] CICCARELLI G, GINSBERG T, BOCCIO J, Et al., Detonation cell size measurements and predictions in hydrogen⁃air⁃steam mixtures at elevated temperatures, Combustion and Flame, 99, 2, (1994)
  • [19] CICCARELLI G., Flame acceleration in fuel⁃air mixtures at elevated initial temperatures, the 38th AIAA/ASME/SAE/ASEE Joint Propulsion Conference, (2002)
  • [20] CARD J, CICCARELLI G., DDT in fuel⁃air mixtures at elevated temperatures and pressures, Shock Waves, 14, 3, (2005)
123