Practical Calculation Method for Fault Steady-state Current in Inverter-interfaced Generator Stations

被引：0

作者：

Tang Y. ^{[1
,2
]}

Song G. ^{[2
]}

Hao Z. ^{[1
]}

Jiang J. ^{[2
]}

Chang N. ^{[2
]}

Lang X. ^{[1
]}

机构：

[1] School of Electric Engineering, Guizhou University, Guiyang

[2] School of Electric Engineering, Xi’an Jiaotong University, Xi’an

来源：

Dianli Xitong Zidonghua/Automation of Electric Power Systems | 2024年 / 48卷 / 10期

关键词：

error analysis; fault current; inverter-interfaced generator; short-circuit current; single-unit multiplication;

D O I：

10.7500/AEPS20230327002

中图分类号：

学科分类号：

摘要：

The single-unit multiplication method is commonly used for fault steady-state modeling of inverter-interfaced generator stations to simply estimate the short-circuit current level. But its calculation accuracy needs to be improved. First, the decisive effect of active power output and voltage dips on the steady-state current output of the power generation unit under the constraints of the low voltage ride-through control strategy is analyzed in this paper. Then, the output characteristic curve of the fault steady-state current is derived. Based on this, the effects of the differences in electrical distance and active power output of the station on the calculation error of single-unit multiplication method are analyzed. On the basis of error analysis, an improved single-unit multiplication method considering the distribution characteristics of power generation units is proposed. The method uses the equivalent impedance to equate the electrical distance between the power generation unit and point of common coupling in the calculation of the voltage at the access point of the power generation unit. The station grouping is equated into two units for reducing the impact of the difference in active power output between the power generation units on the short-circuit characteristics. Simulation analysis in different scenarios shows that the improved method has a large improvement in the calculation accuracy compared with single-unit multiplication method. The method proposed has good engineering practicality as it can achieve station grouping and short-circuit current aggregation with simple calculations. © 2024 Automation of Electric Power Systems Press. All rights reserved.

引用

页码：182 / 191

页数：9

共 24 条

[1] SONG Guobing, TAO Ran, Bin LI, Et al., Survey of fault analysis and protection for power system with large scale power electronic equipments ［J］, Automation of Electric Power Systems, 41, 12, pp. 2-12, (2017)
[2] Tianshu BI, Bin YANG, Ke JIA, Et al., Review on renewable energy source fault characteristics analysis［J］, CSEE Journal of Power and Energy Systems, 8, 4, pp. 963-972, (2022)
[3] KONG Xiangping, ZHANG Zhe, YIN Xianggen, Et al., Study on fault current characteristics and fault analysis method of power grid with inverter interfaced distributed generation ［J］, Proceedings of the CSEE, 33, 34, pp. 65-74, (2013)
[4] PAN Guoqing, ZENG Dehui, WANG Gang, Et al., Fault analysis on distribution network with inverter interfaced distributed generations based on PQ control strategy ［J］, Proceedings of the CSEE, 34, 4, pp. 555-561, (2014)
[5] SHUAI Z K, YIN X, Et al., Fault analysis of inverter-interfaced distributed generators with different control schemes ［J］, IEEE Transactions on Power Delivery, 33, 3, pp. 1223-1235, (2018)
[6] WANG Q G, ZHOU N C，, YE L., Fault analysis for distribution networks with current-controlled three-phase inverter-interfaced distributed generators ［J］, IEEE Transactions on Power Delivery, 30, 3, pp. 1532-1542, (2015)
[7] HONG Shubin, FAN Chunju, CHEN Shi, Et al., Research on fault equivalence method for multiple inverter-interfaced distributed generation based on PQ control strategy［J］, Power System Technology, 42, 4, pp. 1101-1109, (2018)
[8] YANG Shan, TONG Xiangqian, Short-circuit current calculation of distribution network containing distributed generators with capability of low voltage ride through［J］, Automation of Electric Power Systems, 40, 11, pp. 93-99, (2016)
[9] Short-circuit analysis of AC distribution systems dominated by voltage source converters considering converter limitations［J］, IEEE Transactions on Smart Grid, 13, 5, pp. 3867-3878, (2022)
[10] JIA Ke, HOU Laiyun, BI Tianshu, Et al., Practical engineering calculation of short-circuit current for renewable energy based on local iteration of fault area［J］, Automation of Electric Power Systems, 45, 13, pp. 151-158, (2021)

← 1 2 3 →