Research of scale effect on propeller bearing force of a four-screw ship in oblique flow

被引:0
|
作者
Sun, Shuai [1 ]
Qin, Taotao [1 ]
Li, Xiang [2 ]
机构
[1] Nanjing Univ Sci & Technol, Natl Key Lab Transient Phys, Nanjing 210094, Peoples R China
[2] Hainan Univ, Coll Civil Engn & Architecture, Haikou 570228, Hainan, Peoples R China
基金
中国国家自然科学基金;
关键词
NUMERICAL-ANALYSIS; EXCITING FORCE; NOMINAL WAKE; PERFORMANCE;
D O I
10.1063/5.0232044
中图分类号
O3 [力学];
学科分类号
08 ; 0801 ;
摘要
To study the scale effect on propeller bearing forces in oblique flow, the propeller bearing forces of a fully appended four-screw ship that refers to a vessel propelled by four propellers are calculated and investigated. The findings reveal that scale effects in wake fields lead to an increase in the axial velocity of the propeller disk in the full-scale ship compared to the model, influenced by boundary layer flow. Moreover, asymmetric differences in the impact of oblique flow on the leeward and windward sides result in varied effects of positive and negative drift angles on the wakefield. The disparity in wake fields between inside and outside disks exacerbates unbalanced load distribution, with time-averaged loads showing an increase with drift angle for both propellers at full scale. Additionally, pronounced scale effects lead to variations in blade loads between model and full scale, with drift angles shifting the locations of single-blade load extremums. Unsteady bearing force components exhibit periodic fluctuations, with larger amplitudes at the blade passage frequency for the model scale propeller compared to the full scale, particularly evident under negative drift angles. The aforementioned findings can provide theoretical guidance for load balancing and vibration reduction of the four-screw ships.
引用
收藏
页数:15
相关论文
共 50 条
  • [21] Research on Performance of Contra-rotating Propeller Operating in Oblique Flow
    Wang, Haotian
    Wu, Jiaming
    Zhou, Changke
    Ship Building of China, 2020, 61 : 358 - 371
  • [22] Research on the influence of ship propeller shaft deformation to stern journal bearing lubrication
    Zhu Hanhua
    Liu Zhenglin
    Yan Xinping
    Yan Guoping
    Proceedings of the International Conference on Mechanical Transmissions, Vols 1 and 2, 2006, : 1174 - 1177
  • [23] Biomechanical evaluation of two-level oblique lumbar interbody fusion combined with posterior four-screw fixation:A finite element analysis
    Ge, Ting
    Hu, Baiwen
    Zhang, Qiaolin
    Xiao, Jin
    Wu, Xiaochuan
    Xia, Dongdong
    CLINICAL NEUROLOGY AND NEUROSURGERY, 2023, 225
  • [25] The Effect of Wake Flow and Skew Angle on the Ship Propeller Performance
    Ghassemi, H.
    SCIENTIA IRANICA TRANSACTION B-MECHANICAL ENGINEERING, 2009, 16 (02): : 149 - 158
  • [26] Investigations of influence of screw propeller operation on water flow around stern part of ship hull
    Koronowicz, Tadeusz
    Krzemianowski, Zbigniew
    POLISH MARITIME RESEARCH, 2007, 14 (01) : 3 - 8
  • [27] Investigations of influence of screw propeller operation on water flow around stern part of ship hull
    Koronowicz, Tadeusz
    Krzernianowski, Zbigniew
    JOURNAL OF THE SOUTH AFRICAN INSTITUTION OF CIVIL ENGINEERING, 2008, 50 (01) : 3 - 8
  • [28] Numerical prediction analysis of propeller bearing force for full-scale hull-propeller-rudder system
    Wang, Chao
    Sun, Shuai
    Li, Liang
    Ye, Liyu
    INTERNATIONAL JOURNAL OF NAVAL ARCHITECTURE AND OCEAN ENGINEERING, 2016, 8 (06) : 589 - 601
  • [29] The Effect of the Fillets on Submarine Wake Field and Propeller Unsteady Bearing Force
    Li, Xiang
    Cai, Wenyu
    Ren, Nianxin
    Sun, Shuai
    JOURNAL OF MARINE SCIENCE AND ENGINEERING, 2023, 11 (04)
  • [30] Research on effection of phase difference to pressure fluctuations induced by propeller cavitation of twin-screw ship
    College of Naval Architecture and Power, Naval University of Engineering, Wuhan 430033, China
    Chuan Bo Li Xue, 2009, 2 (203-209):