Superior low temperature activity over α-MnO2/β-MnOOH catalyst for selective catalytic reduction of NOx with ammonia

Manganese octahedral molecular sieves with an alpha-MnO2 crystal structure (OMS-2) and their related materials have attracted significant attention for the selective catalytic reduction of NOx using NH3 (NH3-SCR) at low temperatures. Further lowering their operating temperature should be an effective method to develop an environmentally friendly de-NOx system; however, their catalytic activity at low temperatures, especially below 100 degrees C, remains poor. This study describes a post-synthetic approach to develop Mn-based catalysts superior to those in the literature that operate at ultralow temperatures. Post-synthetic planetary ball milling for OMS-2 caused the partial conversion of OMS-2 into beta-MnOOH. The obtained nanocomposite catalysts possessed abundant surface oxygen vacancies and strong surface acidity, allowing the milled catalyst to exhibit higher NO conversion at 90 degrees C (91%) than that in freshly prepared OMS-2 without planetary ball milling (29%). Lowering the operation temperature of OMS-2 catalysts contributed to the suppression of N2O evolution during NH3-SCR over manganese-based catalysts, resulting in high N2 selectivity over the milled OMS-2 catalyst (93%).