Characterizing the free-vibration response of a two-span rocking bridge with free-standing columns

For accelerated bridge construction (ABC), replacing traditional emulative connections of precast elements with simpler discontinuities may lead to more resilient structures with reduced expected damages after strong seismic events. This paper comprises novel free-vibration tests of a 1:10 scale two-span rocking bridge with free-standing columns with proper geometrical and dynamic similarity. The two spans induced in the model the interaction between frames with different tributary masses, as would be expected for a realistic bridge. To excite the bridge uniformly, the experimental protocol consisted of forty-nine incremental sinusoidal ground motions that were interrupted, letting the bridge vibrate freely to rest. The results were compared with six analytical models. The results showed that the structure remained undamaged for the free-vibration tests after drifts up to 6 % and did not wobble unrestricted. The results were used to obtain the dynamic properties of the system and their variation to displacement increments. Construction imperfections induced the model to rock for all excitations, including low-intensity excitations, and to vibrate with periods different from those of theoretical equations at low displacements. This behavior was critical in the comparison between experimental results and the estimates from analytical models. These findings demonstrate that rocking bridges are a suitable system to control structural damage during seismic events despite the apparent variability of the behavior under realistic conditions. However, the design of these structures must account for the effects of construction imperfections at the rocking surface. The experimental results are openly available for download in the DesignSafe Data Depot using this DOI https://doi.org/10.17603/ds2-znfv-8t55.