EFFECT OF ANTISOLVENT ON PERFORMANCE OF CsPbBr3 SOLAR CELLS

被引：0
|
作者：
Chen Y. [1 ]
Li F. [1 ]
机构：
[1] School of Science, Hubei University of Technology, Wuhan
来源：
Taiyangneng Xuebao/Acta Energiae Solaris Sinica | 2024年 / 45卷 / 04期
关键词：
antisolvent; CsPbBr3; defect; film preparation; perovskite solar cells; solar cell efficiency;
D O I：
10.19912/j.0254-0096.tynxb.2023-2169
中图分类号：
学科分类号：
摘要：
In this paper，a series of antisolvent ethyl acetate（EA）and acetonitrile（ACN）were added to the perovskite precursor to prepare CsPbBr3 thin films with different morphologies，and the effect of thin film quality on the performance of perovskite solar cells was studied. Research results show that in the atmosphere preparation environment，the antisolvent can promote the growth of CsPbBr3 grain，the surface defects of the film are significantly reduced，and the short circuit current density，open circuit voltage and filling factor of the prepared FTO/TiO2/CsPbBr3/Carbon structure solar cells are improved. In particular，when acetonitrile（V（PbBr2/DMF）∶ V（ACN）is 10∶1）was added，the solar cell photoelectric conversion efficiency（PCE）was increased from 3.16% to 7.10%. © 2024 Science Press. All rights reserved.
引用
收藏
页码：122 / 126
页数：4
相关论文
共 19 条
  • [11] WANG S B, SUN W H，, Et al., A green Bi-Solvent system for processing high-quality CsPbBr3 films in efficient all- inorganic perovskite solar cells［J］, Materials today physics, 22, (2022)
  • [12] DONG C, Et al., Anti-solvent assisted multi-step deposition for efficient and stable carbon-based CsPbI2Br all-inorganic perovskite solar cell［J］, Nano energy, 59, pp. 553-559, (2019)
  • [13] HAN B Q，, ZHANG L, Et al., Antisolvent engineering on low- temperature processed CsPbI3 inorganic perovskites for improved performances of solar cells［J］, Nanotechnology, 32, 18, (2021)
  • [14] ZHANG W N, LI Z Y，, WEI W，, Et al., Effect of green mixed antisolvent on morphology of perovskite thin films ［J］, Modern chemical industry, 43, S2, pp. 238-242, (2023)
  • [15] ZHANG Q Q，, Et al., Eco-friendly solvent engineered CsPbI2.77Br0.23 ink for large-area and scalable high performance perovskite solar cells［J］, Advanced materials, 2023
  • [16] LI Y，, ZHU J，, ZHANG X H, Et al., Investigation on morphology-photovoltaic property correlation in perovskite solar cells［J］, Acta energiae solaris sinica, 40, 9, pp. 2630-2635, (2019)
  • [17] ZHOU S H, ZHANG W F, JIANG Y T，, Et al., Heating and water treatment jointly control morphology of PbI2 thin film and its application in perovskite solar cells［J］, Acta energiae solaris sinica, 43, 9, pp. 78-82, (2022)
  • [18] Small grains as recombination hot spots in perovskite solar cells ［J］, Matter, 4, 5, pp. 1683-1701, (2021)
  • [19] XIANG Z W, YAN J J，, Et al., Enhancing performance and stability of CsPbBr3 perovskite solar cells through environmentally friendly binary solvent fabrication ［J］, Journal of materials science：materials in electronics, 34, 31, (2023)
12