Electrochemical and Chemical Reactivities of Titanium Oxide-Based Materials with a Chloroaluminate Ionic Liquid Electrolyte for Aluminum Batteries

被引:1
|
作者
Sorriaux, Maxime [1 ,2 ]
Kang, Seongkoo [1 ,2 ]
Reeves, Kyle G. [1 ,2 ]
Porras Gutierrez, Ana Gabriela [1 ,2 ]
Leclerc, Sandrine [1 ,2 ]
Sarou-Kanian, Vincent [3 ]
Fayon, Franck [3 ]
Legein, Christophe [4 ]
Body, Monique [4 ]
Gouadec, Gwenael [5 ]
Borkiewicz, Olaf J. [6 ]
Dambournet, Damien [1 ,2 ]
机构
[1] Sorbonne Univ, CNRS, Physicochimie Electrolytes & Nanosyst Interf, UMR 8234, F-75005 Paris, France
[2] Reseau Stockage Electrochim Energie, F-80039 Amiens, France
[3] CNRS, CEMHTI, UPR3079, F-45071 Orleans, France
[4] Le Mans Univ, Inst Mol & Mat Mans, UMR CNRS 6283, F-72085 Le Mans, France
[5] Sorbonne Univ, CNRS, MONARIS, Mol Nanoobjets Reactivite Interact & Spect,UMR 823, F-75005 Paris, France
[6] Argonne Natl Lab, Adv Photon Source, Xray Sci Div, Argonne, IL 60439 USA
来源
ACS APPLIED ENERGY MATERIALS | 2024年 / 7卷 / 21期
关键词
Al3+-ion insertion chemistry; defects; anionic environnements; dissolution; shuttleeffect; AL3+ STORAGE MECHANISM; ANATASE TIO2; CHLORIDE BATTERIES; MOLTEN-SALT; AL-27; NMR; INTERCALATION; CATHODE; INSERTION; SPECTRA; ANODE;
D O I
10.1021/acsaem.4c01840
中图分类号
O64 [物理化学(理论化学)、化学物理学];
学科分类号
070304 ; 081704 ;
摘要
By selecting three different types of electrode materials, we intended to better understand the Al3+ intercalation chemistry of titanium oxide-based frameworks with an acidic chloroaluminate electrolyte. In agreement with previous reports, we confirmed that the native interstitial sites of anatase TiO2 are less prone to accommodate Al3+ than Li+ or Na+ ions, while introducing cationic vacancies largely increases the electrochemical storage capacity. Upon the first cycle, the highest reversible capacity, up to 277 mAh/g, was obtained for a hydrated layered structure featuring cationic vacancies. Total scattering data showed that the insertion of Al3+ ions induced a strong distortion of the framework. In addition, combined 27Al MAS NMR and DFT calculations revealed that in oxy-hydroxylated vacant sites, the coordination mode of Al3+ ions depends on the arrangement of anions around vacancies inducing the occurrence of 4-, 5-, and 6-fold coordination modes. Further cycling experiments revealed a progressive capacity fading for all electrode materials. Using cyclic voltammetry on the used electrolyte, we evidenced that a partial dissolution has occurred, which is more pronounced for the layered hydrate compound, and that solubilized species are electrochemically active, giving rise to specific signatures in both CVs and galvanostatic experiments. Raman spectroscopy enabled us to characterize these species, which are derived from the Ti-Cl system. The solubilized species, however, eventually precipitated, as shown by a purple deposit observed on the separator and tentatively assigned to TiCl3, known to be insoluble in this medium. By providing further information on the Al3+ intercalation chemistry and a better understanding of the electrochemical and chemical reactivities of electrode materials, this work will enable progress to be made in the development of aluminum-ion batteries.
引用
收藏
页码:9852 / 9862
页数:11
相关论文
共 50 条
  • [21] Manganese oxide-based materials as electrochemical supercapacitor electrodes
    Wei, Weifeng
    Cui, Xinwei
    Chen, Weixing
    Ivey, Douglas G.
    CHEMICAL SOCIETY REVIEWS, 2011, 40 (03) : 1697 - 1721
  • [22] Electrochemistry and Morphology Studies of Aluminum Plating/Stripping in a Chloroaluminate Ionic Liquid on Porous Carbon Materials
    Zhang, Mengqi
    Watson, Jack S.
    Counce, Robert M.
    Trulove, Paul C.
    Zawodzinski, Thomas A., Jr.
    JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 2014, 161 (04) : D163 - D167
  • [23] The Role of Ionic Liquid Electrolyte in an Aluminum-Graphite Electrochemical Cell
    Agiorgousis, Michael L.
    Sun, Yi-Yang
    Zhang, Shengbai
    ACS ENERGY LETTERS, 2017, 2 (03): : 689 - 693
  • [24] Ion Conducting Polyethylene Oxide-Based Polymer Electrolyte Dopped with Ionic Liquid-Trifluoromethanesulfonic Chloride
    Jahangir A.
    Singh P.K.
    Singh R.C.
    Punetha V.D.
    Rawat S.
    Macromolecular Symposia, 2024, 413 (01)
  • [25] Diffusion coefficient and nucleation density studies on electrochemical deposition of aluminum from chloroaluminate ionic liquid electrolytes
    Peng, Yuxiang
    Shinde, Pravin S.
    Reddy, Ramana G.
    JOURNAL OF ELECTROANALYTICAL CHEMISTRY, 2021, 895
  • [26] Understanding disorder in oxide-based electrode materials for rechargeable batteries
    Christensen, Christian Kolle
    Ravnsbaek, Dorthe Bomholdt
    JOURNAL OF PHYSICS-ENERGY, 2021, 3 (03):
  • [27] Polymer electrolyte for lithium batteries based on photochemically crosslinked poly(ethylene oxide) and ionic liquid
    Rupp, Barbara
    Schmuck, Martin
    Balducci, Andrea
    Winter, Martin
    Kern, Wolfgang
    EUROPEAN POLYMER JOURNAL, 2008, 44 (09) : 2986 - 2990
  • [28] Polyethylene oxide and ionic liquid-based solid polymer electrolyte for rechargeable magnesium batteries
    H. N. M. Sarangika
    M. A. K. L. Dissanayake
    G. K. R. Senadeera
    R. R. D. V. Rathnayake
    H. M. J. C. Pitawala
    Ionics, 2017, 23 : 2829 - 2835
  • [29] Polyethylene oxide and ionic liquid-based solid polymer electrolyte for rechargeable magnesium batteries
    Sarangika, H. N. M.
    Dissanayake, M. A. K. L.
    Senadeera, G. K. R.
    Rathnayake, R. R. D. V.
    Pitawala, H. M. J. C.
    IONICS, 2017, 23 (10) : 2829 - 2835
  • [30] Aluminum metal anode rechargeable batteries with sulfur-carbon composite cathodes and inorganic chloroaluminate ionic liquid
    Tsuda, Tetsuya
    Sasaki, Junya
    Uemura, Yuya
    Kojima, Toshikatsu
    Senoh, Hiroshi
    Kuwabata, Susumu
    CHEMICAL COMMUNICATIONS, 2022, 58 (10) : 1518 - 1521