Mechanical Properties of Q460 High-Strength Steel with Holes under High-Strain Cyclic Tensile Loading

被引：0
|
作者：
Luo W. [1 ]
Li H. [1 ,2 ]
Cao B. [1 ]
机构：
[1] College of Civil Engineering, Huaqiao University, Xiamen
[2] Key Laboratory for Intelligent Infrastructure and Monitoring of Fujian Province, Huaqiao University, Xiamen
来源：
Jianzhu Cailiao Xuebao/Journal of Building Materials | 2021年 / 24卷 / 06期
关键词：
Cyclic tensile loading; Energy dissipation; Opening steel plate; Q460 high‑strength steel;
D O I：
10.3969/j.issn.1007-9629.2021.06.022
中图分类号：
学科分类号：
摘要：
The mechanical properties of Q460 high‑strength steel specimens were tested under both monotonic and repeated tensile loading. The quantity of holes, the position of holes and the loading patterns were set as the main factors to explore their influence on failure mode, ultimate tensile strength, stress cycling characteristic and energy dissipation capability of specimens. Experimental results show that the opening holes have a significant effect on mechanical properties of Q460 specimen. Specimens with holes present obvious stress concentration phenomenon around the holes. The energy dissipation capacity and elongation of unopened specimens are much greater than those of specimens with holes. Compared with the holes along the long axis of specimen, the holes along the short axis have a more significant effect on mechanical properties of Q460 steel. Furthermore, with the same quantity of openings and opening positions, the strain amplitude of loading pattern has a greater influence on mechanical properties of specimen, and the energy dissipating capacity decreases with the increase of the strain amplitude. © 2021, Editorial Department of Journal of Building Materials. All right reserved.
引用
收藏
页码：1291 / 1299
页数：8
相关论文
共 17 条
  • [11] ZHOU Chao, Study on tensile test of perforated steel plates, Shanxi Architecture, 44, 12, (2018)
  • [12] XIE Caixia, LI Haifeng, Kunde LU, Experimental study on Q235 steel with holes under monotonic and cyclic tensile loading, Building Structure, 50, 2, (2020)
  • [13] YANG Yong, CHEN Yang, CAI Junwei, Experiment on static behavior of perfobond shear connectors, China Journal of Highway and Transport, 30, 3, (2017)
  • [14] JI Xiaolian, LIU Yangjun, WU Yaohua, Experiment study on bearing capacity of perforated steel plate shear connectors, Industrial Construction, 42, 10, (2012)
  • [15] JI Xiaolian, LIU Yangjun, WU Yaohua, Finite element analysis of perfobond shear connectors, Steel Structure, 27, 9, (2012)
  • [16] KASHFUDDOJA M, RAMJI M., Whole‑field strain analysis and damage assessment of adhesively bonded patch repair of CFRP laminates using 3D‑DIC and FEA, Composites Part B: Engineering, 53, pp. 46-61, (2013)
  • [17] ZHANG Z L, HAUGE M, THAULOW C., Determining material true stress‑strain curve from tensile specimens with rectangular cross‑section, International Journal of Solids and Structures, 36, pp. 3497-3516, (1999)
12