Additively manufactured porous Ti6Al4V Alloy with excellent mechanical properties, corrosion resistance, in vitro and in vivo biocompatibility

被引：0

作者：

Zhang, Lei ^{[1
,2
,3
]}

Hu, Hongyan ^{[4
]}

Wang, Quan ^{[5
]}

Zhou, Jing ^{[6
]}

Liu, Yan ^{[5
]}

Li, Zonghao ^{[1
,3
]}

Zhang, Yonghui ^{[5
]}

Kui, Zhitong ^{[1
,3
]}

He, Zhengyuan ^{[1
,3
]}

Jiang, Yehua ^{[1
,3
]}

机构：

[1] School of Materials Science and Engineering, Kunming University of Science and Technology, Kunming,650093, China

[2] China Nonferrous Metals Innovation Institute (Tianjin) Co, Ltd, Tianjing,300393, China

[3] National-Local Joint Engineering Research Center for Technology of Advanced Metallic Solidification Forming and Equipment, Kunming,650000, China

[4] Peking University Cancer Hospital Yunnan (Tumor Hospital of Yunnan Province), Kunming,650118, China

[5] Kunming Medical University School of Stomatology and Affiliated Stomatology Hospital, Kunming,650106, China

[6] Department of Stomatology, Kunming Yan'an Hospital, Kunming,650051, China

来源：

Journal of Alloys and Compounds | 2024年 / 1009卷

关键词：

In view of the insufficient bearing capacity of porous Ti6Al4V (TC4) alloy; four kinds of porous TC4 alloys with a wall thickness of 200 μm and a side length ranging from 400 to 700 μm were designed and subsequently prepared by Additive Manufacturing (Selective Laser Melting; SLM). The results indicated that the porous TC4 alloy was primarily comprised of α' phase and a small amount of β phase. As the side length increased; the size and volume of the acicular α' phase increased while the β phase decreased. Besides; the dislocation density also increased with the increase of side length. The porous TC4 alloy with a side length of 700 μm exhibited the maximum dislocation density of 6.07×1014 m2. The yield strength and elastic modulus initially decreased and then increased with the increase of side length. Moreover; the increase in side length induced the decrease of Icorr from 1.807 × 10−6 to 4.777 × 10−7 A/cm2; especially that sample 7–2 presented the best corrosion resistance with the smallest Icorr value (4.777 × 10−7 A/cm2). It was observed by in vitro assessment that the optical density (OD) of the porous TC4 alloys surpassed 75 % on days 1; 4; and 7. It was noteworthy that the OD value of the porous TC4 alloys with a side length of 700 μm surpassed 100 % on day 7. Furthermore; the number of adherent cells displayed an increasing trend with the increase in side length. After implanting into the alveolar bone of rabbits at 12th week; the porous TC4 alloy with a side length of 700 μm induced bone growth due to a higher percentage of bone volume compared to the dental implant. After 12 weeks of in vivo experiments; the results showed that the porous TC4 alloy could reduce the inflammatory response; promote the growth of bone tissue; and have excellent osteogenic properties. © 2024 Elsevier B.V;

D O I：

10.1016/j.jallcom.2024.176982

中图分类号：

学科分类号：

摘要：

引用

共 50 条

[1] Mechanical Properties and In Vitro Behavior of Additively Manufactured and Functionally Graded Ti6Al4V Porous Scaffolds
Onal, Ezgi
Frith, Jessica E.
Jurg, Marten
Wu, Xinhua
Molotnikov, Andrey
METALS, 2018, 8 (04):
[2] Corrosion of an Additively Manufactured Ti6Al4V Alloy in Saline and Acidic Media
Mora-Sanchez, Hugo
Collado-Vian, Miguel
Mohedano, Marta
Arrabal, Raul
Matykina, Endzhe
MATERIALS, 2024, 17 (03)
[3] Mechanical and biocompatibility studies on additively manufactured Ti6Al4V porous structures infiltrated with hydroxyapatite for implant applications
Mani, Kalayarasan (mkn.mech@psgtech.ac.in), 1600, Elsevier Ltd (1010):
[4] An Investigation of Mechanical Properties of Additively Manufactured Regolith Reinforced Titanium Alloy [Ti6Al4V]
Afrouzian, Ali
Traxel, Kellen D.
Bandyopadhyay, Amit
METAL-MATRIX COMPOSITES: ADVANCES IN PROCESSING, CHARACTERIZATION, PERFORMANCE AND ANALYSIS, 2022, : 107 - 112
[5] Mechanical properties of additively manufactured variable lattice structures of Ti6Al4V
Traxel, Kellen D.
Groden, Cory
Valladares, Jesus
Bandyopadhyay, Amit
Keck, W. M.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2021, 809
[6] Mechanical properties of additively manufactured variable lattice structures of Ti6Al4V
Traxel, Kellen D.
Groden, Cory
Valladares, Jesus
Bandyopadhyay, Amit
Materials Science and Engineering: A, 2021, 809
[7] Additively Manufactured Porous Ti6Al4V for Bone Implants: A Review
Koju, Naresh
Niraula, Suyash
Fotovvati, Behzad
METALS, 2022, 12 (04)
[8] A review on in vitro/in vivo response of additively manufactured Ti-6Al-4V alloy
Alipour, Saeid
Nour, Shirin
Attari, Seyyed Morteza
Mohajeri, Mohammad
Kianersi, Sogol
Taromian, Farzaneh
Khalkhali, Mohammadparsa
Aninwene, George E., II
Tayebi, Lobat
JOURNAL OF MATERIALS CHEMISTRY B, 2022, 10 (46) : 9479 - 9534
[9] Tribology properties of additively manufactured Ti6Al4V alloy after heat treatment
Huang, Junyuan
Zhang, Wei
Fang, Weiping
Yi, Yaoyong
TRIBOLOGY INTERNATIONAL, 2023, 185
[10] In vitro corrosion behavior and biocompatibility of nanostructured Ti6Al4V
Huo, W. T.
Zhao, L. Z.
Zhang, W.
Lu, J. W.
Zhao, Y. Q.
Zhang, Y. S.
MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS, 2018, 92 : 268 - 279

← 1 2 3 4 5 →