Diffusible hydrogen in underwater wet welding

被引：0

作者：

Kralj, S. ^{[1
]}

Garašic, I. ^{[1
]}

Kozuh, Z. ^{[1
]}

机构：

[1] Faculty of Mechanical Engineering and Naval Architecture, I. Lucica 1, HR 10000 Zagreb, Croatia

来源：

Welding in the World | 2008年 / 52卷 / SPEC. ISS.期

关键词：

Hydrogen - Petroleum transportation - Repair - Natural gas transportation - Pipelines;

D O I：

暂无

中图分类号：

学科分类号：

摘要：

The rapidly increasing development of the laying of high-strength steel underwater pipelines for the transportation of gas and oil requires adequate welding technology for maintenance and repair. As FCAW is suitable for automation and appropriate for application at greater depths it represents a welding process capable of replacing MMAW underwater wet welding. Moreover, the complexity of underwater wet welding on high strength steels up to grade X70 requires precise welding parameters and heat input control. This paper presents the basic issues of FCAW underwater wet welding. Measurement of diffusible hydrogen was made with the glycerine method for different welding parameters and levels of heat input for FCAW welding of API 5L X70 pipeline steel. In addition, hardness HV10 was also determined in order to define the effect of heat input on steel microstructure. This work was done as part of the scientific project Improvement of underwater welding and inspection which is being conducted at the Faculty of Mechanical Engineering and Naval Architecture, University of Zagreb.

引用

页码：687 / 692

共 50 条

[31] Comparison of Solidification Behavior between Underwater Wet Welding and Dry Welding
Al-Abbas, Faisal M.
Al-Ghamdi, Tariq A.
Liu, Stephen
OMAE2011: PROCEEDINGS OF THE ASME 30TH INTERNATIONAL CONFERENCE ON OCEAN, OFFSHORE AND ARCTIC ENGINEERING, VOL 3: MATERIALS TECHNOLOGY, 2011, : 285 - +
[32] A novel liquid-shielded welding solution for diffusible hydrogen content restriction and metal transfer controlling in underwater FCAW condition
Zhang, Xin
Guo, Ning
Luo, Wenxue
Xu, Changsheng
Tan, Yanbo
Fu, Yunlong
Cheng, Qi
Chen, Hao
He, Jinlong
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, 2022, 47 (11) : 7362 - 7367
[33] Underwater wet welding made simple: benefits of Hammerhead (R) wet-spot welding process
Keats, David J.
UNDERWATER TECHNOLOGY, 2009, 28 (03): : 115 - 127
[34] A study on the arc characteristics of underwater wet welding process
Chen, Bo
Tan, Caiwang
Feng, Jicai
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2016, 86 (1-4): : 557 - 564
[35] MODERN DEVELOPMENTS OF INCREASING MECHANIZATION OF UNDERWATER WET WELDING
Li, Dmitriy Sokanovich
Karpov, Vyacheslav Mikhaylovich
Murzin, Viktor Vasil'evich
MARINE INTELLECTUAL TECHNOLOGIES, 2014, 2 (02): : 87 - 93
[36] Detection of wet condition for underwater local dry welding
Ogawa, Y
PROCEEDINGS OF THE EIGHTH INTERNATIONAL OFFSHORE AND POLAR ENGINEERING CONFERENCE, VOL 4, 1998, : 169 - 172
[37] Development of Tubular Covered Electrode for Underwater Wet Welding
Pessoa, E. C. P.
Bracarense Bracarense, Alexandre Queiroz
Liu, Stephen
TRENDS IN WELDING RESEARCH, 2009, : 676 - +
[38] Flux-cored wire for underwater wet welding
State Key Laboratory of Advanced Welding and Joining, Harbin Institute of Technology, Harbin 150001, China
不详
Hanjie Xuebao, 5 (13-16):
[39] Influence of the water environment on the parameters in underwater wet welding
Kralj, Slobodan
Kozuh, Zoran
Garasic, Ivica
Dorn, h.c.Lutz
2003, DVS Media GmbH (02):
[40] Classification of Metal Transfer Mode in Underwater Wet Welding
Guo, N.
Fu, Y.
Feng, J.
Du, Y.
Deng, Z.
Wang, M.
Tang, D.
WELDING JOURNAL, 2016, 95 (04) : 133S - 140S

← 1 2 3 4 5 →