Surface-particle-emulsion heat transfer model between fluidized bed and horizontal immersed tube

被引：0

作者：

Wu, Ping ^{[1
]}

Wang, Li ^{[1
]}

Feng, Xu ^{[1
]}

Ni, Xuezi ^{[1
]}

机构：

[1] Appl. Sci. Sch., Univ. of Sci. and Technol. Beijing, Beijing 100083, China

来源：

Journal of University of Science and Technology Beijing: Mineral Metallurgy Materials (Eng Ed) | 2002年 / 9卷 / 02期

关键词：

Emulsions - Fluidized beds - Mathematical models - Surface phenomena - Two phase flow;

D O I：

暂无

中图分类号：

学科分类号：

摘要：

A mathematical model, surface-particle-emulsion heat transfer model, is presented by considering voidage variance in emulsion in the vicinity of an immersed surface. Heat transfer near the surface is treated by dispersed particles touching the surface and through the emulsion when the distance from the surface is greater than the diameter of a particle. A film with an adjustable thickness which separates particles from the surface is not introduced in this model. The coverage ratio of particles on the surface is calculated by a stochastic model of particle packing density on a surface. By comparison of theoretical solutions with experimental data from some references, the mathematical model shows better qualitative and quantitative prediction for local heat transfer coefficients around a horizontal immersed tube in a fluidized bed.

引用

页码：99 / 103

共 50 条

[21] HEAT TRANSFER BETWEEN VERY SHALLOW FLUIDIZED BEDS AND AN IMMERSED HORIZONTAL TUBE.
Konrad, K.
Huang, H.
1600, (65):
[22] The magnetic field effect on the particle behavior and heat transfer between an immersed horizontal tube and a gas magnetofluidized bed
Dolidovich, AF
Ganzha, VL
Saxena, SC
Rahman, SH
FLUIDIZATION IX, 1998, : 453 - 460
[23] Numerical prediction of heat transfer between a bubbling fluidized bed and an immersed tube bundle
A. Schmidt
U. Renz
Heat and Mass Transfer, 2005, 41 : 257 - 270
[24] Particle-Scale Simulation of the Flow and Heat Transfer Behaviors in Fluidized Bed with Immersed Tube
Zhao, Yongzhi
Jiang, Maoqiang
Liu, Yanlei
Zheng, Jinyang
AICHE JOURNAL, 2009, 55 (12) : 3109 - 3124
[25] HEAT TRANSFER BETWEEN A HORIZONTAL STAGGERED TUBE BUNDLE AND A FLUIDIZED BED.
Tamarin, A.I.
Zabrodskiy, S.S.
Yepanov, Yu.G.
Heat Transfer - Soviet Research, 1976, 8 (05): : 51 - 55
[26] Numerical prediction of heat transfer between a bubbling fluidized bed and an immersed tube bundle
Schmidt, A
Renz, U
HEAT AND MASS TRANSFER, 2005, 41 (03) : 257 - 270
[27] Heat transfer and particle behavior around horizontal tube bundle in gas fluidized bed
Miyamoto, Masahide
Katoh, Yasuo
Idei, Yasumasa
Nippon Kikai Gakkai Ronbunshu, B Hen/Transactions of the Japan Society of Mechanical Engineers, Part B, 1993, 59 (560): : 1291 - 1297
[28] Numerical investigation of the effect of the location of an immersed tube in a fluidized bed on heat transfer of surface-to-bed
Wei, Bangji
Lv, Guojun
Meng, Xiangfei
Khalid, Zeinab
Huang, Qunxing
Jiang, Xuguang
POWDER TECHNOLOGY, 2023, 430
[29] Heat transfer characteristics in a large-scale bubbling fluidized bed with immersed horizontal tube bundles
Blaszczuk, Artur
Pogorzelec, Michal
Shimizu, Tadaaki
ENERGY, 2018, 162 : 10 - 19
[30] EFFECT OF DISTRIBUTOR DESIGN ON HEAT-TRANSFER FROM AN IMMERSED HORIZONTAL TUBE IN A FLUIDIZED-BED
GREWAL, NS
SAXENA, SC
DOLIDOVICH, AF
ZABRODSKY, SS
CHEMICAL ENGINEERING JOURNAL AND THE BIOCHEMICAL ENGINEERING JOURNAL, 1979, 18 (03): : 197 - 201

← 1 2 3 4 5 →