Plasma utilization for treating wool/polyester blended fabric to improve its printability

被引:0
|
作者
Maamoun, D. [1 ]
Ghalab, S. [2 ]
机构
[1] Textile Printing, Dyeing and Finishing Department, Helwan University, Giza, Egypt
[2] Physics Deptartment, Al-Azhar University, Cairo, Egypt
来源
关键词
Compendex;
D O I
暂无
中图分类号
学科分类号
摘要
Tensile strength
引用
收藏
页码:180 / 185
相关论文
共 27 条
  • [21] Effect of plasma sericin glutaraldehyde treatments on the low stress mechanical properties of micro denier polyester/cotton blended fabric
    M. Rajalakshmi
    S. Kubera Sampath Kumar
    D. Vasanth Kumar
    M. Siva Jagadish Kumar
    C. Prakash
    Scientific Reports, 12
  • [22] Effect of plasma sericin glutaraldehyde treatments on the low stress mechanical properties of micro denier polyester/cotton blended fabric
    Rajalakshmi, M.
    Kumar, S. Kubera Sampath
    Kumar, D. Vasanth
    Kumar, M. Siva Jagadish
    Prakash, C.
    SCIENTIFIC REPORTS, 2022, 12 (01)
  • [23] Study on Wettability Improvement and Its Uniformity of Wool Fabric Treated by Atmospheric Pressure Plasma Jet
    Wang, Chunxia
    Qiu, Yiping
    JOURNAL OF APPLIED POLYMER SCIENCE, 2012, 123 (02) : 1000 - 1006
  • [24] Scintillation of polyester fabric and clothing via proton irradiation and its utilization in surface imaging of proton pencil beams
    Yamamoto, Seiichi
    Yamashita, Tomohiro
    Yoshino, Masao
    Kamada, Kei
    Yoshikawa, Akira
    Nishio, Teiji
    Kataoka, Jun
    SCIENTIFIC REPORTS, 2024, 14 (01):
  • [26] In situ Grafting of Maleic Anhydride Onto Natural Rubber to Improve Its Adhesion to Polyester Fabric: Mechanical and Spectroscopic Analyses
    Halim, S. F.
    Abou-Kandil, Ahmed I.
    Awad, A.
    Darwish, N.
    JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY, 2009, 23 (01) : 71 - 83
  • [27] Surface Modification of Polyester Fabric by Non-Thermal Plasma Treatment and Its Effect on Coloration Using Natural Dye
    Dave, Hemen
    Ledwani, Lalita
    Chandwani, Nisha
    Kikani, Purvi
    Desai, Bhakti
    Nema, S. K.
    JOURNAL OF POLYMER MATERIALS, 2013, 30 (03): : 291 - 303