Secondary Peak Load Curve of Polypropylene Crude Fiber Reinforced Lightweight Aggregate Concrete Beam

被引：0
|
作者：
Niu J. [1 ]
Liu J. [1 ]
Wang J. [2 ]
机构：
[1] School of Civil Engineering, Inner Mongolia University of Science and Technology, Baotou
[2] School of Civil Engineering, Central South University, Changsha
来源：
Cailiao Daobao/Materials Review | 2018年 / 32卷 / 07期
关键词：
Flexural strength; Lightweight aggregate reinforced concrete beam; Polypropylene fiber; Secondary peak load model;
D O I：
10.11896/j.issn.1005-023X.2018.14.015
中图分类号：
学科分类号：
摘要：
In order to study the problem of secondary peak load of polypropylene fiber reinforced concrete beams in the bending deflection curve and the quantitative relationship between fitting flexural strength and fiber content, the lightweight aggregate concrete was mixed with polypropylene fiber, the polypropylene fiber content was 0 kg/m 3 ,3 kg/m 3 ,6 kg/m 3 and 9 kg/m 3 , respectively. Four-point bending beam test was adopted to study the relationship between the fiber content and the lightweight aggregate concrete. By introducing secondary peak load model and by comparing with other literature data, the influential factors of the secondary peak load of the bending load deflection curve were discussed. The results show that when polypropylene fiber content is 6 kg/m 3 , bending toughness and flexural strength are better. In the fitting quantitative relationship between flexural strength and the fiber content ατ=3.360, compared with the ατ value in the selected literature, the value of ατ which the secondary peak does not appear is smaller, while the value of ατ which the secondary peak load appears is larger. The larger ατ value is related to the secondary peak load of the bending load deflection curve formation. The problem of secondary peak of polypropylene fiber lightweight aggregate reinforced concrete beam in the bending deflection curve can be better explained by secondary peak load model. © 2018, Materials Review Magazine. All right reserved.
引用
收藏
页码：2407 / 2411and2417
相关论文
共 30 条
  • [21] Holschemacher K., Mueller T., Ribakov Y., Effect of steel fibres on mechanical properties of high-strength concrete, Materials & Design, 31, 5, (2010)
  • [22] Fan S., Qin S., Ding Y., Steel fiber distribution and its effect on the toughness of steel fiber concrete beams, Industrial Construction, 43, 2, (2013)
  • [23] Deng Z., Liu G., Du C., Et al., Flexural toughness of a new kind of macro-polyolefin fiber reinforced high performance concrete, Journal of Building Materials, 17, 2, (2014)
  • [24] Ding Y., Cao J., Experimental study of behaviour of modified macropolypropylene fiber reinforced high performance concrete, Journal of Dalian University of Technology, 47, 5, (2007)
  • [25] Song H., Assessment of steel fiber distribution in concrete matrix and its effect on toughness, (2016)
  • [26] Naaman A.E., Reinhardt H.W., Proposed classification of HPFRC composites based on their tensile response, Materials and Structures, 39, 5, (2006)
  • [27] Oh B.H., Ji C.K., Choi Y.C., Fracture behavior of concrete members reinforced with structural synthetic fibers, Engineering Fracture Mechanics, 74, 1, (2007)
  • [28] Costa H.M.D., Ramos V.D., Oliveira M.G.D., Degradation of polypropylene (PP) during multiple extrusions: Thermal analysis, mechanical properties and analysis of variance, Polymer Testing, 26, 5, (2007)
  • [29] Swamy R.N., Al-Ta'an S.A., Deformation and ultimate strength in flexure of reinforced concrete beams made with steel fiber concrete, ACI Structural Journal, 78, 5, (1981)
  • [30] Pajak M., Ponikiewski T., Flexural behavior of self-compacting concrete reinforced with different types of steel fibers, Construction and Building Materials, 47, 10, (2013)
123