Study on performance of light propagation in tapered plastic optical fiber connector

被引：0
|
作者：
Wang, Yunming [1 ]
Sun, Xiaohan [1 ]
Zhang, Mingde [1 ]
Yang, Chun [1 ]
Ding, Dong [1 ]
机构：
[1] Dept. of Electron. Eng., Southeast Univ., Nanjing 210096, China
来源：
Dongnan Daxue Xuebao (Ziran Kexue Ban)/Journal of Southeast University (Natural Science Edition) | 2002年 / 32卷 / 03期
关键词：
Connectors (structural) - Finite difference method - Light propagation - Optical fibers - Polymers;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Based on beam propagation method, an analytical model for the tapered plastic optical fiber connector with large dimension was presented. Using Crank-Nicholson difference scheme, the section of coupler was analyzed. The effects of the coupling length and the cone angle of the taper section for the connector on the insert loss and split ratio were discussed from the large and small section respectively. According to the simulation results of the tapered connector with different coupling lengths (250-1900 μm) and cone angles (1°-9°), it was found that when the cone angle is 6° and the coupling length is 1500 μm, the performance of the coupler is good. The probation field distribution of the connector is beneficial to the design of the connector.
引用
收藏
页码：351 / 354
相关论文
共 50 条
  • [31] Light Propagation in Tapered Optical Fibers: Spatial Light Confinement and Generation of Plasmonic Waves
    Hartung, A.
    Wirth, F.
    Bartelt, H.
    PIERS 2011 MARRAKESH: PROGRESS IN ELECTROMAGNETICS RESEARCH SYMPOSIUM, 2011, : 255 - 258
  • [32] Tapered Plastic Optical Fiber Coated With HEC/PVDF for Measurement of Relative Humidity
    Batumalay, Malathy
    Lokman, Asiah
    Ahmad, Fauzan
    Arof, Hamzah
    Ahmad, Harith
    Harun, Sulaiman Wadi
    IEEE SENSORS JOURNAL, 2013, 13 (12) : 4702 - 4705
  • [33] High performance resonant cavity light emitting diode for plastic optical fiber application
    Chiou, SW
    Lee, YC
    Yang, YC
    Chang, CS
    Chen, TP
    LIGHT -EMITTING DIODES: RESEARCH, MANUFACTURING, AND APPLICATIONS VIII, 2004, 5366 : 36 - 42
  • [34] Macro-Bending Biconical Tapered Plastic Optical Fiber Humidity Sensor
    Guo, Zi
    Chu, Fenghong
    Fan, Jinyu
    Zhang, Ze
    Li, Gaofang
    Song, Xiaojun
    FIBER OPTIC SENSING AND OPTICAL COMMUNICATION, 2018, 10849
  • [35] Experimental results for characterization of a tapered plastic optical fiber sensor based on SPR
    Cennamo, N.
    Galatus, R.
    Zeni, L.
    OPTICAL SENSORS 2015, 2015, 9506
  • [36] Optical connector technologies for optical fiber network
    Abe, Yoshiteru
    Journal of the Institute of Electronics, Information and Communication Engineers, 2015, 98 (09): : 818 - 822
  • [37] Experimental and Theoretical Study of Light Propagation in Suspended-Core Optical Fiber
    Grabka, M.
    Wajnchold, B.
    Pustelny, S.
    Gawlik, W.
    Skorupski, K.
    Mergo, P.
    ACTA PHYSICA POLONICA A, 2010, 118 (06) : 1127 - 1132
  • [38] Low-Loss 1 x 2 Plastic Optical Fiber Coupler Incorporating a Tapered Polymeric Waveguide and Plastic Optical Fiber Transition Regions
    Kim, Kwang Taek
    Kim, Min Kuk
    JAPANESE JOURNAL OF APPLIED PHYSICS, 2012, 51 (09)
  • [39] Automation and dynamic characterization of light intensity with applications to tapered plastic optical fibre
    Wong, YM
    Scully, PJ
    Kadim, HJ
    Alexiou, V
    Bartlett, RJ
    JOURNAL OF OPTICS A-PURE AND APPLIED OPTICS, 2003, 5 (04): : S51 - S58
  • [40] Performance of fiber-reinforced plastic tapered poles under lateral loading
    Polyzois, D
    Ibrahim, S
    Raftoyiannis, IG
    JOURNAL OF COMPOSITE MATERIALS, 1999, 33 (10) : 941 - 960
12345