Analysis of the mechanism of longitudinal bending deformation due to welding in a steel plate by using a numerical model

被引：0
|
作者：
Kim Y.R. [1 ]
Yan J. [1 ]
Song G.Y. [2 ]
Kim J.-W. [1 ]
机构：
[1] School of Mechanical Engineering, Yeungnam Univ.
来源：
Transactions of the Korean Society of Mechanical Engineers, A | 2017年 / 41卷 / 01期
关键词：
Finite Element Analysis; Longitudinal Bending; Welding Deformation;
D O I：
10.3795/KSME-A.2017.41.1.049
中图分类号：
学科分类号：
摘要：
Welding deformation is a permanent deformation that is caused in structures by welding heat. Welding distortion is the primary cause of reduced productivity, due to welded structural strength degradation, low dimensional accuracy, and appearance. As a result, research and numerous experiments are being carried out to control welding deformation. The aim of this study is to analyze the mechanism of longitudinal bending deformation due to welding. Welding experiments and numerical analyses were performed for this study. The welding experiments were performed on 4 mm and 8.5 mm thickness steel plates, and the numerical analysis was conducted on the welding deformation using the FE software MSC.marc. © 2017 The Korean Society of Mechanical Engineers.
引用
收藏
页码：49 / 55
页数：6
相关论文
共 50 条
  • [31] Numerical Simulation and Analysis on Bending Forming of Hull Plate
    Luo, Linlin
    Bi, Dasen
    Bi, Yan
    Chu, Liang
    Ma, Xu
    Li, Jianping
    Di, Hongshuang
    PHYSICAL AND NUMERICAL SIMULATION OF MATERIAL PROCESSING VI, PTS 1 AND 2, 2012, 704-705 : 1451 - +
  • [32] Plate bending analysis by using a modified plate theory
    Suetake, Y
    CMES-COMPUTER MODELING IN ENGINEERING & SCIENCES, 2006, 11 (03): : 103 - 110
  • [33] Elastic compensation simulation of elastic/plastic axisymmetric circular plate bending using a deformation model
    Upadrasta, A
    Peddieson, J
    Buchanan, GR
    INTERNATIONAL JOURNAL OF NON-LINEAR MECHANICS, 2006, 41 (03) : 377 - 387
  • [34] Experimental and numerical study of welding deformation in truss structure of steel angles
    Tadano S.
    Mizuuchi R.
    Sugiura K.
    Nakatani Y.
    Yosetsu Gakkai Ronbunshu/Quarterly Journal of the Japan Welding Society, 2019, 37 (01): : 52 - 58
  • [35] Experimental and numerical study on fatigue performance for TIG welding and EB welding of RAFM steel plate
    Liu, Sumei
    Sun, Jinxing
    Zhou, Haibao
    Wei, Fei
    Lu, Mingxuan
    Lei, Mingzhun
    FUSION ENGINEERING AND DESIGN, 2019, 146 : 2663 - 2666
  • [36] Numerical and Experimental Analysis of Welding Deformation in Thin Plates
    Khoshravan, M. R.
    Setoodeh, M. A.
    CMC-COMPUTERS MATERIALS & CONTINUA, 2010, 16 (03): : 195 - 228
  • [37] The Effect of TIG Welding Heat Input on the Deformation of a Thin Bending Plate and Its Weld Zone
    Guo, Nan
    Hu, Hao
    Tang, Xiaojie
    Ma, Xiqiang
    Wang, Xiao
    COATINGS, 2023, 13 (12)
  • [38] Experimental research and numerical analysis of welding residual stress of butt welded joint of thick steel plate
    Lu, Wen-Liang
    Sun, Jing-Long
    Su, Han
    Chen, Liang-Jiang
    Zhou, Yong-Zheng
    CASE STUDIES IN CONSTRUCTION MATERIALS, 2023, 18
  • [39] Numerical investigation of sandwich plate in bending by a new inverse shear deformation theory based on finite element analysis
    Bhaskar, Dhiraj P.
    Bhaskar, Santosh V.
    Raj, Sachin S.
    Dhamande, L. S.
    FORCES IN MECHANICS, 2023, 13
  • [40] Experimental and Numerical Analysis on Aluminum/Steel Pipe Using Magnetic Pulse Welding
    Shim, J. Y.
    Kim, I. S.
    Lee, K. J.
    Kang, B. Y.
    METALS AND MATERIALS INTERNATIONAL, 2011, 17 (06) : 957 - 961
12345