Impact-Echo for Crack Detection in Concrete with Artificial Intelligence based on Supervised Deep Learning

被引:0
|
作者
Pandum, J. [1 ]
Hashimoto, K. [2 ]
Sugiyama, T. [2 ]
Yodsudjai, W. [3 ]
机构
[1] Environmental Material Engineering Laboratory, Graduate School of Engineering, Hokkaido University, Sapporo, Japan
[2] Environmental Material Engineering Laboratory, Faculty of Engineering, Hokkaido University, Sapporo, Japan
[3] Department of Civil Engineering, Faculty of Engineering, Kasetsart University, Thailand
来源
e-Journal of Nondestructive Testing | 2024年 / 29卷 / 06期
关键词
Artificial intelligence - Concrete - Concrete specimens - Fast fourier transform - Impact echo - Impact echo methods - Impact-echo - Non destructive testing - Non-destructive testing - Propagation behavior;
D O I
10.58286/29925
中图分类号
学科分类号
摘要
Aging concrete infrastructure such as bridges and tunnels need to be appropriately maintained in their service life because these structures must be employed with ensured safety level. Inspection and maintenance with reasonable measures are typically operated for the reinforced concrete before severe damage and failure are developed. Especially, the crack propagation in concrete can significantly affect the structural integrity, durability and overall performance of structural elements. Effective maintenance strategies are required for material and structural assessment with detection and repair of cracks to prevent further deterioration. Identification of cracks in concrete is effectively operated to extend the service life of structures for mitigating the potential safety hazards and minimize the repair costs. In order to detect the cracks in the concrete structure member, non-destructive testing (NDT) system can be often introduced to satisfy the technical issues in terms of damage evaluation and estimation of repair condition. Currently, various NDT methods have been utilized for quantitative analysis of internal damage/defects using elastic wave method such as impact-echo method, focusing on reflection of P-wave in concrete as wave propagation behavior. In experimental laboratory tests, concrete specimens are usually prepared with interior damages (cracks) which are simulated as embedded plastic plate or styrofoam. In this study, starch-type polysaccharide sheet is used to form the simulated cracks in concrete specimen. This study aims at applying impact-echo method with AI (Artificial Intelligence) to identify the internal crack information based on the waveform characteristics obtained from the elastic wave propagation behavior. The waveform results are converted to frequency spectrum by FFT analysis. Consequently, it is found in this study that AI, which is employed by supervised deep learning models, successfully evaluates the data and displays the probability of crack existence in concrete. Since FFT is a powerful algorithm that quickly converts a signal from the time domain to the frequency domain, it gives efficient analysis to the impact echo method for crack detection with the application of AI system. © 2024 The Authors.
引用
收藏
相关论文
共 50 条
  • [11] Crack detection for concrete bridges with imaged based deep learning
    Wan, Chunfeng
    Xiong, Xiaobing
    Wen, Bo
    Gao, Shuai
    Fang, Da
    Yang, Caiqian
    Xue, Songtao
    SCIENCE PROGRESS, 2022, 105 (04)
  • [12] Concrete Condition Assessment Using Impact-Echo Method and Extreme Learning Machines
    Zhang, Jing-Kui
    Yan, Weizhong
    Cui, De-Mi
    SENSORS, 2016, 16 (04):
  • [13] Impact-Echo Defect Detection in Reinforced Concrete Bridge Decks without Overlays
    Coleman, Zachary W.
    Schindler, Anton K.
    Jetzel, Christian M.
    JOURNAL OF PERFORMANCE OF CONSTRUCTED FACILITIES, 2021, 35 (05)
  • [14] Detection of Frost-Resistance Property of Large-Size Concrete Based on Impact-Echo Method
    Feng Q.
    Ren Z.
    Wang D.
    SDHM Structural Durability and Health Monitoring, 2023, 17 (01): : 71 - 88
  • [15] Identification and reconstruction of concrete mesostructure based on deep learning in artificial intelligence
    Ying, Jingwei
    Tian, Jiashuo
    Xiao, Jianzhuang
    Tan, Zhiyun
    CONSTRUCTION AND BUILDING MATERIALS, 2022, 352
  • [16] Identification and reconstruction of concrete mesostructure based on deep learning in artificial intelligence
    Ying, Jingwei
    Tian, Jiashuo
    Xiao, Jianzhuang
    Tan, Zhiyun
    Construction and Building Materials, 2022, 352
  • [17] Imaging of voids in concrete by impact-echo and ultrasonic-echo methods
    Tayfur, Sena
    Alver, Ninel
    JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY, 2018, 33 (01): : 167 - 176
  • [18] Assessing frost resistance of concrete by impact-echo method
    Lu, Xiaobin
    Ma, Fengling
    Luke, Allyn
    Wang, Ronglu
    MAGAZINE OF CONCRETE RESEARCH, 2015, 67 (06) : 317 - 324
  • [19] Detecting the Defects in Concrete Components with Impact-echo Method
    Liu, Jing
    Xie, Jun
    He, Xiaoyu
    He, Yushan
    Zhong, Jiahui
    Applied Decisions in Area of Mechanical Engineering and Industrial Manufacturing, 2014, 577 : 1114 - 1118
  • [20] Concrete compressive strength identification by impact-echo method
    Hung, Chi-Che
    Lin, Wei-Ting
    Cheng, An
    Pai, Kuang-Chih
    COMPUTERS AND CONCRETE, 2017, 20 (01): : 49 - 56