Research on characteristic of test specimen for five-axis CNC machine tools

被引：2
|
作者：
Wang W. [1 ]
Tao W. [1 ]
Li Q. [1 ]
机构：
[1] School of Mechatronics Engineering, University of Electronic Science and Technology of China, Chengdu
来源：
| 1600年 / Chinese Mechanical Engineering Society卷 / 53期
关键词：
Five-axis CNC machine tools; Geometric characteristics; Processing characteristics; Test specimen;
D O I：
10.3901/JME.2017.01.101
中图分类号：
学科分类号：
摘要：
Test specimen usually applied on checking dynamic precision of machine tools, but the performances of machine tools based on specimen cutting are still indeterminate. The modelings of four common test specimens for five-axis CNC machine tools are analyzed firstly. Then some important geometric features including the curvature, open-close angle, twisted angle of each specimen are studied. Next, the sudden change positions of acceleration on each axis are obtained during processing. So the various geometric characteristics are the key to test function of specimens. Finally, the superiority of Chinese "S" specimen is verified by the cutting experiments. The analysis results can be used to set up the relationship between test specimen and machine's dynamic performance, and contributed to the machine's error identification and traceability. © 2017 Journal of Mechanical Engineering.
引用
收藏
页码：101 / 109
页数：8
相关论文
共 15 条
  • [11] Song Y., Grasp UG NX8.5 Super Manual Completely, (2014)
  • [12] Mei X., Huang J., Differential Geometry, (2008)
  • [13] Rao V., Rao P., Effect of workpiece curvature on cutting forces and surface error in peripheral milling, Proceedings of the Institution of Mechanical Engineers. Part B: Engineering Manufacture, 220, 9, pp. 1399-1407, (2006)
  • [14] Zhu H., Liu R., A combined approach to tool path generation for flank milling of impeller blades with non-developable ruled surfaces, International Journal of Manufacturing Research, 10, 1, pp. 1-16, (2015)
  • [15] Cai Y., Xi G., Cha J., Calculation of cutter-location and error analysis in numerical control flank milling of twisted ruled surface impeller, Journal of Xi'an Jiaotong University, 38, 5, pp. 517-520, (2004)
12