The influence of spraying parameters on grinding performance for nanofluid minimum quantity lubrication

被引：0
|
作者：
机构：
[1] Mao, Cong
[2] Zou, Hongfu
[3] Huang, Xiangming
[4] Zhang, Jian
[5] Zhou, Zhixiong
来源：
Mao, C. (maocong315@yahoo.com.cn) | 1791年 / Springer London卷 / 64期
关键词：
To reduce the usage of grinding fluid; nanofluid has recently been applied to grinding process with minimum quantity lubrication (MQL) technique. In this study; surface grinding of hardened AISI 52100 steel under different spraying parameters was carried out. Grinding performance was investigated and compared in terms of grinding forces; surface roughness; and grinding temperature. Experimental results show that the MQL nozzle spraying direction has important effects on the application of the nanofluid mist; and then on the lubrication and cooling of the grinding zone. It is found that an optimal grinding performance can be obtained when the nozzle is positioned angularly toward the grinding wheel. Furthermore; it is shown that air pressure and spraying distance are also critical in order to enhance the nanofluid mist to be penetrated into the grinding zone. Grinding forces; and grinding temperature are decreased with the increase of air pressure; and grinding performance in shorter spraying distance is better than that in longer spraying distance. The influence mechanism of the spraying parameters on the grinding performance was discussed. © 2012 Springer-Verlag London Limited;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Journal article (JA)
引用
收藏
页码：9 / 12
相关论文
共 50 条
  • [31] Temperature field model and experimental verification on cryogenic air nanofluid minimum quantity lubrication grinding
    Jianchao Zhang
    Changhe Li
    Yanbin Zhang
    Min Yang
    Dongzhou Jia
    Yali Hou
    Runze Li
    The International Journal of Advanced Manufacturing Technology, 2018, 97 : 209 - 228
  • [32] A review on influence of nanoparticle parameters on viscosity of nanofluids and machining performance in minimum quantity lubrication
    Hirudayanathan, Hiru P.
    Debnath, Sujan
    Anwar, Mahmood
    Johar, Mahzan B.
    Elumalai, Naveen K.
    Iqbal, U. Mohammed
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING, 2023,
  • [33] Temperature field model and experimental verification on cryogenic air nanofluid minimum quantity lubrication grinding
    Zhang, Jianchao
    Li, Changhe
    Zhang, Yanbin
    Yang, Min
    Jia, Dongzhou
    Hou, Yali
    Li, Runze
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2018, 97 (1-4): : 209 - 228
  • [34] Performance Evaluation of Minimum Quantity Cooling Lubrication using CBN Grinding Wheel
    Li, Changhe
    Du, Chao
    Liu, Guoyu
    Zhou, Yan
    MANUFACTURING SCIENCE AND ENGINEERING, PTS 1-5, 2010, 97-101 : 1827 - +
  • [35] Investigation of Water-Based Hybrid Nanofluid on Tribological Performance in Minimum Quantity Lubrication Grinding of Nimonic-90 Superalloy
    Attar, Pirsab
    Madarkar, Rajeshkumar
    Ghosh, Sudarsan
    Rao, P. Venkateswara
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2024,
  • [36] Removal mechanism and grinding performance of ZTA nanocomposite ceramics using ternary-hybrid nanofluid minimum quantity lubrication technology
    Zhang, Xianpeng
    Yao, Peng
    Zhou, Peifa
    Wang, Cheng
    Qu, Shuoshuo
    Chu, Dongkai
    Luo, Kailei
    Li, Lin
    Zhang, Junfeng
    Huang, Chuanzhen
    JOURNAL OF MANUFACTURING PROCESSES, 2024, 132 : 1 - 13
  • [37] Temperatures in fine grinding with minimum quantity lubrication (MQL)
    M. N. Morgan
    L. Barczak
    A. Batako
    The International Journal of Advanced Manufacturing Technology, 2012, 60 : 951 - 958
  • [38] State of Art on Minimum Quantity Lubrication in Grinding Process
    Bhuyan, M.
    Sarmah, A.
    Gajrani, K. K.
    Pandey, A.
    Thulkar, T. G.
    Sankar, M. R.
    MATERIALS TODAY-PROCEEDINGS, 2018, 5 (09) : 19638 - 19647
  • [39] INVESTIGATION OF THE MINIMUM QUANTITY LUBRICATION GRINDING USING NANOFLUIDS
    Yigit, R.
    Birlik, I.
    Azem, N. F. Ak
    Bardakcioglu, O.
    Durakbasa, M. N.
    Celik, E.
    2014 INTERNATIONAL CONFERENCE ON PRODUCTION RESEARCH - REGIONAL CONFERENCE AFRICA, EUROPE AND THE MIDDLE EAST AND 3RD INTERNATIONAL CONFERENCE ON QUALITY AND INNOVATION IN ENGINEERING AND MANAGEMENT (ICPR-AEM 2014), 2014, : 427 - 430
  • [40] Study on minimum quantity lubrication in micro-grinding
    Kuan-Ming Li
    Cheng-Peng Lin
    The International Journal of Advanced Manufacturing Technology, 2012, 62 : 99 - 105
12345