Constitutive model for sand based on the critical state

被引：0

作者：

Yao Y. ^{[1
]}

Zhang M. ^{[1
,2
]}

Wan Z. ^{[3
]}

Wang N. ^{[1
]}

Zhu C. ^{[2
]}

机构：

[1] School of Transportation Science and Engineering, Beihang University, Beijing

[2] China Shandong Provincial Key Laboratory of Marine Environment and Geological Engineering, Ocean University of China, Qingdao, 266100, Shandong

[3] Research Institute of Base and Foundation, China Academy of Building Research, Beijing

来源：

Lixue Xuebao/Chinese Journal of Theoretical and Applied Mechanics | 2018年 / 50卷 / 03期

关键词：

Constitutive model; Critical state line; Reference compression curve; Sand; State parameter;

D O I：

10.6052/0459-1879-17-334

中图分类号：

学科分类号：

摘要：

The mechanical properties of sand are influenced by void ratio and compression pressure. Based on the sand critical state line characteristics, this paper describes the isotropic compression line by means of the linear relation in e-(p/pa)ξ space. A reference compression curve which is more suitable for describing the isotropic compression of sand is proposed by comparing the relationship between two different compression curve functions and critical state line functions, and the isotropic hardening rule based on the reference compression line is given. A yield surface function suitable for describing the mechanical properties of sand is proposed and a method for determining the yield surface shape parameter μ using isotropic compression and equal p paths is given. To get the potential strength Mf and the characteristic state stress ratio Mc, describe the sand compression and shear characteristics, the compression curve corresponding to stress ratio is taken as the reference curve of sand. The correlation between the current stress ratio and the reference curve of state parameter is proposed based on the isotropic compression and constant p path. Consequently, a smooth transition from reference compression curve to critical state line for the reference curve of state parameter is achieved. The established 11 parameters of the sand constitutive model can all be obtained through routine geotechnical tests or experiences. The sand constitutive model established in this paper describes well the compression and shear characteristics of Toyoura sand in different void ratios and pressures based on the model prediction, isotropic compression tests, triaxial drained and undrained tests of Toyoura sand. © 2018, Editorial Office of Chinese Journal of Theoretical and Applied Mechanics. All right reserved.

引用

页码：589 / 598

页数：9

共 26 条

[21] Pastor M.Z., Ienkiewicz O.C., Chan A.H., Generalized plasticity and the modelling of soil behaviour, International Journal for Numerical and Analytical Methods in Geomechanics, 14, 3, pp. 151-190, (1990)
[22] Manzanal D., Fernandez Merodo J.A., Pastor M., Generalized plasticity state parameter-based model for saturated and unsaturated soils. Part 1: Saturated state, International Journal for Numerical and Analytical Methods in Geomechanics, 35, 12, pp. 1347-1362, (2011)
[23] Ling H.I., Yang S., Unified sand model based on the critical state and generalized plasticity, Journal of Engineering Mechanics, 132, 12, pp. 1380-1391, (2006)
[24] Yao Y., Liu L., Luo T., UH model for sands, Chinese Journal of Geotechnical Engineering, 38, 12, pp. 2147-2153, (2016)
[25] Yao Y.P., Hou W., Zhou A.N., UH model: Three-dimensional unified hardening model for overconsolidated clays, Geotechnique, 59, 5, pp. 451-469, (2009)
[26] Yao Y., Wan Z., Qin Z., Dynamic UH model for sands and its application in FEM, Chinese Journal of Theoretical and Applied Mechanics, 44, 1, pp. 132-139, (2012)

← 1 2 3 →