Melt Quality of Aluminium-Alloys – Characterisation for Improvement

被引：0
|
作者：
Haberl, Katharina [1 ]
Schumacher, Peter [1 ,2 ]
Stauder, Bernhard [3 ]
机构：
[1] Lehrstuhl für Gießereikunde, Montanuniversität Leoben, Leoben, Austria
[2] Österreichisches Gießerei-Institut, Leoben, Austria
[3] Nemak Linz GmbH, Linz, Austria
来源：
BHM Berg- und Huttenmannische Monatshefte | 2010年 / 155卷 / 11期
关键词：
Quality control;
D O I：
10.1007/s00501-010-0604-5
中图分类号：
C93 [管理学]; T [工业技术];
学科分类号：
08 ; 12 ; 1201 ; 1202 ; 120202 ;
摘要：
Melt quality has a strong influence on all relevant properties of casting parts. For that reason melt quality attaches great importance. The aim of this study was to determine the existing melt quality in a foundry. Special emphasis was given to the influence of bifilms on melt quality and gas porosity formation. For this publication, the secondary alloy LM25 was chosen (AlSi7Mg0,5(Cu,Fe)). The melt quality was determined using reduced pressure test (RPT), porous disc filtration analysis (PoDFA), and fatigue and tensile testing techniques. The qualification of the RPT for evaluation of melt quality was examined. Furthermore, the RPT was developed into the advanced RPT. Based on the results of this study, suggestions for the measurement and moreover improvement of the melt quality have been proposed. © 2010, Springer-Verlag.
引用
收藏
页码：493 / 498
相关论文
共 50 条
  • [41] Blistering Problems Observed in Strain Induced Melt Activated Aluminium Alloys
    E. Tan
    A. R. Tarakcilar
    D. Dispinar
    Transactions of the Indian Institute of Metals, 2011, 64 : 555 - 563
  • [42] INFLUENCE OF ALKALINE PICKLING ON THE QUALITY OF BRAZING OF ALUMINIUM AND ALUMINIUM ALLOYS.
    Nikitinskii, A.M.
    1600, (23):
  • [43] METALLOGRAPHIC METHODS FOR DETERMINING THE QUALITY OF ALUMINIUM ALLOYS
    Kraner, Jakob
    Kevorkijan, Varuzan
    Godec, Matjaz
    Paulin, Irena
    MATERIALI IN TEHNOLOGIJE, 2021, 55 (04): : 541 - 547
  • [44] Improvement of performance and quality of aluminium alloy castings
    Sharshin, V.N.
    Gavrilin, I.V.
    Tikhonov, N.P.
    Litejnoe Proizvodstvo, 1993, (08): : 16 - 17
  • [45] Thermal and mechanical characterisation of friction stir welded dissimilar aluminium alloys
    Kasirajan, T.
    Kumar, M. Selva
    Ramkumar, T.
    Mohanraj, M.
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING, 2024,
  • [46] Preparation and characterisation of AAO/Ni/Ni superhydrophobic coatings on aluminium alloys
    Wang, Yuxin
    Guan, Linlin
    He, Zhen
    Tan, Jinyi
    Singh, Harshpreet
    Hayat, Muhammad D.
    Yao, Caizhen
    SURFACE ENGINEERING, 2021, 37 (10) : 1246 - 1254
  • [47] Characterisation of porous and barrier layers of anodic oxides on different aluminium alloys
    S. Feliu
    J. A. González
    V. López
    M. J. Bartolome
    E. Escudero
    E. Otero
    Journal of Applied Electrochemistry, 2007, 37 : 1027 - 1037
  • [48] Characterisation and Optimisation of a Failure-Model for High Strength Aluminium Alloys
    Schlosser, Julian Marc
    Mouchtar, Serkan
    Schneider, Robert
    Schanz, Jochen
    Rimkus, Wolfgang
    Harrison, David K.
    Macdonald, Martin
    Kulatunga, Muditha
    ADVANCES IN MANUFACTURING TECHNOLOGY XXXII, 2018, 8 : 399 - 404
  • [49] Characterisation of porous and barrier layers of anodic oxides on different aluminium alloys
    Feliu, S., Jr.
    Gonzalez, J. A.
    Lopez, V.
    Bartolome, M. J.
    Escudero, E.
    Otero, E.
    JOURNAL OF APPLIED ELECTROCHEMISTRY, 2007, 37 (09) : 1027 - 1037
  • [50] Improvement on Net Recovery of Slabs for Aluminium 5052 and 8150 Alloys
    Gobidass A.
    Kennedy E.
    Israel D.J.
    Poorani B.
    Hariram V.
    International Journal of Vehicle Structures and Systems, 2023, 15 (06) : 843 - 847
12345