Ground Fault Section Positioning Algorithm of Active Distribution Network Based on Phase Transient Power Direction

被引：0
|
作者：
Li J. [1 ]
He M. [1 ]
Huang S. [1 ]
Xu J. [2 ]
Cheng G. [2 ]
Zhou D. [2 ]
机构：
[1] College of Electrical and Information Engineering, Hunan University, Changsha
[2] Weisheng Information Technology Co., Ltd., Changsha
来源：
Gaodianya Jishu/High Voltage Engineering | 2023年 / 49卷 / 08期
关键词：
active distribution network; grounding fault location; phase transient power direction; single-phase ground; small current grounding system; transient phase voltage and phase current;
D O I：
10.13336/j.1003-6520.hve.20230004
中图分类号：
学科分类号：
摘要：
After the distributed power supply is connected to the distribution network, the accuracy of the grounding fault judgment algorithm using the phase current mutation is reduced. In order to solve the above problems, the grounding fault section positioning algorithm of active distribution network based on phase transient power direction is proposed. By establishing the equivalent model of grounding fault transient phase voltage and current of active distribution network, the analysis results show that the direction of the fault current flows from the bus to the line, and the fault line fault point downstream of the fault of the transient power absolute value is negative. According to the above characteristics, the grounding fault positioning device and phase transient power direction algorithm is designed. The simulation verification results show that this method, in which the small current grounding system at the neutral point of the distribution network is used, can be adopted to reliably judge and locate the grounding fault position in the distributed power input and exit, and different access quantity and position in the case of uneven current. Related research and its design can provide reference for the development and application of grounding fault positioning technology of active distribution network. © 2023 Science Press. All rights reserved.
引用
收藏
页码：3205 / 3215
页数：10
相关论文
共 20 条
  • [11] HUANG Chaoyi, CAI Jinding, LI Tianyou, Et al., The adaptability analysis of single-phase fault location for distribution network with generations, Electrical Engineering, 16, 7, pp. 58-62, (2015)
  • [12] YUAN Jiaxin, LI Xiang, ZHANG Zhewei, Research on single-phase grounding fault selection technology for active distribution network based on injected signal, Electrical Measurement & Instrumentation, 57, 5, pp. 44-49, (2020)
  • [13] QIN Suya, XUE Yongduan, LIU Lizheng, Et al., Transient characteristics and influence of small current grounding faults in active distribution network, Transactions of China Electrotechnical Society, 37, 3, pp. 655-666, (2022)
  • [14] ZONG Weilin, ZOU Yun, DAI Jingwei, Et al., Novel method of fault section location based on phase current increment, Journal of Electric Power Science and Technology, 35, 2, pp. 128-134, (2020)
  • [15] SONG Guobing, LI Guang, YU Yeyun, Et al., Single-phase earth fault section location based on phase current fault component in distribution network, Automation of Electric Power Systems, 35, 21, pp. 84-90, (2011)
  • [16] WAN Xinshu, FANG Lianhang, LIANG Yu, Et al., Method of fault section location for the small current single-phase-to-ground fault based on the amplitude analysis of three-phase current, Journal of Electric Power Science and Technology, 35, 4, pp. 49-57, (2020)
  • [17] ZHOU Jianghua, WAN Shanming, YAN Wenbo, Et al., Research on transient process analysis and optimization method of flexible grounding in distribution networks, High Voltage Engineering, 45, 10, pp. 3149-3156, (2019)
  • [18] LIU Keyan, SHENG Wanxing, DONG Weijie, Overview of modeling simulation and experimental research on arc grounding fault in distribution network, High Voltage Engineering, 47, 1, pp. 12-22, (2021)
  • [19] KANG Zhongjian, TIAN Aina, FENG Yanyan, Et al., Fault section locating method based on zero sequence impedance model fault feature in distribution network with distributed generators, Transactions of China Electrotechnical Society, 31, 10, pp. 214-221, (2016)
  • [20] TONG Qiang, ZHANG Donglai, XU Dianguo, Output impedance and stability analysis of converters in distributed power systems, Proceedings of the CSEE, 31, 12, pp. 57-64, (2011)
12