Mechanical Strength of Additive Manufactured and Standard Polymeric Components Joined Through Structural Adhesives

The main aim of this work is to evaluate the mechanical properties of additive manufactured polymeric parts joined with standard plastic parts through structural adhesives. The primary advantage of this technique is its ability to significantly increase the size of the final assembly by using additive manufacturing (AM) for complex joints and inexpensive, reliable extruded plastic parts for load-bearing components. This hybrid assembly combines the flexibility and shape adaptability of AM with the structural strength and cost-effectiveness of extruded polymer parts, resulting in a final design that performs comparably to the base material. The materials used in the paper are rigid acrylic adhesive and toughened acrylic, both applicable with almost no surface preparation and fast curing. The 3D-printed parts are produced in ABS, while the standard parts are in PVC. First, the work is devoted to estimating the performance of the adhesives using pin-collar joints and a combined numerical and experimental methodology. The second section presents and discusses the results of two more realistic applications of adhesive bonding to hybrid complex joints. For the pin-collar joints, the results show failure mostly in the adhesive, with an average shear stress of 11.5 MPa and 5.22 MPa and a stiffness of 4449 N/mm and 3649 N/mm for the rigid and toughened adhesives, respectively. The results of the adhesive bonding of structural joints show that the adhesive is always capable of providing the load-carrying capacity required to achieve the strength of traditionally manufactured polymeric parts. The paper shows that adhesives are a feasible way to expand the potential of 3D-printed equipment to obtain larger hybrid parts partially realized with traditional technology, especially with inexpensive off-the-shelf bars and sections.