Key extraction using thermal laser stimulation: A case study on xilinx ultrascale FPGAs

被引:0
|
作者
Lohrke H. [1 ]
Tajik S. [3 ]
Krachenfels T. [2 ]
Boit C. [1 ]
Seifert J.-P. [2 ]
机构
[1] Semiconductor Devices Group, Technische Universität Berlin
[2] Security in Telecommunications Group, Technische Universität Berlin
关键词
Bitstream Encryption; FPGA Security; Thermal Laser Stimulation;
D O I
10.13154/tches.v2018.i3.573-595
中图分类号
学科分类号
摘要
Thermal laser stimulation (TLS) is a failure analysis technique, which can be deployed by an adversary to localize and read out stored secrets in the SRAM of a chip. To this date, a few proof-of-concept experiments based on TLS or similar approaches have been reported in the literature, which do not reflect a real attack scenario. Therefore, it is still questionable whether this attack technique is applicable to modern ICs equipped with side-channel countermeasures. The primary aim of this work is to assess the feasibility of launching a TLS attack against a device with robust security features. To this end, we select a modern FPGA, and more specifically, its key memory, the so-called battery-backed SRAM (BBRAM), as a target. We demonstrate that an attacker is able to extract the stored 256-bit AES key used for the decryption of the FPGA’s bitstream, by conducting just a single non-invasive measurement. Moreover, it becomes evident that conventional countermeasures are incapable of preventing our attack since the FPGA is turned off during key recovery. Based on our time measurements, the required effort to develop the attack is shown to be less than 7 hours. To avert this powerful attack, we propose a low-cost and CMOS compatible countermeasure circuit, which is capable of protecting the BBRAM from TLS attempts even when the FPGA is powered off. Using a proof-of-concept prototype of our countermeasure, we demonstrate its effectiveness against TLS key extraction attempts. © 2018, Ruhr-University of Bochum. All rights reserved.
引用
收藏
页码:573 / 595
页数:22
相关论文
共 50 条
  • [41] An experimental and numerical case study of thermal and mechanical consequences induced by laser welding process
    Jia Y.
    Saadlaoui Y.
    Hamdi H.
    Sijobert J.
    Roux J.-C.
    Bergheau J.-M.
    Case Studies in Thermal Engineering, 2022, 35
  • [42] Key Information Extraction and Talk Pattern Analysis Based on Big Data Technology: A Case Study on YiXi Talks
    Xu, Hao
    Jiang, Chengzhi
    Huang, Chuanfeng
    Chen, Yiyang
    Yi, Mengxue
    Zhu, Zhentao
    ELECTRONICS, 2022, 11 (04)
  • [43] The solvent extraction and stripping process using Alamine 336 with a case study of uranium
    Zahakifar, Fazel
    Khanramaki, Fereshte
    Nejad, Davood Ghoddocy
    Ghazanfari, Valiyollah
    Yadollahi, Ali
    SCIENTIFIC REPORTS, 2025, 15 (01):
  • [44] Fabrication of functional metal parts using laser sintering - a case study
    Dimla, DE
    Singh, H
    Day, M
    RAPID PROTOTYPING, TOOLING AND MANUFACTURING, 2002, : 115 - 122
  • [45] Geometry error compensation using multiply laser sensors: a case study
    Zhang, Xinyu
    Ge, Liling
    ENGINEERING COMPUTATIONS, 2023,
  • [46] Geometry error compensation using multiply laser sensors: a case study
    Zhang, Xinyu
    Ge, Liling
    ENGINEERING COMPUTATIONS, 2023, 40 (9-10) : 2090 - 2109
  • [47] REPLICATION OF AN EXISTING MODEL SHAPE USING LASER SCANNING - A CASE STUDY
    Matei, Corina-Mihaela
    Blebea, Ioan
    ACTA TECHNICA NAPOCENSIS SERIES-APPLIED MATHEMATICS MECHANICS AND ENGINEERING, 2012, 55 (02): : 427 - 430
  • [48] Urban area thermal monitoring: Liepaja case study using satellite and aerial thermal data
    Gulbe, Linda
    Caune, Vairis
    Korats, Gundars
    INTERNATIONAL JOURNAL OF APPLIED EARTH OBSERVATION AND GEOINFORMATION, 2017, 63 : 45 - 54
  • [49] Bearing Fault Detection Technique by using Thermal Images: A case of Study
    Morales-Perez, Carlos
    Rangel-Magdaleno, Jose
    Peregrina-Barreto, Hayde
    Ramirez-Cortes, Juan
    Vazquez-Pacheco, Emmanuel
    2019 IEEE INTERNATIONAL INSTRUMENTATION AND MEASUREMENT TECHNOLOGY CONFERENCE (I2MTC), 2019, : 1797 - 1802
  • [50] Study of thermal behavior of alcohol-CCl4 binary mixtures using laser thermal lens spectroscopy
    M. R. Mohebbifar
    M. Almasi
    Journal of Thermal Analysis and Calorimetry, 2022, 147 : 8679 - 8687