Research on the finishing uniformity of constant eccentricity plane lapping

被引：0
|
作者：
Yuan, Ju-Long [1 ]
Wang, Zhi-Wei [1 ]
Lu, Bing-Hai [2 ]
Zhao, Wen-Hong [1 ]
机构：
[1] Precision Engineering Laboratory, Zhejiang University of Technology, Hangzhou 310014, China
[2] Department of Mechanical Engineering, Harbin Institute of Technology, Harbin 150001, China
来源：
Journal of Harbin Institute of Technology (New Series) | 2005年 / 12卷 / SUPPL. 2期
关键词：
Computer simulation - Disks (structural components) - Kinematics - Rings (components) - Surfaces;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Based on the kinematic analysis, the relative motion track equation of an arbitrarily point on the surface of lapping disk to the workpiece is obtained and the track is simulated. Then the lapping uniformity of workpiece using concentric circle-grooved and flat lapping disk is discussed. Both the theoretical analysis and experimental results point out that high flatness can't be obtained when the lapping mode of constant eccentricity, so the nonconstant eccentricity motion mode for plane lapping carried out by eccentric conditioning ring is presented, and the positive effect is proved by experimental results.
引用
收藏
页码：32 / 35
相关论文
共 50 条
  • [21] Study on the Evaluation Method of Lapping Uniformity for Ceramic Balls
    Zhou, Z. Z.
    Yuan, J. L.
    Lv, B. H.
    Zheng, J. J.
    SURFACE FINISHING TECHNOLOGY AND SURFACE ENGINEERING, 2008, 53-54 : 147 - +
  • [22] A Novel Method to Modify the Lapping Uniformity for Silicon Wafer
    Zuo, Wenjia
    Du, Xiaohui
    Zhang, Haoer
    Su, Yuanzhe
    Lei, Tingping
    Wang, Lingyun
    Sun, Daoheng
    MICRO-NANO TECHNOLOGY XIV, PTS 1-4, 2013, 562-565 : 790 - 795
  • [23] Optimization Criteria of Plane Lapping Machines
    Dobrescu, Tiberiu
    Pascu, Nicoleta-Elisabeta
    Jiga, Gabriel
    Opran, Constantin
    25TH DAAAM INTERNATIONAL SYMPOSIUM ON INTELLIGENT MANUFACTURING AND AUTOMATION, 2014, 2015, 100 : 428 - 434
  • [24] Ultraprecision Lapping for the Zirconia ceramic Plane
    Ji Hongbo
    Peng Yan
    Zhou Fenfen
    Guo Weigang
    Lv Binghai
    Zhao Ping
    ADVANCES IN ABRASIVE TECHNOLOGY XVI, 2013, 797 : 129 - 134
  • [25] FINISHING PERFORMANCE OF LAPPING FILMS APPLIED TO CYLINDRICAL SURFACES
    HIGUCHI, S
    AKAO, S
    SAITO, Y
    HANAOKA, T
    INTERNATIONAL JOURNAL OF THE JAPAN SOCIETY FOR PRECISION ENGINEERING, 1994, 28 (02): : 117 - 122
  • [26] The correlation and spectrum research on cylindrical surface lapping machined with abrasive jet finishing restricted by grinding wheel
    Liu, F.
    Gong, Y.D.
    Shan, Y.Q.
    Cai, G.Q.
    Key Engineering Materials, 2009, 389-390 : 320 - 325
  • [27] The Correlation and Spectrum Research on Cylindrical Surface Lapping Machined with Abrasive Jet Finishing Restricted by Grinding Wheel
    Liu, F.
    Gong, Y. D.
    Shan, Y. Q.
    Cai, G. Q.
    ADVANCES IN ABRASIVE TECHNOLOGY XI, 2009, 389-390 : 320 - +
  • [28] Simulation and experimental research on the abrasive trajectories of plane lapping based on rotary swing drive
    Zhu, Jianhui
    Gao, Hang
    Xu, Yuchun
    Zhao, Yanjun
    Wang, Ningchang
    Shi, Chaoyu
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 2024, 238 (12) : 1750 - 1760
  • [29] Ptolemy constant and uniformity
    Harmaala, Eero
    Klen, Riku
    PUBLICATIONES MATHEMATICAE-DEBRECEN, 2021, 98 (1-2): : 15 - 42
  • [30] LAPPING AND POLISHING OF PLANE-PARALLEL PARTS IN DOUBLE-DISK LAPPING PROCEDURE
    CARL, H
    F&M-FEINWERKTECHNIK & MESSTECHNIK, 1984, 92 (05): : 247 - 249
12345