Effect of Brake Pressure on High Frequency Braking Squeal of Disc Brakes

被引:3
|
作者
Gao P. [1 ]
Wu Y.-H. [1 ]
机构
[1] School of Mechanical and Vehicular Engineering, Beijing Institute of Technology, Beijing
来源
Gao, Pu (gaopu1989@126.com) | 1600年 / Northeast University卷 / 38期
关键词
Brake pressure; Closed-loop coupling model; Contact coupling stiffness; High frequency braking squeal; Optimal method; Static loaded modal test;
D O I
10.12068/j.issn.1005-3026.2017.09.019
中图分类号
学科分类号
摘要
Based on the closed-loop coupling modal of disc brake structures, an optimal method and static loaded modal test were used to extract the actual contact coupling stiffness with different brake pressures applied, and the connection between the brake pressures in the actual conditions and the contact coupling stiffness in the parametric model was established. Subsequently, the sensitivity analysis method was used to explore the effect of the contact coupling stiffness on the unstable tendency of the brake system. Finally, according to the corresponding relationship of brake pressures and contact coupling stiffness, the effect of contact coupling stiffness on the unstable tendency was transformed into the impact of the brake pressure on the high frequency braking squeal. The sensitive range of the brake pressure making the system tend to be unstable could be obtained, which is helpful to put forward the active control measures to suppress the high frequency braking squeal. © 2017, Editorial Department of Journal of Northeastern University. All right reserved.
引用
收藏
页码:1303 / 1308
页数:5
相关论文
共 17 条
  • [11] Abu-Bakar A.R., Ouyang H., Recent studies of car disc brake squeal, New Research on Acoustics, pp. 159-196, (2008)
  • [12] Gao P., Study on closed-loop coupling model of disc brake noise, (2015)
  • [13] Bergman F., Eriksson M., Jacobson S., Influence of disc topography on generation of brake squeal, Wear, 225, 4, pp. 621-628, (1999)
  • [14] Eriksson M., Lord J., Jacobson S., Wear and contact conditions of brake pads: dynamical in situ studies of pad on glass, Wear, 249, 3, pp. 272-278, (2001)
  • [15] Fu Z.-F., Modal Analysis Theory and Application, (2000)
  • [16] Gu S.-N., The development and present situation of structural dynamic modification, Journal of Mechanical Strength, 1, (1991)
  • [17] Su X.-D., Study on brake vibration and noise reduction methods using substructure sensitivity analysis and structural modification techniques, pp. 1-15, (2003)