Optimizing gear shifting by shift pattern rescheduling and collaborative control between engine and automatic transmission

被引:0
|
作者
Nagata, Takashi [1 ]
Hur, Hwan [1 ]
Tomizuka, Masayoshi [1 ]
机构
[1] Mechanical Systems Control Lab., Dept. of Mechanical Engineering, University of California, Berkeley, CA 94720-1740, United States
关键词
Hybrid systems - Discrete event simulation - Automobile drivers - Powertrains;
D O I
暂无
中图分类号
学科分类号
摘要
This paper discusses two practical issues in automotive powertrain control; optimization of gear shift patterns to balance driving performance and fuel economy, and smoother gear shifting to improve riding comfort. A real-time shift rescheduling method is proposed and evaluated to show its effectiveness for flexible tuning between performance and fuel economy. For smooth gear shifting, a collaborative control scheme between engine and automatic transmission (AT) gearbox is discussed to aim for a more fundamental torque control of the powertrain. To facilitate model-based approach, an AT gearbox model is devised using hybrid systems techniques to represent the discrete-event nature of automatic transmissions. © 2008 Society of Automotive Engineers of Japan, Inc. All rights reserved.
引用
收藏
页码:277 / 285
相关论文
共 50 条
  • [31] Simulation of Gear-shift Algorithm for Automatic Transmission Based on MATLAB
    Lu Xi
    Xu Xiangyang
    Liu Yanfang
    2009 WRI WORLD CONGRESS ON SOFTWARE ENGINEERING, VOL 2, PROCEEDINGS, 2009, : 476 - 480
  • [32] Automatic gear shift (ASG&reg) of the second generation with reduced shifting time
    Rinderknecht, S.
    Rühle, G.
    Seufert, M.
    Nageleisen, F.
    VDI Berichte, 2001, (1610): : 83 - 99
  • [33] Optimization of Shift Control Trajectories for Step Gear Automatic Transmissions
    Coric, Mirko
    Ranogajec, Vanja
    Deur, Josko
    Ivanovic, Vladimir
    Tseng, H. Eric
    JOURNAL OF DYNAMIC SYSTEMS MEASUREMENT AND CONTROL-TRANSACTIONS OF THE ASME, 2017, 139 (06):
  • [34] Second-order Sliding Mode Control of the Engine Speed for an Automated Manual Transmission during Gear Shifting Process
    Huang, Hua
    Guehmann, Clemens
    Yu, Yue
    2014 11TH INTERNATIONAL MULTI-CONFERENCE ON SYSTEMS, SIGNALS & DEVICES (SSD), 2014,
  • [35] System integration moves into high gear: Automating transmission shifting through engine electronics
    Wilson, R
    DIESEL PROGRESS ENGINES & DRIVES, 1996, 62 (07): : 14 - 14
  • [36] Gear Shifting Control of a Novel Power-Cycling Variable Transmission
    You, Yong
    Sun, Dongye
    Qin, Datong
    Feng, Jihao
    Peng, Hang
    Liu, Junlong
    IEEE TRANSACTIONS ON VEHICULAR TECHNOLOGY, 2021, 70 (09) : 8692 - 8706
  • [37] Iterative Learning Control for Gear Shifting Process in Electrical Mechanical Transmission
    He K.
    Lin C.
    Li L.
    Wang X.
    Jixie Gongcheng Xuebao/Journal of Mechanical Engineering, 2019, 55 (04): : 84 - 90
  • [38] Digital control for gear shift of tracked vehicle integrated transmission
    Tao, Gang
    Li, Xiao-Ran
    Yang, Hua
    Wang, Ye
    Beijing Ligong Daxue Xuebao/Transaction of Beijing Institute of Technology, 2015, 35 (07): : 701 - 705
  • [39] Gear shifting rules of electric automatic manual transmission for EQ6110 bus
    Wang, Baohua
    Luo, Yongge
    Zhang, Jianwu
    Nongye Jixie Xuebao/Transactions of the Chinese Society of Agricultural Machinery, 2007, 38 (01): : 37 - 40
  • [40] DEVELOPMENT OF GEAR SHIFT PATTERNS FOR SIX-SPEED AUTOMATIC TRANSMISSION VEHICLE
    Chian, T. Y.
    Abu Bakar, N. Z.
    Hussain, H. Meera
    JOURNAL OF ENGINEERING SCIENCE AND TECHNOLOGY, 2021, 16 (06): : 4933 - 4957