Analysis of the minimum injection melt on gas-assistanted injection process in 1-dimension filling model

被引：0
|
作者：
Li, Xiao-Ming [1 ]
Chi, Jian-Feng [1 ]
Li, Yi [1 ]
Liu, Cheng-De [1 ]
Tian, Hu [1 ]
机构：
[1] Jilin University, Changchun 130025, China
来源：
Gaofenzi Cailiao Kexue Yu Gongcheng/Polymeric Materials Science and Engineering | 2007年 / 23卷 / 01期
关键词：
Filling - Gases - Mathematical models - Pressure;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Long, cylindrical parts are usually produced with Gas-Assisted Injection Molding (GAIM) which can greatly reduce the required injection pressure and the parts' weight. However, improper setting of initial injection melt will lead to insufficiency of gas penetration or gas blow out. therefore analysis of the initial injection melt is necessary. In this article, the initial injection melt in the gas-assisted injection process was studied as gas penetration taking place in 1-dimension model, the volume of gas hollowing out was equal to the same of the melt front advancing during the filling stage of the whole process, also the formula for the minimum injection melt was given finally which can give directions for practice.
引用
收藏
页码：21 / 23
相关论文
共 50 条
  • [1] Model-based melt flow virtual sensors for filling process of injection molding
    Lin, Yu-Wei
    Cheng, J. -W. John
    POLYMER ENGINEERING AND SCIENCE, 2008, 48 (03): : 543 - 555
  • [2] Numerical Simulation of Melt Filling and Gas Penetration in Gas Assisted Injection Molding
    Li, Qiang
    Ouyang, Jie
    Wu, Guorong
    Xu, Xiaoyang
    CMES-COMPUTER MODELING IN ENGINEERING & SCIENCES, 2011, 82 (3-4): : 215 - 232
  • [3] Simulation of filling process in gas assisted injection molding by using surface model
    State Key Laboratory of Material Processing and Die and Mould Technology, Huazhong University of Science and Technology, Wuhan 430074, China
    Huazhong Ligong Daxue Xuebao, 2009, 9 (97-100):
  • [4] Connectionist model for predicting minimum gas miscibility pressure: Application to gas injection process
    Ahmadi, Mohammad Ali
    Zahedzadeh, Mohammad
    Shadizadeh, Seyed Reza
    Abbassi, Reza
    FUEL, 2015, 148 : 202 - 211
  • [5] Manufacturing Aluminum Foams by Melt Gas Injection Process
    Malekjafarian, M.
    Sadrnezhaad, S. K.
    Abravi, M. S.
    Golestanipour, M.
    Mashhadi, H. Amini
    POROUS METALS AND METALLIC FOAMS, METFOAM 2011, 2012, : 195 - 202
  • [6] Macroscopic and mesoscopic simulation of polystyrene melt in the filling process of injection molding
    Liu, Qingsheng
    Liu, Youqiong
    Jiang, Chuntao
    JOURNAL OF APPLIED POLYMER SCIENCE, 2023, 140 (29)
  • [7] Finite element analysis of injection mold filling with melt solidification
    Chen, H
    Zhou, KY
    HEAT TRANSFER SCIENCE AND TECHNOLOGY 1996, 1996, : 553 - 558
  • [8] Computational Analysis of Polymer Melt Filling in a Medical Mold Cavity During the Injection Molding Process
    Abdullah, Muhammad Khalil
    Rusdi, Mohd Syakirin
    Abdullah, Mohd Zulkifly
    Mahmud, Abdus Samad
    Ariff, Zulkifli Mohamad
    Yee, Khor Chu
    Mokhtar, Mohd Najib Ali
    PERTANIKA JOURNAL OF SCIENCE AND TECHNOLOGY, 2023, 31 (01): : 33 - 49
  • [9] THEORETICAL MODEL FOR CAVITY FILLING PROCESS IN INJECTION MOLDING
    BROYER, E
    GUTFINGER, C
    TADMOR, Z
    TRANSACTIONS OF THE SOCIETY OF RHEOLOGY, 1975, 19 (03): : 423 - 444
  • [10] Analysis and numerical simulation of polymer melt filling in micro injection molding
    Zhuang, Jian
    Yu, Tongmin
    Wang, Minjie
    Jixie Gongcheng Xuebao/Chinese Journal of Mechanical Engineering, 2008, 44 (09): : 43 - 49
12345