Effect of plasma spraying parameters on the luminescent intensity of YSZ: Tm coatings

被引：0
|
作者：
Wang, Weize [1 ]
Hong, Huoxing [1 ]
Wei, Jingjing [1 ]
Xuan, Fuzhen [1 ]
机构：
[1] Key Laboratory of Pressure Systems and Safety, Ministry of Education, East China University of Science and Technology, Shanghai 200237, China
来源：
Xiyou Jinshu Cailiao Yu Gongcheng/Rare Metal Materials and Engineering | 2014年 / 43卷 / 02期
关键词：
Luminescence - Plasma jets - Yttria stabilized zirconia - Yttrium oxide - Powders - Thermal barrier coatings;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Tm doped Y2O3-ZrO2 (YSZ) powders and coatings are prepared in order to enhance the adaptation of the coating to thermal barrier coatings. The powders were prepared by chemical process and the coatings were deposited by plasma spraying method. The effects of plasma spraying parameters on the luminescent intensity of YSZ:Tm coating were investigated. It is found that yttria solid solutes into the powder completely when the aging time is over 15 h and Zr4+ concentration is 0.2 mol/L. The luminescent intensity of powder increases with the decrement of doped concentration of Tm. Plasma spraying distance and power have obvious influence on the luminescent intensity of YSZ:Tm coatings. The lower the spraying distance and power, the higher the luminescent intensity of coatings is in the present studying range. Copyright © 2014, Northwest Institute for Nonferrous Metal Research. Published by Elsevier BV. All rights reserved.
引用
收藏
页码：481 / 484
相关论文
共 50 条
  • [31] Power controlled microstructure and infrared properties of air plasma spraying based on YSZ coatings
    Yin, Juhang
    Wang, Chao
    Zheng, Hanyu
    Zhang, Li
    Zhang, Min
    Ma, Xiaodong
    Shen, Tao
    Zhang, Wenting
    Weng, Xiaolong
    Jiang, Shaoliang
    Zhang, Xiaofeng
    Fan, Jiafeng
    Deng, Chunming
    Deng, Longjiang
    SURFACE & COATINGS TECHNOLOGY, 2021, 426
  • [32] The influence of plasma spraying parameters on microstructure and hardness of aluminium-bronze-polyester-YSZ composite coatings for plain bearings applications
    Goral, Marek
    Kubaszek, Tadeusz
    Koscielniak, Barbara
    Stawarz, Dorota
    Wozniak, Mateusz
    OCHRONA PRZED KOROZJA, 2024, 67 (04):
  • [33] Effects of critical plasma spraying parameters on microstructure and mechanical properties of LaPO4-8YSZ thick composite coatings
    Huang, Wenzhi
    Zeng, Na
    Zhong, Ruiqi
    Zhou, Xin
    Zhu, Ling
    JOURNAL OF ALLOYS AND COMPOUNDS, 2023, 938
  • [34] Effect of spraying power on microstructure and property of nanostructured YSZ thermal barrier coatings
    Wang, Jinshuang
    Sun, Junbin
    Zhang, Hao
    Dong, Shujuan
    Jiang, Jianing
    Deng, Longhui
    Zhou, Xin
    Cao, Xueqiang
    JOURNAL OF ALLOYS AND COMPOUNDS, 2018, 730 : 471 - 482
  • [35] High-Speed Laser Patterning of YSZ Ceramic Substrates for Plasma Spraying: Microstructure Manipulation and Adhesion of YSZ Coatings
    Musalek, Radek
    Tesar, Tomas
    Minarik, Jakub
    Matejicek, Jiri
    Lukac, Frantisek
    Peters, Ole
    Kraft, Sebastian
    Loeschner, Udo
    Schille, Joerg
    Dudik, Jonas
    Martan, Jiri
    JOURNAL OF THERMAL SPRAY TECHNOLOGY, 2024, 33 (07) : 2331 - 2349
  • [36] The Influence of Plasma-spraying Parameters on the Characteristics of Fluorapatite Coatings
    Yang, Chyun-Yu
    Lee, Tzer-Min
    Lu, Ying-Zhi
    Yang, Chun-Wei
    Lui, Truan-Sheng
    Kuo, Andy
    Huang, Bol-Wei
    JOURNAL OF MEDICAL AND BIOLOGICAL ENGINEERING, 2010, 30 (02) : 91 - 98
  • [37] PLASMA SPRAYING OF TITANIUM ALUMINIDE COATINGS - PROCESS PARAMETERS AND MICROSTRUCTURE
    KHOR, KA
    MURAKOSHI, Y
    TAKAHASHI, M
    SANO, T
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 1995, 48 (1-4) : 413 - 419
  • [38] Manipulation of air plasma spraying parameters for the production of ceramic coatings
    Khan, A. Nusair
    Lu, J.
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2009, 209 (05) : 2508 - 2514
  • [39] Influence of plasma spraying parameters on properties of thermal barrier coatings
    Mrdak, M. R.
    Vencl, A.
    Nedeljkovic, B. D.
    Stankovic, M.
    MATERIALS SCIENCE AND TECHNOLOGY, 2013, 29 (05) : 559 - 567
  • [40] Effect of Sulfur Acid Corrosion on the Luminescent Intensity of Plasma-Sprayed YAG:Ce Coatings
    Weize Wang
    Peng Zeng
    Hehui Wang
    Jingye Yu
    Liangmin Wu
    Journal of Thermal Spray Technology, 2017, 26 : 211 - 216
12345