Effect of plasma spraying parameters on the luminescent intensity of YSZ: Tm coatings

被引：0
|
作者：
Wang, Weize [1 ]
Hong, Huoxing [1 ]
Wei, Jingjing [1 ]
Xuan, Fuzhen [1 ]
机构：
[1] Key Laboratory of Pressure Systems and Safety, Ministry of Education, East China University of Science and Technology, Shanghai 200237, China
来源：
Xiyou Jinshu Cailiao Yu Gongcheng/Rare Metal Materials and Engineering | 2014年 / 43卷 / 02期
关键词：
Luminescence - Plasma jets - Yttria stabilized zirconia - Yttrium oxide - Powders - Thermal barrier coatings;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Tm doped Y2O3-ZrO2 (YSZ) powders and coatings are prepared in order to enhance the adaptation of the coating to thermal barrier coatings. The powders were prepared by chemical process and the coatings were deposited by plasma spraying method. The effects of plasma spraying parameters on the luminescent intensity of YSZ:Tm coating were investigated. It is found that yttria solid solutes into the powder completely when the aging time is over 15 h and Zr4+ concentration is 0.2 mol/L. The luminescent intensity of powder increases with the decrement of doped concentration of Tm. Plasma spraying distance and power have obvious influence on the luminescent intensity of YSZ:Tm coatings. The lower the spraying distance and power, the higher the luminescent intensity of coatings is in the present studying range. Copyright © 2014, Northwest Institute for Nonferrous Metal Research. Published by Elsevier BV. All rights reserved.
引用
收藏
页码：481 / 484
相关论文
共 50 条
  • [1] Effect of Plasma Spraying Parameters on the Luminescent Intensity of YSZ: Tm Coatings
    Wang Weize
    Hong Huoxing
    Wei Jingjing
    Xuan Fuzhen
    RARE METAL MATERIALS AND ENGINEERING, 2014, 43 (02) : 481 - 484
  • [2] Manufacturing nanostructured YSZ coatings by suspension plasma spraying (SPS): effect of injection parameters
    Meillot, E.
    Vert, R.
    Caruyer, C.
    Damiani, D.
    Vardelle, M.
    JOURNAL OF PHYSICS D-APPLIED PHYSICS, 2011, 44 (19)
  • [3] Plasma Spraying Process of YSZ Thermal Barrier Coatings
    Li R.
    Xing Y.
    Zhang Z.
    He F.
    Surface Technology, 2024, 53 (07): : 217 - 229
  • [4] Effect of suspension plasma spraying process parameters on YSZ coating microstructure and permeability
    Waldbillig, D.
    Kesler, O.
    SURFACE & COATINGS TECHNOLOGY, 2011, 205 (23-24): : 5483 - 5492
  • [5] Plasma spraying of thermal barrier coatings using YSZ powders
    Gulyaev, Igor
    Kuzmin, Victor
    Kornienko, Elena
    Vyalova, Anastasiya
    Tyryshkin, Pavel
    Sergachev, Dmitriy
    Vashchenko, Sergey
    MATERIALS TODAY-PROCEEDINGS, 2019, 19 : 2134 - 2138
  • [6] Impact of atmospheric plasma spraying parameters on microstructure, mechanical properties and thermal cycling performance of YSZ coatings
    Tahir, Muhammad
    Qasim, Muhammad
    Ahmed, Nisar
    Satti, Aamir Naseem
    Malik, Anwaar Ellahi
    Khan, Zuhair S.
    Anwar, Mustafa
    CERAMICS INTERNATIONAL, 2024, 50 (24) : 53976 - 53986
  • [7] Effect of atmospheric plasma spraying parameters on porosity level of alumina coatings
    Thirumalaikumarasamy, D.
    Shanmugam, K.
    Balasubramanian, V.
    SURFACE ENGINEERING, 2012, 28 (10) : 759 - 766
  • [8] Influence of different plasma spraying methods on the physical properties of YSZ coatings
    Kavaliauskas, Zydrunas
    Kezelis, Romualdas
    Milieska, Mindaugas
    Marcinauskas, Liutauras
    Valincius, Vitas
    Aikas, Mindaugas
    Uscila, Rolandas
    Baltusnikas, Arunas
    Zunda, Audrius
    SURFACES AND INTERFACES, 2021, 24
  • [9] Tribological performances of YSZ composite coatings manufactured by suspension plasma spraying
    Darut, G.
    Ageorges, H.
    Denoirjean, A.
    Fauchais, P.
    SURFACE & COATINGS TECHNOLOGY, 2013, 217 : 172 - 180
  • [10] A novel structure of YSZ coatings by atmospheric laminar plasma spraying technology
    Liu, Sen-Hui
    Li, Cheng-Xin
    Zhang, Hui-Yu
    Zhang, Shan-Lin
    Li, Lu
    Xu, Pan
    Yang, Guan-Jun
    Li, Chang-Jiu
    SCRIPTA MATERIALIA, 2018, 153 : 73 - 76
12345