Variation rules of chip flow angle in double-edge oblique cutting

被引：0
|
作者：
Wan, Zhen-Ping [1 ]
Deng, Wen-Jun [1 ]
Tang, Yong [1 ]
Ye, Bang-Yan [1 ]
机构：
[1] School of Mechanical and Automotive Engineering, South China University of Technology, Guangzhou 510640, China
来源：
Huanan Ligong Daxue Xuebao/Journal of South China University of Technology (Natural Science) | 2008年 / 36卷 / 08期
关键词：
D O I：
暂无
中图分类号：
学科分类号：
摘要：
引用
收藏
页码：83 / 87
相关论文
共 41 条
  • [31] Influence of the cutting edge rounding on the chip formation process: Part 1. Investigation of material flow, process forces, and cutting temperature
    Denkena B.
    Köhler J.
    Mengesha M.S.
    Production Engineering, 2012, 6 (4-5) : 329 - 338
  • [32] Surface energy, cutting edge radius and material flow stress size effects in continuous chip formation of metals
    Childs, T. H. C.
    CIRP JOURNAL OF MANUFACTURING SCIENCE AND TECHNOLOGY, 2010, 3 (01) : 27 - 39
  • [33] Influence of the main cutting edge angle value on minimum uncut chip thickness during turning of C45 steel
    Mikolajczyk, Tadeusz
    Latos, Hubert
    Pimenov, Danil Yu
    Paczkowski, Tomasz
    Gupta, Munish Kumar
    Krolczyk, Grzegorz
    JOURNAL OF MANUFACTURING PROCESSES, 2020, 57 : 354 - 362
  • [34] Modeling of the catastrophe of chip flow angle in the turning with double-edged tool with arbitrary rake angle based on catastrophe theory
    Cui, Hengxiang
    Wan, Xiujuan
    Xiong, Liangshan
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2019, 104 (5-8): : 2705 - 2714
  • [35] Modeling of the catastrophe of chip flow angle in the turning with double-edged tool with arbitrary rake angle based on catastrophe theory
    Hengxiang Cui
    Xiujuan Wan
    Liangshan Xiong
    The International Journal of Advanced Manufacturing Technology, 2019, 104 : 2705 - 2714
  • [36] Residual stresses induced by milling operations of ABNT 4340 steel under variation of cutting speed, edge angle and heat treatment
    de Souza, Airton
    Camara, Marcelo Araujo
    MATERIA-RIO DE JANEIRO, 2020, 25 (02): : 1 - 25
  • [37] Influence of Cutting Angle of Blade Trailing Edge on Unsteady Flow in a Centrifugal Pump Under Off-Design Conditions
    Cui, Baoling
    Zhang, Chenliang
    Zhang, Yuliang
    Zhu, Zuchao
    APPLIED SCIENCES-BASEL, 2020, 10 (02):
  • [38] On the Analytical Representation of Chip Area and Tool Geometry when Oblique Turning with Round Tools. Part 1: Chip Area Parameters under Variation of Side and Back Rake Angle
    Bushlya, V.
    Schultheiss, F.
    Gutnichenko, O.
    Zhou, J. M.
    Stahl, J. -E.
    15TH CIRP CONFERENCE ON MODELLING OF MACHINING OPERATIONS (15TH CMMO), 2015, 31 : 417 - 422
  • [39] On the Analytical Representation of Chip Area and Tool Geometry when Oblique Turning with Round Tools. Part 2: Variation of Tool Geometry along the Edge Line
    Bushlya, V.
    Schultheiss, F.
    Gutnichenko, O.
    Zhou, J. M.
    Stahl, J. -E.
    15TH CIRP CONFERENCE ON MODELLING OF MACHINING OPERATIONS (15TH CMMO), 2015, 31 : 423 - 428
  • [40] Analytical predictions and experimental validation of cutting force ratio, chip thickness, and chip back-flow angle in restricted contact machining using the universal slip-line model
    Fang, N
    Jawahir, IS
    INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2002, 42 (06): : 681 - 694
12345