Application of EAF wall injectors for high-alloy steel production

被引：0
|
作者：
Jamnik, Marko [1 ]
Gemo, Luca [2 ]
Partyka, Adam [2 ]
Miani, Stefano [2 ]
Rahm, Christian [1 ]
机构：
[1] SIJ Metal Ravne D.O.O., Ravne na Koroškem, Slovenia
[2] INTECO Special Melting Technologies GmbH, Bruck an der Mur, Austria
来源：
Iron and Steel Technology | 2018年 / 15卷 / 01期
关键词：
Steelmaking furnaces - Slags - Electric furnaces - Alloy steel - Electric arcs;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Production of high-alloy special steels in the electric arc furnace (EAF) requires the use of several different melting practices - from standard foaming slag operation through recovery heats with no foaming slag, to heats with large amounts of FeCr charged into the furnace after earlier phosphorus removal. To reach target carbon content in steel, decarburization by oxygen lancing or recarburization by carbon injection are required. This paper presents the operational results after the installation of INTECO PTI JetBurner and Annulus Burner injection tools on the EAF at Metal Ravne, a Slovenian special steel producer. The installed tools proved to be very efficient and successfully replaced previously used door lance manipulator.
引用
收藏
页码：42 / 49
相关论文
共 50 条
  • [21] Improvement of Top Casting of High-Alloy Steel into a Mold
    Chumanov, V. I.
    Chumanov, I. V.
    Pyatygin, D. A.
    [J]. RUSSIAN METALLURGY, 2011, (06): : 536 - 538
  • [22] COLD PILGER ROLLING OF HIGH-ALLOY STEEL PIPES
    ROSCH, G
    KRAUSS, R
    [J]. NEUE HUTTE, 1977, 22 (05): : 255 - 261
  • [23] MECHANIZED LINE FOR FINISHING HIGH-ALLOY STEEL PLATES
    LOBACHEV, VT
    PUPOV, VV
    ROSPASIENKO, VI
    [J]. METALLURGIST, 1984, 28 (5-6) : 212 - 215
  • [24] CRONIFER 1925 HMO - A PROMISING HIGH-ALLOY STEEL FOR SHELF OIL AND GAS-PRODUCTION
    ROCKEL, M
    JASNER, M
    [J]. CHEMICAL AND PETROLEUM ENGINEERING, 1994, 30 (7-8) : 392 - 397
  • [25] THERMAL AND METALLURGICAL ASPECTS OF FRICTION WELDING - APPLICATION TO JOINING NICKEL-BASE ALLOY WITH HIGH-ALLOY STEEL
    PERRY, D
    METAUER, G
    GANTOIS, M
    [J]. ANNALES DE CHIMIE-SCIENCE DES MATERIAUX, 1987, 12 (03): : 269 - 281
  • [26] Application of LIBS to the in-line process control of liquid high-alloy steel under pressure
    Gerhard Hubmer
    Reinhard Kitzberger
    Karl Mörwald
    [J]. Analytical and Bioanalytical Chemistry, 2006, 385 : 219 - 224
  • [27] Material-property correlations for a high-alloy special steel
    Michael, Oliver
    Rosemann, Paul
    Halle, Thorsten
    Dieck, Sebastian
    [J]. PRAKTISCHE METALLOGRAPHIE-PRACTICAL METALLOGRAPHY, 2022, 59 (02): : 60 - 74
  • [28] Application of LIBS to the in-line process control of liquid high-alloy steel under pressure
    Hubmer, G
    Kitzberger, R
    Mörwald, K
    [J]. ANALYTICAL AND BIOANALYTICAL CHEMISTRY, 2006, 385 (02) : 219 - 224
  • [29] HIGH-ALLOY STEEL IN THE PLASMA FURNACE - PROMISING NEW TECHNIQUE
    MULLER, F
    [J]. JKA-JERNKONTORETS ANNALER, 1979, 163 (04): : 26 - 29
  • [30] Fouling and biocorrosion of a high-alloy steel in the Golden Horn Bay
    Koryakova, M.D.
    Nikitin, V.M.
    Suponina, A.P.
    Zvyagintsev, A.Yu.
    Kharchenko, U.V.
    [J]. Zashchita Metallov, 2002, 38 (05): : 544 - 548
12345