Corrosion behavior of Ce-oxide/hydroxide coated AA7075-T6 prepared by dip immersion method

被引：3
|
作者：
Danaee, Iman [1 ]
Kanaani, Maryam [1 ]
Maddahy, Mohammad Hosein [1 ]
Nikmanesh, Soudabeh [1 ]
机构：
[1] Petroleum University of Technology, Abadan, Iran
来源：
Turkish Journal of Engineering and Environmental Sciences | 2014年 / 38卷 / 03期
关键词：
In this study; cerium-based conversion coating was deposited on aluminum 7075-T6 by dip immersion method. Cerium oxide/hydroxide is an environmentally friendly conversion coating. Its corrosion resistance in 3.5 wt.% NaCl solution was investigated by means of electrochemical impedance spectroscopy; potentiodynamic polarization; and surface techniques. The coated samples showed a significant decrease in corrosion rate and the coating resistance increased with increasing immersion time up to 1200 s. In addition; electrochemical impedance data showed that in the presence of cerium oxide/hydroxide conversion coatings; the charge transfer resistance of aluminum increased. Surface morphology and its chemical composition were analyzed by means of scanning electron microscopy and energy dispersive spectroscopy. © TÜBITAK;
D O I：
10.3906/muh-1403-12
中图分类号：
学科分类号：
摘要：
引用
收藏
页码：363 / 372
相关论文
共 50 条
  • [21] Mechanism of residual stress and surface roughness of substrate on fatigue behavior of micro-arc oxidation coated AA7075-T6 alloy
    Dai, Weibing
    Li, Changyou
    He, David
    Jia, Dawei
    Zhang, Yimin
    Tan, Zhi
    SURFACE & COATINGS TECHNOLOGY, 2019, 380
  • [22] Corrosion Inhibition of Pure Aluminium and Alloys AA2024-T3 and AA7075-T6 by Cerium(III) and Cerium(IV) Salts
    Rodic, Peter
    Milosev, Ingrid
    JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 2016, 163 (03) : C85 - C93
  • [23] Comprehensive analysis of mechanical properties, wear, and corrosion behavior of AA7075-T6 alloy subjected to cryogenic treatment for aviation and defense applications
    Altas, Emre
    Bati, Serkan
    Rajendrachari, Shashanka
    Erkan, Omer
    Dag, Ilker Emin
    Avar, Baris
    SURFACE & COATINGS TECHNOLOGY, 2024, 490
  • [24] Electrical Breakdown Potential Properties of AA7075-T6 Aluminium Alloy Coated in Different Thicknesses by Hard Anodising Method for Space Works
    Cal, Baris
    Salman, Serdar
    2019 9TH INTERNATIONAL CONFERENCE ON RECENT ADVANCES IN SPACE TECHNOLOGIES (RAST), 2019, : 801 - 804
  • [25] Assessment of Corrosion and Scratch Resistance of Plasma Electrolytic Oxidation and Hard Anodized Coatings Fabricated on AA7075-T6
    C. Premchand
    S. Hariprasad
    A. Saikiran
    E. Lokeshkumar
    P. Manojkumar
    B. Ravisankar
    B. Venkataraman
    N. Rameshbabu
    Transactions of the Indian Institute of Metals, 2021, 74 : 1991 - 2002
  • [26] Assessment of Corrosion and Scratch Resistance of Plasma Electrolytic Oxidation and Hard Anodized Coatings Fabricated on AA7075-T6
    Premchand, C.
    Hariprasad, S.
    Saikiran, A.
    Lokeshkumar, E.
    Manojkumar, P.
    Ravisankar, B.
    Venkataraman, B.
    Rameshbabu, N.
    TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2021, 74 (08) : 1991 - 2002
  • [27] Fatigue behavior of AA7075-T6 aluminum alloy coated with a WC-10Co-4Cr cermet by HVOF thermal spray
    Puchi-Cabrera, E. S.
    Staia, M. H.
    Santana, Y. Y.
    Mora-Zorrilla, E. J.
    Lesage, J.
    Chicot, D.
    La Barbera-Sosa, J. G.
    Ochoa-Perez, E.
    Villalobos-Gutierrez, C. J.
    SURFACE & COATINGS TECHNOLOGY, 2013, 220 : 122 - 130
  • [28] The influence of additional salts on corrosion inhibition by cerium(III) acetate in the protection of AA7075-T6 in chloride solution
    Rodic, Peter
    Milosev, Ingrid
    CORROSION SCIENCE, 2019, 149 : 108 - 122
  • [29] Improved corrosion protection of Al alloys by system approach interface engineering: Part 3 - AA7075-T6
    Moffitt, CE
    Reddy, CM
    Yu, QS
    Wieliczka, DM
    Johnson, R
    Deffeyes, JE
    Yasuda, HK
    CORROSION, 2000, 56 (10) : 1032 - 1045
  • [30] The influence of vibration amplitude on AA7075-T6 corrosion resistance improvement during ultrasonic-assisted burnishing
    Sayadi, Daniyal
    Bagheri, Mohammad
    Khosrojerdi, Mohammadreza
    Khajehzadeh, Mohsen
    Razfar, Mohammad Reza
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS, 2023, 237 (09) : 1990 - 2008
12345