Corrosion behavior of Ce-oxide/hydroxide coated AA7075-T6 prepared by dip immersion method

被引：3
|
作者：
Danaee, Iman [1 ]
Kanaani, Maryam [1 ]
Maddahy, Mohammad Hosein [1 ]
Nikmanesh, Soudabeh [1 ]
机构：
[1] Petroleum University of Technology, Abadan, Iran
来源：
Turkish Journal of Engineering and Environmental Sciences | 2014年 / 38卷 / 03期
关键词：
In this study; cerium-based conversion coating was deposited on aluminum 7075-T6 by dip immersion method. Cerium oxide/hydroxide is an environmentally friendly conversion coating. Its corrosion resistance in 3.5 wt.% NaCl solution was investigated by means of electrochemical impedance spectroscopy; potentiodynamic polarization; and surface techniques. The coated samples showed a significant decrease in corrosion rate and the coating resistance increased with increasing immersion time up to 1200 s. In addition; electrochemical impedance data showed that in the presence of cerium oxide/hydroxide conversion coatings; the charge transfer resistance of aluminum increased. Surface morphology and its chemical composition were analyzed by means of scanning electron microscopy and energy dispersive spectroscopy. © TÜBITAK;
D O I：
10.3906/muh-1403-12
中图分类号：
学科分类号：
摘要：
引用
收藏
页码：363 / 372
相关论文
共 50 条
  • [1] Quantification of Accelerated Corrosion Testing of Coated AA7075-T6
    Feng, Zhicao
    Frankel, G. S.
    Matzdorf, C. A.
    JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 2014, 161 (01) : C42 - C49
  • [2] Fatigue behavior of AA7075-T6 aluminum alloy coated with ZrN by PVD
    Puchi-Cabrera, E. S.
    Staia, M. H.
    Lesage, J.
    Gil, L.
    Villalobos-Gutierrez, C.
    La Barbera-Sosa, J.
    Ochoa-Perez, E. A.
    Le Bourhis, E.
    INTERNATIONAL JOURNAL OF FATIGUE, 2008, 30 (07) : 1220 - 1230
  • [3] Localized Corrosion Inhibition of AA7075-T6 by Calcium Sulfate
    Klomjit, Pitichon
    Buchheit, R. G.
    CORROSION, 2016, 72 (04) : 486 - 499
  • [4] Corrosion behaviour of mechanically polished AA7075-T6 aluminium alloy
    Liu, Y.
    Laurino, A.
    Hashimoto, T.
    Zhou, X.
    Skeldon, P.
    Thompson, G. E.
    Scamans, G. M.
    Blanc, C.
    Rainforth, W. M.
    Frolish, M. F.
    SURFACE AND INTERFACE ANALYSIS, 2010, 42 (04) : 185 - 188
  • [5] Acoustic emission as a reliable technique for filiform corrosion monitoring on coated AA7075-T6: Tailored data processing
    Abarkane, C.
    Florez-Tapia, A. M.
    Odriozola, J.
    Artetxe, A.
    Lekka, M.
    Garcia-Lecina, E.
    Grande, H. -j.
    Vega, J. M.
    CORROSION SCIENCE, 2023, 214
  • [6] Topographical analysis of pitting corrosion in AA7075-T6 using laser profilometry
    Koul, MG
    CORROSION, 2003, 59 (07) : 563 - 574
  • [7] Test environment selection for corrosion-fatigue testing of AA7075-T6
    Ciccone, MP
    Gangloff, RP
    Kelly, RG
    CORROSION AND PROTECTION OF LIGHT METAL ALLOYS, 2004, 2003 (23): : 82 - 93
  • [8] Corrosion Studies on Friction Welded Dissimilar Aluminum Alloys of AA7075-T6 and AA6061 -T6
    Sathish, R.
    Rao, V. Seshagiri
    INTERNATIONAL JOURNAL OF ELECTROCHEMICAL SCIENCE, 2014, 9 (08): : 4104 - 4113
  • [9] Influence of Concentration and pH of Hexafluorozirconic Acid on Corrosion Resistance of Anodized AA7075-T6
    Pinheiro, Jessica Salles
    Regio, Gabriel
    Piaggio Cardoso, Henrique Ribeiro
    Oliveira, Claudia Trindade
    Ferreira, Jane Zoppas
    MATERIALS RESEARCH-IBERO-AMERICAN JOURNAL OF MATERIALS, 2019, 22
  • [10] Insight into the localized strain effect on micro-galvanic corrosion behavior in AA7075-T6 aluminum alloy
    Li, Ni
    Dong, Chaofang
    Man, Cheng
    Li, Xiao
    Kong, Decheng
    Ji, Yucheng
    Ao, Min
    Cao, Jiangli
    Yue, Liang
    Liu, Xiaoteng
    Du, Min
    CORROSION SCIENCE, 2021, 180
12345