Effect of compatibilisers on thermal and morphological properties of polylactic acid/natural rubber blends

被引：0
|
作者：
Mohammad N.N.B. [1 ]
Arsad A. [1 ]
Sani N.S.A. [1 ]
Basri M.H. [1 ]
机构：
[1] Enhanced Polymer Research Group, Polymer Engineering Department, Faculty of Chemical and Energy Engineering, Universiti Teknologi Malaysia, Skudai, Johor
来源：
Chemical Engineering Transactions | 2017年 / 56卷
关键词：
Polyesters;
D O I：
10.3303/CET1756172
中图分类号：
学科分类号：
摘要：
In this study, the effects of compatibilisers on morphology, mechanical and thermal properties of polylactic acid (PLA)/natural rubber (NR) blends were determined with the composition of 95/5 (designated as PLA95/NR5). The PLA95/NR5 blend was incorporated with two different compatibilisers maleated polylactic acid (PLA-g-MA) and maleated natural rubber (NR-g-MA) at various loadings (1-10 phr) and compounding was prepared using twin screw extruder. The samples were then characterised using DSC, SEM and DMA. The SEM results showed better interfacial adhesion between PLA and NR phases was achieved upon addition of 3 phr PLA-g-MA. In all cases, further increased PLA-g-MA and NR-g-MA up to 5 phr and 10 phr, respectively in the PLA95/NR5 blend caused the blend stiffness to decrease as decreasing in degree of crystallinity of PLA showed in DSC analysis. Copyright © 2017, AIDIC Servizi S.r.l..
引用
收藏
页码：1027 / 1032
页数：5
相关论文
共 50 条
  • [31] Effect of Silicon Carbide on the Properties of Natural Rubber Blends with EPDM Rubber
    Anancharoenwong, Ekasit
    Marthosa, Sutida
    Suklueng, Montri
    Niyomwas, Sutham
    Chaiprapat, Sumate
    INTERNATIONAL JOURNAL OF INTEGRATED ENGINEERING, 2020, 12 (02): : 234 - 240
  • [32] Improving the Properties of Polylactic Acid by Blending With Low Molecular Weight Polylactic Acid-g-Natural Rubber
    Thepthawat, Apicha
    Srikulkit, Kawee
    POLYMER ENGINEERING AND SCIENCE, 2014, 54 (12): : 2770 - 2776
  • [33] Application of polymethylmethacrylate-grafted cellulose as reinforcement for compatibilised polylactic acid/natural rubber blends
    Rosli, Noor Afizah
    Ahmad, Ishak
    Anuar, Farah Hannan
    Abdullah, Ibrahim
    CARBOHYDRATE POLYMERS, 2019, 213 : 50 - 58
  • [34] Preparation and properties of thioglycollic acid modified epoxidised natural rubber and its blends with natural rubber
    Okwu, UN
    Okieimen, FE
    EUROPEAN POLYMER JOURNAL, 2001, 37 (11) : 2253 - 2258
  • [35] Thermoplastic Elastomers Based on Natural Rubber/Polypropylene Blends: Effect of Blend Ratios and Dynamic Vulcanization on Rheological, Thermal, Mechanical, and Morphological Properties
    Passador, Fabio Roberto
    Alzate Rojas, Galia Johanna
    Pessan, Luiz Antonio
    JOURNAL OF MACROMOLECULAR SCIENCE PART B-PHYSICS, 2013, 52 (08): : 1142 - 1157
  • [36] Mechanical, morphological, thermal properties and hydrolytic degradation behavior of polylactic acid/polypropylene carbonate blends prepared by solvent casting
    Haneef, Intan Najwa Humaira Mohamed
    Buys, Yose Fachmi
    Shaffiar, Norhashimah Mohd
    Haris, Nurul Assadiqah
    Hamid, Abdul Malek Abdul
    Shaharuddin, Sharifah Imihezri Syed
    POLYMER ENGINEERING AND SCIENCE, 2020, 60 (11): : 2876 - 2886
  • [37] Thermoplastic vulcanizates based on poly(methyl methacrylate)/epoxidized natural rubber blends: Mechanical, thermal, and morphological properties
    Nakason, Charoen
    Tobprakhon, Akarapong
    Kaesaman, Azizon
    Journal of Applied Polymer Science, 2005, 98 (03): : 1251 - 1261
  • [38] Investigation of Rheological, Morphological and Mechanical Properties, Thermal Stability, Biodegradability of the Dynamically Cured Natural Rubber/Polyester Blends
    S. Pichaiyut
    P. Faibunchan
    C. Kummerlöwe
    N. Vennemann
    C. Nakason
    Journal of Polymers and the Environment, 2023, 31 : 1051 - 1070
  • [39] Thermoplastic elastomer based on high-density polyethylene/natural rubber blends: rheological, thermal, and morphological properties
    Nakason, C.
    Jamjinno, S.
    Kaesaman, A.
    Kiatkalmjornwong, S.
    POLYMERS FOR ADVANCED TECHNOLOGIES, 2008, 19 (02) : 85 - 98
  • [40] Thermoplastic vulcanizates based on poly(methyl methacrylate)/epoxidized natural rubber blends: Mechanical, thermal, and morphological properties
    Nakason, C
    Tobprakhon, A
    Kaesarnan, A
    JOURNAL OF APPLIED POLYMER SCIENCE, 2005, 98 (03) : 1251 - 1261
12345