Performances of the high strength low heat pump concrete (HLPC)

被引：0

作者：

Zhang, Yun-Sheng ^{[1
]}

Sun, Wei ^{[1
]}

Hu, Shu-Guang ^{[1
]}

Ding, Qing-Jun ^{[1
]}

机构：

[1] Dept. of Materials Science and Eng., Southeast University, Nanjing 210096, China

来源：

Journal Wuhan University of Technology, Materials Science Edition | 2002年 / 17卷 / 03期

关键词：

Composition - Compressive strength - Concretes - Hydration - Physical properties - Pumps;

D O I：

暂无

中图分类号：

学科分类号：

摘要：

The effects of mineral admixtures on fluidity, mechanical and hydrational exothermic behavior were studied. The results show that, double-adding ways, i e, fly ash and slag were added at the same time, not only improves the fluidity of fresh concrete with low W/B and compensates the lower early compressive strength of harden concrete caused by high adding amount of fly ash, but also greatly reduces the highest temperature rise, exothermic rate and total heat liberation of 3 day of binder pastes in HLPC, and postponed the arrival time of the highest temperature rise. HLPC was prepared and applied to project practice successfully.

引用

页码：56 / 59

共 50 条

[41] Energy performances of a ground-source heat pump system
Minea, V
RESEARCH, DESIGN AND CONSTRUCTION OF REFRIGERATION AND AIR CONDITIONING EQUIPMENTS IN EASTERN EUROPEAN COUNTRIES, 1996, : 116 - 125
[42] Experimental analysis of the performances of a surface water source heat pump
Schibuola, Luigi
Scarpa, Massimiliano
ENERGY AND BUILDINGS, 2016, 113 : 182 - 188
[43] Effects of hydration heat velocity on autogenous shrinkage of high-strength concrete
Kim, Gyuyong
Koo, Kyungmo
MAGAZINE OF CONCRETE RESEARCH, 2013, 65 (23) : 1385 - 1395
[44] The deteriorations of reinforced concrete and the option of high performances reinforced concrete
Chemrouk, Mohamed
CIVIL ENGINEERING INNOVATION FOR A SUSTAINABLE, 2015, 125 : 713 - 724
[45] Creep prediction of pump high strength concrete by using updated B3 model
College of Civil Engineering, Tongji University, Shanghai 200092, China
Jianzhu Cailiao Xuebao/Journal of Building Materials, 2007, 10 (01): : 101 - 104
[46] Comparison between high strength concrete and normal strength concrete subjected to high temperature
Chan, Sammy Y.N.
Peng, Gai-fei
Chan, John K.W.
Materials and Structures/Materiaux et Constructions, 1996, 29 (194): : 616 - 619
[47] Compressive strength performance of low- and high-strength concrete soaked in mineral oil
Diab, Hesham
CONSTRUCTION AND BUILDING MATERIALS, 2012, 33 : 25 - 31
[48] Impact of low sulfate metakaolin on strength and chloride resistance of cement mortar and high strength concrete
Suwanpruk, J
Sujjavanich, S
Punyanusornkit, J
SYSTEM-BASED VISION FOR STRATEGIC AND CREATIVE DESIGN, VOLS 1-3, 2003, : 1759 - 1763
[49] Comparison between high strength concrete and normal strength concrete subjected to high temperature
Chan, SYN
Peng, GF
Chan, JKW
MATERIALS AND STRUCTURES, 1996, 29 (194) : 616 - 619
[50] SHEAR TESTS OF HIGH-STRENGTH AND LOW-STRENGTH CONCRETE BEAMS WITHOUT STIRRUPS
MPHONDE, AG
FRANTZ, GC
JOURNAL OF THE AMERICAN CONCRETE INSTITUTE, 1984, 81 (04): : 350 - 357

← 1 2 3 4 5 →