The short-term corrosion behavior of CLAM steel TIG weldment in liquid lead bismuth eutectic

被引：0

作者：

Cui, Jian ^{[1
]}

Lei, Yucheng ^{[1
,2
]}

Yue, Jiajia ^{[1
]}

Sang, Jing ^{[1
]}

Zhu, Qiang ^{[1
]}

Lu, Yan ^{[1
]}

机构：

[1] College of Material Science and Engineering, Jiangsu University, Zhenjiang, China

[2] Jiangsu Province Key Laboratory of High-end Structual Materials, Zhenjiang, China

来源：

Gongneng Cailiao/Journal of Functional Materials | 2015年 / 46卷

关键词：

CLAM steel - Corrosion behavior - Corrosion time - Lead-bismuth eutectics - Low activation - Steel components - Tempering process - TIG;

D O I：

暂无

中图分类号：

学科分类号：

摘要：

The corrosion behavior of China Low Activation Martensitic (CLAM) steel TIG weldment(weld zone and heat affected zone)in stagnant lead bismuth eutectic saturated by oxygen at 500 was studied in this paper. The corrosion time of as-welded CLAM steel was 200 and 400 h, while the as-tempered CLAM steel was exposed for 400 h. The results show that dissolution of steel components was observed. A protective double layer oxide film which consists of a loose and porous Fe3O4 outer layer and a dense Fe-Cr spinel inner layer was formed on surface of all the samples. No penetration of Pb, Bi into the matrix was found. The post-weld tempering process can improve corrosion resistance effectively. The corrosion resistance of heat affected zone was superior to weld zone. ©, 2015, Journal of Functional Materials. All right reserved.

引用

页码：110 / 114

共 50 条

[41] Si segregation and relevant effect on the corrosion propagation in F/M steel exposed to liquid lead-bismuth eutectic
Yuan, Rui
Shi, Jiajian
Yang, Jinxue
Chen, Yingxue
Huang, Guoqiang
Lu, Chenyang
Zhang, Feifei
Meng, Fanqiang
CORROSION ENGINEERING SCIENCE AND TECHNOLOGY, 2022, 57 (07) : 648 - 653
[42] Corrosion behavior of T91 steel in liquid lead-bismuth eutectic at 550 °C: Effects of exposure time and dissolved oxygen concentration
Zhu, Zhaoguang
Zhang, Qiang
Tan, Jibo
Wu, Xinqiang
Ma, Haibin
Zhang, Ziyu
Ren, Qisen
Han, En-Hou
Wang, Xiang
CORROSION SCIENCE, 2022, 204
[43] High-temperature corrosion behavior of 316 H stainless steel in lead-bismuth eutectic containing cesium
Zhao, Jinwei
Wang, Youbin
Zeng, Pincheng
Liao, Zhonghui
Zou, Qing
Wang, Xinpeng
Wei, Yuezhou
CORROSION SCIENCE, 2024, 236
[44] Effect of Irradiation on Corrosion Behavior of 316L Steel in Lead-Bismuth Eutectic with Different Oxygen Concentrations
Okubo, Nariaki
Fujimura, Yuki
Tomobe, Masakatsu
QUANTUM BEAM SCIENCE, 2021, 5 (03)
[45] A new procedure for solving the transport of corrosion products in liquid lead bismuth eutectic loop
Li, Yaodi
Huang, Mei
Wang, Boxue
Meng, Xiangyuan
Cheng, Yanting
ENGINEERING ANALYSIS WITH BOUNDARY ELEMENTS, 2025, 171
[46] Corrosion scales on various steels after exposure to liquid lead-bismuth eutectic
Lambrinou, K.
Koch, V.
Coen, G.
Van den Bosch, J.
Schroer, C.
JOURNAL OF NUCLEAR MATERIALS, 2014, 450 (1-3) : 244 - 255
[47] Corrosion Behavior of Ti3SiC2 in Flowing Liquid Lead-Bismuth Eutectic at 500 °C
Lyu, Liangliang
Qiu, Xi
Yue, Huifang
Zhou, Mingyang
Zhu, Huiping
MATERIALS, 2022, 15 (21)
[48] Effect of Silicon and Aluminum Addition on Corrosion Behavior of ODS Iron-Based Alloys in Liquid Lead–Bismuth Eutectic
Jing Li
Xiaochen Zhang
Haibin Ma
Liangyin Xiong
Shi Liu
Qisen Ren
Zhengzheng Pang
Acta Metallurgica Sinica (English Letters), 2023, 36 : 732 - 744
[49] The Effects of Edge Dislocations on The Corrosion Behavior of Pure Iron in Liquid Lead-Bismuth Eutectic: A Molecular Dynamics Study
Chen, Liming
Liu, Sijie
Wang, Li
Gan, Shuyun
Wen, Chunmei
Li, Jiaqi
Wu, Zhongzheng
He, Xiaoxun
Xu, Shuai
Deng, Zhiyong
Krsjak, Vladimir
Daghbouj, Nabil
Cao, Qilong
Li, Bingsheng
ANNALS OF NUCLEAR ENERGY, 2024, 206
[50] Microstructural evolution and corrosion resistance of ZrO2 coated ferrite/martensite steel in liquid lead-bismuth eutectic
Zhu, Changda
Zhou, Mingyang
Li, Quan
Zhang, Wei
Zhong, Yilong
Li, Qingyu
Zhou, Yi
Chen, Qingsong
Liu, Ning
Yang, Jijun
MATERIALS TODAY COMMUNICATIONS, 2023, 35

← 1 2 3 4 5 →