Liquation Cracking in Linear Friction Welded Directionally Cast Alloy 247

被引：0
|
作者：
Neidel, A. [1 ]
Giller, M. [1 ]
Riesenbeck, S. [1 ]
机构：
[1] Siemens Energy, Gasturbinenwerk Berlin, Werkstoffpruflab, Huttenstr 12, D-10548 Berlin, Germany
来源：
PRAKTISCHE METALLOGRAPHIE-PRACTICAL METALLOGRAPHY | 2022年 / 59卷 / 10期
关键词：
Alloy; 247; nickel base superalloy; directionally solidified investment casting; translatory friction welding; hot cracking sensitivity;
D O I：
10.1515/pm-2022-0059
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
Linear Friction Welding (LFW) is a rarely used joining technology. To test the suitability of this solid-state process for hot cracking-sensitive nickel base superalloys, tests were performed using conventionally and directionally cast slabs of Alloy 247. Since LFW does not involve melting of the weld flanks, there were some expectations that this special welding technique could overcome the poor weldability of Alloy 247. However, all tested specimens failed by liquation cracking (LC) within the Weld Center Zone (WCZ) at the directionally cast side.
引用
收藏
页码：641 / 651
页数：11
相关论文
共 50 条
  • [1] Suppressed liquation and microcracking in linear friction welded WASPALOY
    Chamanfar, A.
    Jahazi, M.
    Gholipour, J.
    Wanjara, P.
    Yue, S.
    MATERIALS & DESIGN, 2012, 36 : 113 - 122
  • [2] Heat-Affected-Zone Liquation Cracking in Welded Cast Haynes® 282®
    Singh, Sukhdeep
    Andersson, Joel
    METALS, 2020, 10 (01)
  • [3] Intergranular liquation cracking in heat affected zone of a welded nickel based superalloy in as cast condition
    Ojo, O. A.
    MATERIALS SCIENCE AND TECHNOLOGY, 2007, 23 (10) : 1149 - 1155
  • [4] Liquation cracking in laser beam welded joint of ZK60 magnesium alloy
    Yu Zhao-hui
    Yan Hong-ge
    Yin Xu-yu
    Li Ying
    Yan Guo-hua
    TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2012, 22 (12) : 2891 - 2897
  • [5] Liquation cracking in aluminium alloy welds
    Hermann, R
    Birley, SS
    Holdway, P
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1996, 212 (02): : 247 - 255
  • [6] Liquation cracking in aluminium alloy welds
    Open Univ, Milton Keynes, United Kingdom
    Mater Sci Eng A Struct Mater Prop Microstruct Process, 1600, 2 (247-255):
  • [7] Influence of heat input on HAZ liquation cracking in laser welded GH909 alloy
    Yan, Fei
    Hu, Chongjing
    Zhang, Xiong
    Cai, Yuanzheng
    Wang, Chunming
    Wang, Jun
    Hu, Xiyuan
    OPTICS AND LASER TECHNOLOGY, 2017, 92 : 44 - 51
  • [8] Use of Friction Buttering for Overcoming HAZ Liquation Cracking
    G. M. Karthik
    G. D. Janaki Ram
    Ravi Sankar Kottada
    Metallurgical and Materials Transactions B, 2017, 48 : 2274 - 2280
  • [9] Use of Friction Buttering for Overcoming HAZ Liquation Cracking
    Karthik, G. M.
    Ram, G. D. Janaki
    Kottada, Ravi Sankar
    METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE, 2017, 48 (05): : 2274 - 2280
  • [10] Liquation cracking in fiber laser welded joints of inconel 617
    Ren, Wenjie
    Lu, Fenggui
    Yang, Renjie
    Liu, Xia
    Li, Zhuguo
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2015, 226 : 214 - 220
12345