Research on Partial Discharge Location Using Modified Cross-Correlation Method Considering Frequency Characteristic of Phase Velocity

被引:0
|
作者
Xie M. [1 ]
Zhou K. [1 ]
Zhao S. [1 ]
He M. [2 ]
Zhang F. [1 ]
Zhao W. [3 ]
机构
[1] School of Electrical Engineering and Information, Sichuan University, Chengdu, 610065, Sichuan Province
[2] Electric Power Research Institute of State Grid Chongqing Electric Power Company, Yubei District, Chongqing
[3] Yunnan Electric Power Grid Co., Ltd., Kunming, 650200, Yunnan Province
来源
Zhou, Kai (zhoukai_scu@163.com) | 1661年 / Power System Technology Press卷 / 42期
基金
中国博士后科学基金;
关键词
Location accuracy; Partial discharge; Phase velocity; Power cable; Time delay estimation;
D O I
10.13335/j.1000-3673.pst.2017.2390
中图分类号
学科分类号
摘要
Partial discharge (PD) detection for power cables are a useful method in cable diagnosis. Considering low accuracy of traditional time delay estimation methods for PD location, this paper takes frequency characteristic of phase velocity into account to modify phase difference of partial discharge. This method can retain performance of noise rejection of traditional cross-correlation method, but with higher location accuracy. Simulations of different signals for noise ratios (SNR) and PD points were performed with MATLAB software, and then validity of the method was confirmed with experiments performed on a 498 m 10 kV XLPE cable with oscillation wave test system (OWTS). Results show that the method can effectively locate PD sources with high accuracy after modifying phase difference of PD signals with phase velocity, and location results have good robustness under different positions. Meanwhile, the method has low location errors even in low SNR (-5 dB). © 2018, Power System Technology Press. All right reserved.
引用
收藏
页码:1661 / 1667
页数:6
相关论文
共 23 条
  • [11] Mardiana R., Su C.Q., Partial discharge location in power cables using a phase difference method, IEEE Transactions on Dielectrics and Electrical Insulation, 17, 6, pp. 1738-1746, (2010)
  • [12] Wagenaars P., Wouters P.A.A.F., Van Der Wielen P.C.J.M., Et al., Accurate estimation of the time-of-arrival of partial discharge pulses in cable systems in service, IEEE Transactions on Dielectrics and Electrical Insulation, 15, 4, pp. 1190-1199, (2008)
  • [13] Bao Y., Partial discharge pulse waveform feature extraction and classification techniques, Proceedings of the CSEE, 33, 28, pp. 168-175, (2013)
  • [14] Xie M., Zhou K., Zhao S., Et al., A new location method of local defects in power cables based on reflection coefficient spectrum, Power System Technology, 9, 9, pp. 3083-3089, (2017)
  • [15] Van Der Wielen P.C.J.M., On-line detection and location of partial discharges in medium-voltage power cables, (2005)
  • [16] Thomas A.J., Saha T.K., A new dielectric response model for water tree degraded XLPE Insulation - Part A: model development with small sample verification, IEEE Transactions on Dielectrics and Electrical Insulation, 15, 4, pp. 1131-1143, (2008)
  • [17] Qian Y., Huang C., Chen C., Et al., Application of multi-wavelet based on denoising algorithm in partial discharge detection, Proceedings of the CSEE, 27, 6, pp. 89-94, (2007)
  • [18] Tang J., Gao L., Xie Y., Et al., Suppressing PD's periodicity narrow band noise in the PD measurement by using complex wavelet packet transform, High Voltage Engineering, 34, 11, pp. 2355-2361, (2008)
  • [19] Sheng B., Zhou C., Hepburn D., Et al., Partial discharge pulse propagation in power cable and partial discharge monitoring system, IEEE Transactions on Dielectrics and Electrical Insulation, 21, 3, pp. 948-956, (2014)
  • [20] Zhou K., Zhao S., He M., Et al., An oscillating wave test method based on traveling wave characteristics of partial discharges for defect location in short cables, Power System Technology, 6, 6, pp. 2047-2053, (2017)