Microstructure and Fatigue Properties of Nodular Cast Iron at Low Frequency Cyclic Loading

被引：0
|
作者：
Vaško A. [1 ]
Belan J. [1 ]
Markovičová L. [1 ]
Tillová E. [1 ]
机构：
[1] Department of Materials Engineering, Faculty of Mechanical Engineering, University of Žilina, Univerzitná 8215/1, Žilina
来源：
Vaško, Alan | 1600年 / Jan-Evangelista-Purkyne-University卷 / 16期
关键词：
Fatigue tests; Mechanical tests; Metallographic analysis; Microfractographic analysis; Nodular cast iron;
D O I：
10.21062/UJEP/X.2016/A/1213-2489/MT/16/5/1188
中图分类号：
学科分类号：
摘要：
The paper deals with the influence of charge composition on microstructure, mechanical and fatigue properties of synthetic nodular cast irons and their micromechanisms of failure. The basic charge of experimental melts was formed by a different ratio of pig iron and steel scrap. Chemical composition of individual melts was regulated alternatively by silicon carbide (SiC) or ferrosilicon (FeSi) and carburizer. The specimens from three melts of nodular cast iron with different microstructure and mechanical properties were used for experiments. Fatigue tests were realised at low frequency sinusoidal cyclic push-pull loading (stress ratio R = -1) at ambient temperature (T = 20 ± 5 °C). They were carried out with using the fatigue experimental machine Zwick/Roell Amsler 150HFP 5100 at frequency f » 120 Hz. © 2016 Published by Manufacturing Technology. All Rights Reserved.
引用
收藏
页码：108 / 108
相关论文
共 50 条
  • [1] FATIGUE PROPERTIES OF NODULAR CAST IRON AT LOW FREQUENCY CYCLIC LOADING
    Vasko, A.
    ARCHIVES OF METALLURGY AND MATERIALS, 2017, 62 (04) : 2205 - 2210
  • [2] Comparison of fatigue properties of nodular cast iron at low and high frequency cyclic loading
    Vasko, Alan
    Vasko, Milan
    Belan, Juraj
    Tillova, Eva
    XXI POLISH-SLOVAK SCIENTIFIC CONFERENCE MACHINE MODELING AND SIMULATIONS MMS 2016, 2017, 177 : 576 - 581
  • [3] Fatigue tests of nodular cast iron at low and high frequency cyclic loading
    Vasko, Alan
    Belan, Juraj
    MATERIALS TODAY-PROCEEDINGS, 2017, 4 (05) : 5985 - 5988
  • [4] Fatigue of nodular cast iron at high frequency loading
    Vasko, A.
    Hurtalova, L.
    Uhricik, M.
    Tillova, E.
    MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK, 2016, 47 (5-6) : 436 - 443
  • [5] Study of the fatigue behaviour of synthetic nodular cast irons at low and high frequency cyclic loading
    Vasko, Alan
    Belan, Juraj
    Tillova, Eva
    XXII SLOVAK-POLISH SCIENTIFIC CONFERENCE ON MACHINE MODELLING AND SIMULATIONS 2017 (MMS 2017), 2018, 157
  • [6] Microstructure influence on fatigue behaviour of nodular cast iron
    Canzar, P.
    Tonkovic, Z.
    Kodvanj, J.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2012, 556 : 88 - 99
  • [7] Microstructure and tensile properties of grey cast iron under low frequency thermal fatigue loads
    Lan, Peng
    Li, Yang
    Zhang, Jia-Quan
    Cailiao Rechuli Xuebao/Transactions of Materials and Heat Treatment, 2014, 35 (04): : 149 - 155
  • [8] Fatigue of nodular cast iron
    Zuidema, J
    Wijnmaalen, L
    van Eldijk, G
    FATIGUE '99: PROCEEDINGS OF THE SEVENTH INTERNATIONAL FATIGUE CONGRESS, VOLS 1-4, 1999, : 2071 - 2076
  • [9] Microstructure and Properties of the Nitrided Layer of Nodular Cast Iron
    Liu, Qingsong
    Zhuang, Lei
    Liu, Xu
    MATERIALS PERFORMANCE AND CHARACTERIZATION, 2019, 8 (01) : 612 - 616
  • [10] Low and high frequency fatigue tests of nodular cast irons
    Vaško, A.
    Belan, J.
    Kuchariková, L.
    Tillová, E.
    Metalurgija, 2017, 56 (1-2): : 25 - 28
12345