Research on grain growth in porous alumina ceramics using graphite as pore-forming agent

被引:0
|
作者
Shen, Qian-Qian [1 ]
Tian, Dong [1 ]
Guo, Li-Hua [1 ]
Wang, Shu-Hua [1 ,2 ]
Jia, Hu-Sheng [1 ,2 ]
机构
[1] College of Materials Science and Engineering, Taiyuan University of Technology, Taiyuan 030024, China
[2] Key Laboratory of Interface Science and Engineering in Advanced Materials, Taiyuan University of Technology, Taiyuan 030024, China
关键词
Grain growth - Graphite - Sintering - Ceramic materials - Alumina - Grain size and shape - Aluminum oxide;
D O I
暂无
中图分类号
学科分类号
摘要
The effect of sintering temperature, holding time and content of graphite on the porosity and grain size of the ceramics in graphite-alumina biphasic system were investigated. The results showed that the grain size increased and porosity decreased as sintering temperature or holding time increasing. With the increase of graphite content, porosity obviously increased, while the grain size did not obviously change. On the basis of above experiments, the logarithmic relationship between grain growth and holding time was simulated. It was found that the grain growth index of porous alumina is 2.95, which is basically tallies with theoretical value.
引用
收藏
页码:1176 / 1180
相关论文
共 50 条
  • [31] Characterization of porous silicon nitride ceramics by pressureless sintering using fly ash cenosphere as a pore-forming agent
    Shao, Yingfeng
    Jia, Dechang
    Liu, Boyang
    JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2009, 29 (08) : 1529 - 1534
  • [32] Formation of Porous Wollastonite-based Ceramics after Sintering With Yeast as the Pore-forming Agent
    Obradovic, Nina
    Filipovic, Suzana
    Rusmirovic, Jelena
    Postole, Georgeta
    Marinkovic, Aleksandar
    Radic, Danka
    Rakic, Vesna
    Pavlovic, Vladimir
    Auroux, Aline
    SCIENCE OF SINTERING, 2017, 49 (03) : 235 - 246
  • [33] Carbon Fibers and Graphite as Pore-Forming Agents for the Obtention of Porous Alumina: Correlating Physical and Fractal Characteristics
    Fang, Litong
    Chen, Chang
    Wang, Yubin
    FRACTAL AND FRACTIONAL, 2022, 6 (09)
  • [34] Porous polyimide films obtained by using lithium chloride as pore-forming agent
    Chisca, Stefan
    Sava, Ion
    Bruma, Maria
    POLYMER INTERNATIONAL, 2013, 62 (11) : 1634 - 1643
  • [35] Porous ceramic bodies using banana stem waste as a pore-forming agent
    Sengphet, K. K. D.
    Sato, T.
    Fauzi, M. N. Ahmad
    Othman, R.
    FRONTIERS IN MATERIALS AND MINERALS ENGINEERING, 2014, 858 : 131 - +
  • [36] Porous ceramics derived from steel slag/coal gangue mixtures using cigarette butts as the pore-forming agent
    Liu, Wenjie
    Wang, Yang
    Li, Jingtao
    Li, Baorang
    INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY, 2023, 20 (06) : 3584 - 3595
  • [37] Fabrication and microstructure of porous SiC ceramics using suspension emulsions as pore-forming agents
    Ge, Huibin
    Wang, Gang
    Yuan, Bo
    Dong, Binbin
    Li, Hongxia
    CERAMICS INTERNATIONAL, 2014, 40 (08) : 11705 - 11711
  • [38] Preparation of Porous Al2O3 Ceramics by Gelcasting with PMMA as Pore-forming Agent
    Hao B.
    Cheng S.
    Zhang J.
    Wang C.
    Kuei Suan Jen Hsueh Pao/Journal of the Chinese Ceramic Society, 2019, 47 (09): : 1242 - 1246
  • [39] Porous Si3N4 ceramics with hierarchical pore structures prepared by gelcasting using DMAA as gelling agent and PS as pore-forming agent
    Yin, Shuang
    Pan, Limei
    Huang, Kai
    Qiu, Tai
    Yang, Jian
    JOURNAL OF ALLOYS AND COMPOUNDS, 2019, 805 : 69 - 77
  • [40] An innovative nano-porous copper composite without using a pore-forming agent
    Yehia, Hossam M.
    Elkady, Omayma A.
    El-Geassy, Abdel-Hady A.
    Abd-elmotaleb, Tamer
    Bahlol, Mohamed
    Kamal, Abdullah
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 2024, 238 (12) : 1736 - 1749