Fabrication and properties of surface porous NiTi-Hydroxyapatite/NiTi biocomposites

被引：0
|
作者：
Li Z. [1 ,2 ]
Zhang L. [1 ,2 ]
Zhang Y. [1 ,2 ,3 ]
Jiang Y. [1 ,2 ]
Zhou R. [1 ,2 ]
机构：
[1] School of Materials Science and Engineering, Kunming University of Science and Technology, Kunming
[2] National-local Joint Engineering Laboratory of Metal Advanced Solidification Forming and Equipment Technology, Kunming
[3] Engineering Technology Research Center of Titanium Products and Application of Yunnan Province, Kunming
来源：
Zhang, Yuqin (zyqkust@163.com) | 1600年 / Beijing University of Aeronautics and Astronautics (BUAA)卷 / 34期
关键词：
In vitro biological activity; Mechanical properties; Microstructure; NiTi biocomposites; Spark plasma sintering technology;
D O I：
10.13801/j.cnki.fhclxb.20161014.001
中图分类号：
学科分类号：
摘要：
Surface porous NiTi-Hydroxyapatite(HA)/NiTi biocomposites were prepared by spark plasma sintering (SPS) technology. The effects of different sintering temperatures on the macroscopic morphology, microstructure, surface pore characteristics, mechanical properties and in vitro biological activity of the composites were investigated. The results show that the NiTi-HA/NiTi biocomposites are consisted of complex Ti, Ni, Ti2Ni, Ni3Ti, HA mixed phase and gradually transformed into a single NiTi+HA phase with increasing of sintering temperatures form 800℃ to 950℃. Furthermore, a stable metallurgical bonding on the internal and external interface of the composites can be observed. Meanwhile, the porosity and average pore size of surface layer are in a slowly decreasing trend. As a result, compressive strength of the composites is significantly increased, but compressive elastic modulus of the composites is changed not obvious. Compared with NiTi, porous NiTi and porous NiTi-HA, NiTi-HA/NiTi biocomposites sintered at 950℃ not only exhibits a best match with better interface bonding, good surface pore characteristics (45.6% porosity as well as 393 μm average pore size), higher compressive strength (1 301 MPa), lower the compressive elastic modulus (10.2 GPa) and excellent superelastic recovery strain (>4%), but also showes a good in vitro biological activity. © 2017,Chinese Society for Composite Materials. All right reserved.
引用
收藏
页码：1540 / 1546
页数：6
相关论文
共 18 条
  • [11] Lee J., Hwang J., Lee D.J., Et al., Enhanced mechanical properties of spark plasma sintered NiTi composites reinforced with carbon nanotubes, Journal of Alloys and Compounds, 617, pp. 505-510, (2014)
  • [12] Li H., Yuan B., Gao Y., Et al., High-porosity NiTi superelastic alloys fabricated by low-pressure sintering using titanium hydride as pore-forming agent, Journal of Materials Science, 44, 3, pp. 875-881, (2009)
  • [13] Gibson L.J., Ashby M.F., Cellular Solids: Structure and Properties, (1997)
  • [14] Kim S.W., Jung H.D., Kang M.H., Et al., Fabrication of porous titanium scaffold with controlled porous structure and net-shape using magnesium as spacer, Materials Science and Engineering, 33, pp. 2808-2815, (2013)
  • [15] Zhang L., He Z.Y., Zhang Y.Q., Et al., Enhanced in vitro bioactivity of porous NiTi-HA composites with interconnected pore characteristics prepared by spark plasma sintering, Materials & Design, 101, pp. 170-180, (2016)
  • [16] Standard test methods of compression testing of metallic materials at room temperature: ASTM E9-89a, (2000)
  • [17] Wegrzyn J., Kaufman K.R., Hanssen A.D., Et al., Performance of porous tantalum vs. titanium cup in total hip arthroplasty: Randomized trial with minimum 10-year follow-up, The Journal of Arthroplasty, 30, 6, pp. 1008-1013, (2015)
  • [18] Li D., Zhang Y., Eggeler G., Et al., High porosity and high-strength porous NiTi shape memory alloys with controllable pore characteristics, Journal of Alloys and Compounds, 470, pp. 1-5, (2009)
12