Study on the materials and energy condition of using four furnace charges in EAF steelmaking process

被引：0

作者：

Yu, Jian ^{[1
]}

Li, Shi-Qi ^{[1
]}

Sun, Kai-Ming ^{[2
]}

Wang, Hui-Bin ^{[2
]}

Zhang, Lian-Jun ^{[2
]}

机构：

[1] School of Metallurgical and Ecological Engineering, University of Science and Technology Beijing, Beijing 100083, China

[2] Tianjin Pipe Group Co. Ltd., Tianjin 300301, China

来源：

Beijing Keji Daxue Xuebao/Journal of University of Science and Technology Beijing | 2009年 / 31卷 / SUPPL. 1期

关键词：

Iron and steel industry - Electric utilities - Regression analysis - Scrap metal reprocessing - Electric furnaces - Steelmaking furnaces - Iron scrap - Steelmaking - Steel scrap;

D O I：

暂无

中图分类号：

学科分类号：

摘要：

The 150 t EAF steelmaking of Tianjin Pipe Group Co., Ltd uses four furnace charges for a long time, its average furnace charge is scrap of 46.2%, pig iron of 9.1%, hot molten iron of 26.4%, and DRI of 18.3%, the material and energy consumptions in the EAF steelmaking process were analyzed through the material and energy balance calculations. The influence of unit furnace charge on the material and energy consumptions in research process was obtained, as well as the input scope of electric power required by the compositions change of four furnace charge is 153~744 kW. Based on the stepwise regression analysis to the mass production data, it is found that the influence of RDRI is most remarkable. If it increases 1.0% every time, the electric power consumption per ton steel probably increases 1.4 kWh. Next impact factor is RHM. If it increases 1.0% every time, the electric power consumption per ton steel probably reduces 2.0 kWh.

引用

页码：80 / 83

共 50 条

[41] Simulation study on heat energy recovery technology of furnace-process phosphoric acid process
Du J.
Zhai C.
Zhu Y.
Xie D.
Mei Y.
Mei, Yi (meiyi_412@sina.com); Mei, Yi (meiyi_412@sina.com), 1600, Materials China (72): : 5790 - 5799
[42] Efficiency of Using Briquettes From Technogenic and Natural Raw Materials in Blast Furnace Process
Kurunov, I. F.
Titov, V. N.
Scheglov, E. M.
Tikhonov, D. N.
Kononov, A. I.
JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL, 2009, 16 : 678 - 684
[43] Microstructural, thermochemistry and mechanical evaluation of self-reducing pellets using electric arc furnace (EAF) dust containing zinc for Waelz process
Hernandez Buitrago, Leidy Julieth
Prada, Ivan Daza
Amaral-Labat, Gisele
Beneduce Neto, Flavio
Bernardo Lenz e Silva, Guilherme Frederico
MATERIA-RIO DE JANEIRO, 2018, 23 (02):
[44] FREE-ENERGY OF CHARGES IN SOLVATED PROTEINS - MICROSCOPIC CALCULATIONS USING A REVERSIBLE CHARGING PROCESS
WARSHEL, A
SUSSMAN, F
KING, G
BIOCHEMISTRY, 1986, 25 (26) : 8368 - 8372
[45] Performance Study of Stamping Process Using Condition Monitoring: A Review
Badgujar, Tushar Y.
Wani, Vijay P.
PROCEEDINGS OF INTERNATIONAL CONFERENCE ON INTELLIGENT MANUFACTURING AND AUTOMATION (ICIMA 2018), 2019, : 521 - 529
[46] EXPERIMENTAL-STUDY ON AN OXYGEN BLAST-FURNACE PROCESS USING A BLAST-FURNACE TEST PLANT
YAMAOKA, H
KAMEI, Y
TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1991, 77 (12): : 2099 - 2106
[47] Using of image processing to study impregnation process in materials
Damdinova, Tatvana
Radnaeva, Vera
Zhimbueva, Lubov
2016 DYNAMICS OF SYSTEMS, MECHANISMS AND MACHINES (DYNAMICS), 2016,
[48] Towards green steel-energy and CO2 assessment of low carbon steelmaking via hydrogen based shaft furnace direct reduction process
Lu, Shaofeng
Liu, Zhengjian
Wang, Yaozu
Zhang, Jianliang
ENERGY, 2024, 309
[49] Computational Study on Furnace Process in a Multi-burner Boiler of Pulverized Coal Fired Tangentially at Four Corners
ZHOU Ping
Journal of Central South University of Technology(English Edition), 2000, (03) : 152 - 155
[50] Computational study on furnace process in a multi-burner boiler of pulverized coal fired tangentially at four corners
Zhou, P
Mei, C
Cong, GC
JOURNAL OF CENTRAL SOUTH UNIVERSITY OF TECHNOLOGY, 2000, 7 (03): : 152 - 155

← 1 2 3 4 5 →